1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
/* Keyboard example with debug channel, for Teensy USB Development Board
* http://www.pjrc.com/teensy/usb_keyboard.html
* Copyright (c) 2008 PJRC.COM, LLC
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include "usb_keyboard_debug.h"
#include "print.h"
#define LED_CONFIG (DDRD |= (1<<6))
#define LED_ON (PORTD &= ~(1<<6))
#define LED_OFF (PORTD |= (1<<6))
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
uint8_t number_keys[10]=
{KEY_0,KEY_1,KEY_2,KEY_3,KEY_4,KEY_5,KEY_6,KEY_7,KEY_8,KEY_9};
uint16_t idle_count=0;
int main(void)
{
uint8_t b, d, mask, i, reset_idle;
uint8_t b_prev=0xFF, d_prev=0xFF;
// set for 16 MHz clock
CPU_PRESCALE(0);
// Configure all port B and port D pins as inputs with pullup resistors.
// See the "Using I/O Pins" page for details.
// http://www.pjrc.com/teensy/pins.html
DDRD = 0x00;
DDRB = 0x00;
PORTB = 0xFF;
PORTD = 0xFF;
// Initialize the USB, and then wait for the host to set configuration.
// If the Teensy is powered without a PC connected to the USB port,
// this will wait forever.
usb_init();
while (!usb_configured()) /* wait */ ;
// Wait an extra second for the PC's operating system to load drivers
// and do whatever it does to actually be ready for input
_delay_ms(1000);
// Configure timer 0 to generate a timer overflow interrupt every
// 256*1024 clock cycles, or approx 61 Hz when using 16 MHz clock
// This demonstrates how to use interrupts to implement a simple
// inactivity timeout.
TCCR0A = 0x00;
TCCR0B = 0x05;
TIMSK0 = (1<<TOIE0);
print("Begin keyboard example program\n");
print("All Port B or Port D pins are inputs with pullup resistors.\n");
print("Any connection to ground on Port B or D pins will result in\n");
print("keystrokes sent to the PC (and debug messages here).\n");
while (1) {
// read all port B and port D pins
b = PINB;
d = PIND;
// check if any pins are low, but were high previously
mask = 1;
reset_idle = 0;
for (i=0; i<8; i++) {
if (((b & mask) == 0) && (b_prev & mask) != 0) {
//usb_keyboard_press(KEY_B, KEY_SHIFT);
//usb_keyboard_press(number_keys[i], 0);
print("Port B, bit ");
phex(i);
print("\n");
reset_idle = 1;
}
if (((d & mask) == 0) && (d_prev & mask) != 0) {
//usb_keyboard_press(KEY_D, KEY_SHIFT);
//usb_keyboard_press(number_keys[i], 0);
print("Port D, bit ");
phex(i);
print("\n");
reset_idle = 1;
}
mask = mask << 1;
}
// if any keypresses were detected, reset the idle counter
if (reset_idle) {
// variables shared with interrupt routines must be
// accessed carefully so the interrupt routine doesn't
// try to use the variable in the middle of our access
cli();
idle_count = 0;
sei();
}
// now the current pins will be the previous, and
// wait a short delay so we're not highly sensitive
// to mechanical "bounce".
b_prev = b;
d_prev = d;
_delay_ms(2);
}
}
// This interrupt routine is run approx 61 times per second.
// A very simple inactivity timeout is implemented, where we
// will send a space character and print a message to the
// hid_listen debug message window.
ISR(TIMER0_OVF_vect)
{
idle_count++;
if (idle_count > 61 * 8) {
idle_count = 0;
print("Timer Event :)\n");
//usb_keyboard_press(KEY_SPACE, 0);
}
}
|
