mass commit everything

Signed-off-by: Florian Pritz <bluewind@xssn.at>

1 files changed, 66 insertions, 0 deletions

diff --git a/kernel26-zen/mkinitcpio-kernel26-zen.conf b/kernel26-zen/mkinitcpio-kernel26-zen.conf
new file mode 100644
index 0000000..e694367
--- /dev/null
+++ b/kernel26-zen/mkinitcpio-kernel26-zen.conf
@@ -0,0 +1,66 @@
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES="piix ide_disk reiserfs"
+MODULES=""
+
+# BINARIES
+# This setting includes, into the CPIO image, and additional
+# binaries a given user may wish.  This is run first, so may
+# be used to override the actual binaries used in a given hook.
+# (Existing files are NOT overwritten is already added)
+# BINARIES are dependancy parsed, so you may safely ignore libraries
+BINARIES=""
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in anyway.  This is useful for config files.
+# Some users may wish to include modprobe.conf for custom module options,
+# like so:
+#    FILES="/etc/modprobe.conf"
+FILES="/etc/modprobe.d/modprobe.conf"
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'modload' may be used in place of 'udev', but is not recommended
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+#    This setup specifies all modules in the MODULES setting above.
+#    No raid, lvm2, or encrypted root is needed.
+#    HOOKS="base"
+#
+#    This setup will autodetect all modules for your system and should
+#    work as a sane default
+#    HOOKS="base udev autodetect pata scsi sata filesystems"
+#
+#    This is identical to the above, except the old ide subsystem is
+#    used for IDE devices instead of the new pata subsystem.
+#    HOOKS="base udev autodetect ide scsi sata filesystems"
+#
+#    This setup will generate a 'full' image which supports most systems.
+#    No autodetection is done.
+#    HOOKS="base udev pata scsi sata usb filesystems"
+#
+#    This setup assembles an pata raid array with an encrypted root FS.
+#    Note: See 'mkinitcpio -H raid' for more information on raid devices.
+#    HOOKS="base udev pata raid encrypt filesystems"
+#
+#    This setup loads an lvm2 volume group on a usb device.
+#    HOOKS="base udev usb lvm2 filesystems"
+HOOKS="base udev autodetect scsi sata filesystems"
+
+# COMPRESSION
+# Use this to compress the initramfs image. With kernels earlier than
+# 2.6.30, only gzip is supported, which is also the default. Newer kernels
+# support gzip, bzip2 and lzma.
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+COMPRESSION="lzma"