Make code launchpad/energia compatible

Signed-off-by: Florian Pritz <bluewind@xinu.at>

1 files changed, 270 insertions, 0 deletions

diff --git a/lib/launchpad/pins_energia.h b/lib/launchpad/pins_energia.h
new file mode 100644
index 0000000..d1bdb4b
--- /dev/null
+++ b/lib/launchpad/pins_energia.h
@@ -0,0 +1,270 @@
+/*
+  ************************************************************************
+  *	pins_energia.h
+  *
+  *	Energia core files for MSP430
+  *		Copyright (c) 2012 Robert Wessels. All right reserved.
+  *
+  *     Contribution: Rei VILO
+  *
+  ***********************************************************************
+  Derived from:
+  pins_arduino.h - Pin definition functions for Arduino
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2007 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+#ifndef BV
+#define BV(x) (1 << (x))
+#endif
+
+#if defined(__MSP430_HAS_USCI__)
+static const uint8_t SS      = 8;  /* P2.0 */
+static const uint8_t SCK     = 7;  /* P1.5 */
+static const uint8_t MOSI    = 15; /* P1.7 */
+static const uint8_t MISO    = 14; /* P1.6 */
+static const uint8_t TWISDA  = 14;  /* P1.6 */
+static const uint8_t TWISCL  = 15;  /* P1.7 */
+static const uint8_t UARTRXD = 3;  /* Receive  Data (RXD) at P1.1 */
+static const uint8_t UARTTXD = 4;  /* Transmit Data (TXD) at P1.2 */
+#define TWISDA_SET_MODE  (PORT_SELECTION0 | PORT_SELECTION1 /* | INPUT_PULLUP*/) /* do not enable the pull ups for this device */
+#define TWISCL_SET_MODE  (PORT_SELECTION0 | PORT_SELECTION1 /* | INPUT_PULLUP*/)
+#define UARTRXD_SET_MODE (PORT_SELECTION0 | PORT_SELECTION1 | INPUT)
+#define UARTTXD_SET_MODE (PORT_SELECTION0 | PORT_SELECTION1 | OUTPUT)
+#endif
+
+#if defined(__MSP430_HAS_USI__)
+static const uint8_t SS   = 8;  /* P2.0 */
+static const uint8_t SCK  = 7;  /* P1.5 */
+static const uint8_t MOSI = 14; /* P1.6 */
+static const uint8_t MISO = 15; /* P1.7 */
+static const uint8_t TWISDA  = 14;  /* P1.7 */
+static const uint8_t TWISCL  = 15;  /* P1.6 */
+static const uint8_t UARTRXD = 4;  /* Receive  Data (RXD) at P1.2 */
+static const uint8_t UARTTXD = 3;  /* Transmit Data (TXD) at P1.1 */
+#define TWISDA_SET_MODE  (PORT_SELECTION0 | INPUT_PULLUP)
+#define TWISCL_SET_MODE  (PORT_SELECTION0 | INPUT_PULLUP)
+#define UARTRXD_SET_MODE (PORT_SELECTION0 | INPUT)
+#define UARTTXD_SET_MODE (PORT_SELECTION0 | OUTPUT)
+#endif
+
+static const uint8_t A0  = 0;
+static const uint8_t A1  = 1;
+static const uint8_t A2  = 2;
+static const uint8_t A3  = 3;
+static const uint8_t A4  = 4;
+static const uint8_t A5  = 5;
+static const uint8_t A6  = 6;
+static const uint8_t A7  = 7;
+static const uint8_t A10 = 10; // special. This is the internal temp sensor
+
+//                      +-\/-+
+//               VCC   1|    |20  GND
+//         (A0)  P1.0  2|    |19  XIN
+//         (A1)  P1.1  3|    |18  XOUT
+//         (A2)  P1.2  4|    |17  TEST
+//         (A3)  P1.3  5|    |16  RST#
+//         (A4)  P1.4  6|    |15  P1.7  (A7) (SCL) (MISO) depends on chip
+//         (A5)  P1.5  7|    |14  P1.6  (A6) (SDA) (MOSI)
+//               P2.0  8|    |13  P2.5
+//               P2.1  9|    |12  P2.4
+//               P2.2 10|    |11  P2.3
+//                      +----+
+//
+
+// Pin names based on the silkscreen
+//
+static const uint8_t P1_0 = 2;
+static const uint8_t P1_1 = 3;
+static const uint8_t P1_2 = 4;
+static const uint8_t P1_3 = 5;
+static const uint8_t P1_4 = 6;
+static const uint8_t P1_5 = 7;
+static const uint8_t P2_0 = 8;
+static const uint8_t P2_1 = 9;
+static const uint8_t P2_2 = 10;
+static const uint8_t P2_3 = 11;
+static const uint8_t P2_4 = 12;
+static const uint8_t P2_5 = 13;
+static const uint8_t P1_6 = 14;
+static const uint8_t P1_7 = 15;
+static const uint8_t P2_7 = 18;
+static const uint8_t P2_6 = 19;
+
+static const uint8_t RED_LED = 2;
+static const uint8_t GREEN_LED = 14;
+static const uint8_t PUSH2 = 5;
+static const uint8_t TEMPSENSOR = 10; // depends on chip
+
+
+#ifdef ARDUINO_MAIN
+
+const uint16_t port_to_input[] = {
+	NOT_A_PORT,
+	(uint16_t) &P1IN,
+	(uint16_t) &P2IN,
+#ifdef __MSP430_HAS_PORT3_R__
+	(uint16_t) &P3IN,
+#endif
+};
+
+const uint16_t port_to_output[] = {
+	NOT_A_PORT,
+	(uint16_t) &P1OUT,
+	(uint16_t) &P2OUT,
+#ifdef __MSP430_HAS_PORT3_R__
+	(uint16_t) &P3OUT,
+#endif
+};
+
+const uint16_t port_to_dir[] = {
+	NOT_A_PORT,
+	(uint16_t) &P1DIR,
+	(uint16_t) &P2DIR,
+#ifdef __MSP430_HAS_PORT3_R__
+	(uint16_t) &P3DIR,
+#endif
+};
+
+const uint16_t port_to_ren[] = {
+	NOT_A_PORT,
+	(uint16_t) &P1REN,
+	(uint16_t) &P2REN,
+#ifdef __MSP430_HAS_PORT3_R__
+	(uint16_t) &P3REN,
+#endif
+};
+
+const uint16_t port_to_sel0[] = {  /* put this PxSEL register under the group of PxSEL0 */
+	NOT_A_PORT,
+	(uint16_t) &P1SEL,
+	(uint16_t) &P2SEL,
+#ifdef __MSP430_HAS_PORT3_R__
+	(uint16_t) &P3SEL,
+#endif
+};
+
+const uint16_t port_to_sel2[] = {
+	NOT_A_PORT,
+#ifdef P1SEL2_
+	(uint16_t) &P1SEL2,
+#else
+        NOT_A_PORT,
+#endif
+#ifdef P2SEL2_
+	(uint16_t) &P2SEL2,
+#else 
+        NOT_A_PORT,
+#endif
+#ifdef P3SEL2_
+	(uint16_t) &P3SEL2,
+#else
+        NOT_A_PORT,
+#endif
+};
+
+
+/* 
+ * Defines for devices with 2x TA3 timers (e.g. MSP430g2553). On the 20pin devices, upto 3 analog outputs are available
+ * T0A1, T1A1 and T1A2 
+ */
+const uint8_t digital_pin_to_timer[] = {
+	NOT_ON_TIMER, /*  dummy */
+	NOT_ON_TIMER, /*  1 - VCC */
+	NOT_ON_TIMER, /*  2 - P1.0 */
+	T0A0,         /*  3 - P1.1, note: A0 output cannot be used with analogWrite */
+	T0A1,         /*  4 - P1.2 */
+	NOT_ON_TIMER, /*  5 - P1.3 */
+	NOT_ON_TIMER, /*  6 - P1.4 note: special case. Leaving as no timer due to difficulty determining if available */
+	T0A0,         /*  7 - P1.5 note: A0 output cannot be used with analogWrite  */
+#if defined(__MSP430_HAS_T1A3__) 
+	T1A0,         /*  8 - P2.0 note: A0 output cannot be used with analogWrite */
+	T1A1,         /*  9 - P2.1 */
+	T1A1,         /* 10 - P2.2 */
+	T1A0,         /* 11 - P2.3 note: A0 output cannot be used with analogWrite  */
+	T1A2,         /* 12 - P2.4 */
+	T1A2,         /* 13 - P2.5 */
+#else
+	NOT_ON_TIMER, /*  8 - P2.0 */
+	NOT_ON_TIMER, /*  9 - P2.1 */
+	NOT_ON_TIMER, /* 10 - P2.3 */
+	NOT_ON_TIMER, /* 11 - P2.4 */
+	NOT_ON_TIMER, /* 12 - P2.5 */
+	NOT_ON_TIMER, /* 13 - P2.6 */
+#endif
+	T0A1,         /* 14 - P1.6 */
+	NOT_ON_TIMER, /* 15 - P1.7 */
+	NOT_ON_TIMER, /* 16 - /RESET */  
+	NOT_ON_TIMER, /* 17 - TEST */  
+	NOT_ON_TIMER, /* 18 - XOUT - P2.7 */
+	T0A1,         /* 19 - XIN - P2.6: */
+	NOT_ON_TIMER, /* 20 - GND */
+};
+
+const uint8_t digital_pin_to_port[] = {
+	NOT_A_PIN, /* dummy */
+	NOT_A_PIN, /* 1 */
+	P1, /* 2 */
+	P1, /* 3 */
+	P1, /* 4 */
+	P1, /* 5 */
+	P1, /* 6 */
+	P1, /* 7 */
+	P2, /* 8 */
+	P2, /* 9 */
+	P2, /* 10 */
+	P2, /* 11 */
+	P2, /* 12 */
+	P2, /* 13 */
+	P1, /* 14 */
+	P1, /* 15 */
+	NOT_A_PIN, /* 16 */
+	NOT_A_PIN, /* 17 */
+	P2, /* 18 */
+	P2, /* 19 */
+	NOT_A_PIN, /* 20 */
+};
+
+const uint8_t digital_pin_to_bit_mask[] = {
+	NOT_A_PIN, /* 0,  pin count starts at 1 */
+	NOT_A_PIN, /* 1,  VCC */
+	BV(0),     /* 2,  port P1.0 */
+	BV(1),     /* 3,  port P1.1 */
+	BV(2),     /* 4,  port P1.2 */
+	BV(3),     /* 5,  port P1.3*/
+	BV(4),     /* 6,  port P1.4 */
+	BV(5),     /* 7,  port P1.5 */
+	BV(0),     /* 8,  port P2.0 */
+	BV(1),     /* 9,  port P2.1 */
+	BV(2),     /* 10, port P2.2 */
+	BV(3),     /* 11, port P2.3 */
+	BV(4),     /* 12, port P2.4 */
+	BV(5),     /* 13, port P2.5 */
+	BV(6),     /* 14, port P1.6 */
+	BV(7),     /* 15, port P1.7 */
+	NOT_A_PIN, /* 16, RST */
+	NOT_A_PIN, /* 17, TEST */
+	BV(7),     /* 18, XOUT */
+	BV(6),     /* 19, XIN */
+	NOT_A_PIN, /* 20, GND */
+};
+#endif
+#endif