/* Copyright 2017 Paul Ewing This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef CONFIG_H #define CONFIG_H #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0001 #define MANUFACTURER You #define PRODUCT speedo #define DESCRIPTION A custom keyboard /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 14 /* * Keyboard Matrix Assignments * * Change this to how you wired your keyboard * COLS: AVR pins used for columns, left to right * ROWS: AVR pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ //#define MATRIX_ROW_PINS { D0, D5 } #define MATRIX_ROW_PINS { D1, D2, D3, C6, C7 } #define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, D0, B7, B3, B2, B1, B0 } #define UNUSED_PINS { D5, D4, D6, D7, B4 } /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST /* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* If defined, GRAVE_ESC will always act as ESC when CTRL is held. * This is userful for the Windows task manager shortcut (ctrl+shift+esc). */ // #define GRAVE_ESC_CTRL_OVERRIDE /* * Force NKRO * * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * makefile for this to work.) * * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * until the next keyboard reset. * * NKRO may prevent your keystrokes from being detected in the BIOS, but it is * fully operational during normal computer usage. * * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by * bootmagic, NKRO mode will always be enabled until it is toggled again during a * power-up. * */ //#define FORCE_NKRO /* * Magic Key Options * * Magic keys are hotkey commands that allow control over firmware functions of * the keyboard. They are best used in combination with the HID Listen program, * found here: https://www.pjrc.com/teensy/hid_listen.html * * The options below allow the magic key functionality to be changed. This is * useful if your keyboard/keypad is missing keys and you want magic key support. * */ /* control how magic key switches layers */ //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false /* override magic key keymap */ //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM //#define MAGIC_KEY_HELP1 H //#define MAGIC_KEY_HELP2 SLASH //#define MAGIC_KEY_DEBUG D //#define MAGIC_KEY_DEBUG_MATRIX X //#define MAGIC_KEY_DEBUG_KBD K //#define MAGIC_KEY_DEBUG_MOUSE M //#define MAGIC_KEY_VERSION V //#define MAGIC_KEY_STATUS S //#define MAGIC_KEY_CONSOLE C //#define MAGIC_KEY_LAYER0_ALT1 ESC //#define MAGIC_KEY_LAYER0_ALT2 GRAVE //#define MAGIC_KEY_LAYER0 0 //#define MAGIC_KEY_LAYER1 1 //#define MAGIC_KEY_LAYER2 2 //#define MAGIC_KEY_LAYER3 3 //#define MAGIC_KEY_LAYER4 4 //#define MAGIC_KEY_LAYER5 5 //#define MAGIC_KEY_LAYER6 6 //#define MAGIC_KEY_LAYER7 7 //#define MAGIC_KEY_LAYER8 8 //#define MAGIC_KEY_LAYER9 9 //#define MAGIC_KEY_BOOTLOADER PAUSE //#define MAGIC_KEY_LOCK CAPS //#define MAGIC_KEY_EEPROM E //#define MAGIC_KEY_NKRO N //#define MAGIC_KEY_SLEEP_LED Z /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION /* * MIDI options */ /* Prevent use of disabled MIDI features in the keymap */ //#define MIDI_ENABLE_STRICT 1 /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ //#define MIDI_BASIC /* enable advanced MIDI features: - MIDI notes can be added to the keymap - Octave shift and transpose - Virtual sustain, portamento, and modulation wheel - etc. */ //#define MIDI_ADVANCED /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 #endif