blob: d7374d384ed1d0d6619caf4e95e5de83f5b85229 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
|
TADA68 keyboard firmware
========================
1) from the keyboards/tada68 directory run:
```
$ make flashbin
```
2) hit the reset button on the TADA, the lights will start flashing.
3) You'll see a new drive on your computer called TADA68. Backup the original factory `FLASH.BIN` file thats inside it.
4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive.
5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
## RGB
This board has unused pins, which means that you can add some nice RGB leds, although they have no use at this moment. Not a single transparent case has been made yet. Here's where you have to solder the wires on the PCB:
|
