diff options
Diffstat (limited to '.ncmpcpp/config')
| -rw-r--r-- | .ncmpcpp/config | 435 |
1 files changed, 435 insertions, 0 deletions
diff --git a/.ncmpcpp/config b/.ncmpcpp/config new file mode 100644 index 0000000..caf2f59 --- /dev/null +++ b/.ncmpcpp/config @@ -0,0 +1,435 @@ +#################################################### +## this is example configuration file, copy it to ## +## ~/.ncmpcpp/config and set up your preferences ## +#################################################### +# +##### connection settings ##### +# +## set it in order to make tag editor and renaming files work properly +# +mpd_host = "192.168.1.100" +# +#mpd_port = "6600" +# +mpd_music_dir = "/mnt/wasteland/firstwaste/Audio/Rips/flac" +# +#mpd_connection_timeout = "5" +# +#mpd_crossfade_time = "5" +# +#mpd_communication_mode = "notifications" (polling/notifications) +# +##### music visualizer ##### +## +## Note: In order to make music visualizer work you'll +## need to use mpd fifo output, whose format parameter +## has to be set to 44100:16:1. Example configuration: +## (it has to be put into mpd.conf) +## +## audio_output { +## type "fifo" +## name "My FIFO" +## path "/tmp/mpd.fifo" +## format "44100:16:1" +## } +## +# +#visualizer_fifo_path = "/tmp/mpd.fifo" +# +## +## Note: Below parameter is needed for ncmpcpp +## to determine which output provides data for +## visualizer and thus allow syncing between +## visualization and sound as currently there +## are some problems with it. +## +# +#visualizer_output_name = "My FIFO" +# +## +## Note: Below parameter defines how often ncmpcpp +## has to "synchronize" visualizer and audio outputs. +## 30 seconds is optimal value, but if you experience +## synchronization problems, set it to lower value. +## Keep in mind that sane values start with >=10. +## +# +#visualizer_sync_interval = "30" +# +## +## Note: To enable spectrum frequency visualization +## you need to compile ncmpcpp with fftw3 support. +## +# +visualizer_type = "spectrum" (spectrum/wave) +# +##### system encoding ##### +## +## ncmpcpp should detect your charset encoding +## but if it failed to do so, you can specify +## charset encoding you are using here. +## +## Note: You can see whether your ncmpcpp build +## supports charset detection by checking output +## of `ncmpcpp --version`. +## +## Note: Since MPD uses utf8 by default, setting +## this option makes sense only if your encoding +## is different. +## +# +#system_encoding = "" +# +##### delays ##### +# +## delay after playlist highlighting will be disabled (0 = don't disable) +# +#playlist_disable_highlight_delay = "5" +# +## defines how long various messages are supposed to be visible +# +#message_delay_time = "4" +# +##### song format ##### +## +## for song format you can use: +## +## %l - length +## %f - filename +## %D - directory +## %a - artist +## %A - album artist +## %t - title +## %b - album +## %y - year +## %n - track number (01/12 -> 01) +## %N - full track info (01/12 -> 01/12) +## %g - genre +## %c - composer +## %p - performer +## %d - disc +## %C - comment +## $R - begin right alignment +## +## you can also put them in { } and then it will be displayed +## only if all requested values are available and/or define alternate +## value with { }|{ } eg. {%a - %t}|{%f} +## +## Note: Format that is similar to "%a - %t" (i.e. without any additional +## braces) is equal to "{%a - %t}", so if one of the tags is missing, +## you'll get nothing. +## +## text can also have different color than the main window has, +## eg. if you want length to be green, write $3%l$9 +## +## available values: +## +## - 0 - default window color (discards all other colors) +## - 1 - black +## - 2 - red +## - 3 - green +## - 4 - yellow +## - 5 - blue +## - 6 - magenta +## - 7 - cyan +## - 8 - white +## - 9 - end of current color +## +## Note: colors can be nested. +## +# +song_list_format = "{%a - }{%t}|{$8%f$9}$R{$3(%l)$9}" +# +#song_status_format = "{{%a{ \"%b\"{ (%y)}} - }{%t}}|{%f}" +# +#song_library_format = "{%n - }{%t}|{%f}" +# +#tag_editor_album_format = "{(%y) }%b" +# +## +## Note: Below variables are for alternative version of user's interface. +## Their syntax supports all tags and colors listed above plus some extra +## markers used for text attributes. They are followed by character '$'. +## After that you can put: +## +## - b - bold text +## - u - underline text +## - r - reverse colors +## - a - use alternative character set +## +## If you don't want to use an attribute anymore, just put it again, but +## this time insert character '/' between '$' and attribute character, +## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename +## with reversed colors. +## +# +#alternative_header_first_line_format = "$b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b" +# +#alternative_header_second_line_format = "{{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}" +# +## +## Note: Below variables also supports +## text attributes listed above. +## +# +#now_playing_prefix = "> " +# +#now_playing_suffix = "$/b" +# +#browser_playlist_prefix = "$2playlist$9 " +# +#selected_item_prefix = "$6" +# +#selected_item_suffix = "$9" +# +## colors are not supported for below variable +# +#song_window_title_format = "{%a - }{%t}|{%f}" +# +##### columns settings ##### +## +## syntax of song columns list format is "column column etc." +## +## - syntax for each column is: +## +## (width of column)[column's color]{displayed tag} +## +## Note: Width is by default in %, if you want a column to +## have fixed size, add 'f' after the value, e.g. (10)[white]{a} +## will be the column that take 10% of screen (so the real column's +## width will depend on actual screen size), whereas (10f)[white]{a} +## will take 10 terminal cells, no matter how wide the screen is. +## +## - color is optional (if you want the default one, type []) +## +## Note: You can give a column additional attributes by putting appropriate +## character after displayed tag character. Available attributes are: +## +## - r - column will be right aligned +## - E - if tag is empty, empty tag marker won't be displayed +## +## You can also: +## +## - give a column custom name by putting it after attributes, +## separated with character ':', e.g. {lr:Length} gives you +## right aligned column of lengths named "Length". +## +## - define sequence of tags, that have to be displayed in case +## predecessor is empty in a way similar to the one in classic +## song format, i.e. using '|' character, e.g. {a|c|p:Owner} +## creates column named "Owner" that tries to display artist +## tag and then composer and performer if previous ones are +## not available. +## +# +song_columns_list_format = "(7f)[blue]{n} (25)[cyan]{a} (40)[]{t|f} (4f)[]{P} (26)[red]{b} (7f)[green]{l}" +# +##### various settings ##### +# +## +## Note: Custom command that will be executed each +## time song changes. Useful for notifications etc. +## +## Attention: It doesn't support song format anymore. +## Use `ncmpcpp --now-playing SONG_FORMAT` instead. +## +#execute_on_song_change = "" +execute_on_song_change = "mpc --format '%title%\n%artist%\n%album%\n%track%\n%time%' | head -n -2 > ~/.psi/tune" +# +#playlist_show_remaining_time = "no" +# +#playlist_shorten_total_times = "no" +# +#playlist_separate_albums = "no" +# +playlist_display_mode = "columns" (classic/columns) +# +browser_display_mode = "columns" (classic/columns) +# +search_engine_display_mode = "columns" (classic/columns) +# +discard_colors_if_item_is_selected = "yes" +# +#incremental_seeking = "yes" +# +#seek_time = "1" +# +autocenter_mode = "yes" +# +centered_cursor = "yes" +# +#progressbar_look = "=>" +# +#default_place_to_search_in = "database" (database/playlist) +# +user_interface = "alternative" (classic/alternative) +# +#media_library_left_column = "a" (possible values: a,y,g,c,p, legend above) +# +#default_find_mode = "wrapped" (wrapped/normal) +# +#default_space_mode = "add" (add/select) +# +#default_tag_editor_left_col = "albums" (albums/dirs) +# +#default_tag_editor_pattern = "%n - %t" +# +#header_visibility = "yes" +# +#statusbar_visibility = "yes" +# +#header_text_scrolling = "yes" +# +#fancy_scrolling = "yes" +# +#cyclic_scrolling = "no" +# +#lines_scrolled = "2" +# +#follow_now_playing_lyrics = "no" +# +#ncmpc_like_songs_adding = "no" (enabled - add/remove, disabled - always add) +# +#show_hidden_files_in_local_browser = "no" +# +#display_screens_numbers_on_start = "yes" +# +## +## How shall key_screen_switcher work? +## +## - "previous" - switch between current and last used screen +## - "sequence: 2 -> 9 -> 5" - switch between given sequence of screens. +## +## Screen numbers you can use after 'sequence' keyword are: +## +## - 1 - help +## - 2 - playlist +## - 3 - browser +## - 4 - search engine +## - 5 - media library +## - 6 - playlist editor +## - 7 - tag editor +## - 8 - outputs +## - 9 - visualizer +## - 10 - clock +## +## As you can see, above example will switch between +## playlist, visualizer and media library screens. +## +#screen_switcher_mode = "sequence: 2 -> 3" +# +## +## Note: You can define startup screen for ncmpcpp +## by choosing screen number from the list above. +## +#startup_screen = "2" +# +#jump_to_now_playing_song_at_start = "yes" +# +#ask_before_clearing_main_playlist = "no" +# +#clock_display_seconds = "no" +# +#display_volume_level = "yes" +# +#display_bitrate = "no" +# +#display_remaining_time = "no" +# +#regular_expressions = "basic" (basic/extended) +# +## +## Note: If below is enabled, ncmpcpp will ignore leading +## "The" word while sorting items in browser, tags in +## media library, etc. +## +ignore_leading_the = "yes" +# +#block_search_constraints_change_if_items_found = "yes" +# +#mouse_support = "yes" +# +#mouse_list_scroll_whole_page = "yes" +# +#empty_tag_marker = "<empty>" +# +#tag_editor_extended_numeration = "no" +# +#media_library_display_date = "yes" +# +media_library_disable_two_column_mode = "yes" +# +#enable_window_title = "yes" +# +## +## Note: You can choose default search mode for search +## engine. Available modes are: +## +## - 1 - use mpd built-in searching (no regexes, pattern matching) +## - 2 - use ncmpcpp searching (pattern matching with support for regexes, +## but if your mpd is on a remote machine, downloading big database +## to process it can take a while +## - 3 - match only exact values (this mode uses mpd function for searching +## in database and local one for searching in current playlist) +## +# +#search_engine_default_search_mode = "1" +# +## +## Note: Below variables can allow you to physically +## remove files and directories from your hdd using +## ncmpcpp's browser screen. +## +# +#allow_physical_files_deletion = "no" +# +#allow_physical_directories_deletion = "no" +# +##### lyrics support ##### +## +## supported lyrics databases: +## +## - 1 - lyricsplugin.com +## +# +#lyrics_database = "1" +# +#external_editor = "" +# +#use_console_editor = "no" (set to yes, if your editor is console app) +# +##### colors definitions ##### +# +#colors_enabled = "yes" +# +#empty_tag_color = "cyan" +# +#header_window_color = "default" +# +#volume_color = "default" +# +#state_line_color = "default" +# +#state_flags_color = "default" +# +#main_window_color = "yellow" +# +#color1 = "white" +# +#color2 = "green" +# +#main_window_highlight_color = "yellow" +# +#progressbar_color = "default" +# +#statusbar_color = "default" +# +#alternative_ui_separator_color = "black" +# +#active_column_color = "red" +# +#window_border_color = "green" +# +#active_window_border = "red" +# +media_library_display_empty_tag |