summaryrefslogtreecommitdiffstats
path: root/converter/sun_usb/config.h
blob: b4f0ff977a46db6319f0cfe2f6561c88adbf3a11 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifndef CONFIG_H
#define CONFIG_H

#define VENDOR_ID       0xFEED
#define PRODUCT_ID      0x3333
#define DEVICE_VER      0x0100
#define MANUFACTURER    t.m.k.
#define PRODUCT         Sun keyboard converter
#define DESCRIPTION     converts Sun keyboard protocol into USB


/* matrix size */
#define MATRIX_ROWS 16
#define MATRIX_COLS 8


/* key combination for command */
#define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
    keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)


/* Serial(USART) configuration
 *     asynchronous, negative logic, 1200baud, no flow control
 *     1-start bit, 8-data bit, non parity, 1-stop bit
 */
#define SERIAL_BAUD 1200

#define SERIAL_RXD_DDR  DDRD
#define SERIAL_RXD_PORT PORTD
#define SERIAL_RXD_PIN  PIND
#define SERIAL_RXD_BIT  2
#define SERIAL_RXD_VECT INT2_vect
#define SERIAL_RXD_INIT()  do { \
    /* pin configuration: input with pull-up */ \
    SERIAL_RXD_DDR &= ~(1<<SERIAL_RXD_BIT);     \
    SERIAL_RXD_PORT |= (1<<SERIAL_RXD_BIT);     \
    /* enable interrupt: INT2(rising edge) */   \
    EICRA |= ((1<<ISC21)|(1<<ISC20));           \
    EIMSK |= (1<<INT2);                         \
} while (0)
#define SERIAL_RXD_INT_ENTER()
#define SERIAL_RXD_INT_EXIT() do {  \
    /* clear interrupt  flag */     \
    EIFR = (1<<INTF2);              \
} while (0)
#define SERIAL_RXD_READ()    (~SERIAL_RXD_PIN&(1<<SERIAL_RXD_BIT))

#define SERIAL_TXD_DDR  DDRD
#define SERIAL_TXD_PORT PORTD
#define SERIAL_TXD_PIN  PIND
#define SERIAL_TXD_BIT  3
/* negative logic */
#define SERIAL_TXD_ON()     do { SERIAL_TXD_PORT &= ~(1<<SERIAL_TXD_BIT); } while (0)
#define SERIAL_TXD_OFF()    do { SERIAL_TXD_PORT |=  (1<<SERIAL_TXD_BIT); } while (0)
#define SERIAL_TXD_INIT()   do { \
    /* pin configuration: output */         \
    SERIAL_TXD_DDR |= (1<<SERIAL_TXD_BIT);  \
    /* idle */                              \
    SERIAL_TXD_ON();                        \
} while (0)

#endif