diff options
Diffstat (limited to 'kernel26-vserver/kernel26-vserver.install')
| -rw-r--r-- | kernel26-vserver/kernel26-vserver.install | 144 |
1 files changed, 144 insertions, 0 deletions
diff --git a/kernel26-vserver/kernel26-vserver.install b/kernel26-vserver/kernel26-vserver.install new file mode 100644 index 0000000..c6d875c --- /dev/null +++ b/kernel26-vserver/kernel26-vserver.install @@ -0,0 +1,144 @@ +# arg 1: the new package version +# arg 2: the old package version + +KERNEL_NAME=-vserver +KERNEL_VERSION=2.6.31-vs-ARCH + +post_install () { + # updating module dependencies + echo ">>> Updating module dependencies. Please wait ..." + depmod $KERNEL_VERSION + # generate init ramdisks + echo ">>> MKINITCPIO SETUP" + echo ">>> ----------------" + echo ">>> If you use LVM2, Encrypted root or software RAID," + echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ." + echo ">>> More information about mkinitcpio setup can be found here:" + echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio" + echo "" + echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." + /sbin/mkinitcpio -p kernel26${KERNEL_NAME} +} + +post_upgrade() { + pacman -Q grub &>/dev/null + hasgrub=$? + pacman -Q grub2 &>/dev/null + hasgrub2=$? + pacman -Q lilo &>/dev/null + haslilo=$? + # reminder notices + if [ $haslilo -eq 0 ]; then + echo ">>>" + if [ $hasgrub -eq 0 -o $hasgrub2 -eq 0 ]; then + echo ">>> If you use the LILO bootloader, you should run 'lilo' before rebooting." + else + echo ">>> You appear to be using the LILO bootloader. You should run" + echo ">>> 'lilo' before rebooting." + fi + echo ">>>" + fi + + if grep "/boot" /etc/fstab 2>&1 >/dev/null; then + if ! grep "/boot" /etc/mtab 2>&1 >/dev/null; then + echo "WARNING: /boot appears to be a seperate partition but is not mounted" + echo " This is most likely not what you want. Please mount your /boot" + echo " partition and reinstall the kernel unless you are sure this is OK" + fi + fi + + if [ "`vercmp $2 2.6.13`" -lt 0 ]; then + # important upgrade notice + echo ">>>" + echo ">>> IMPORTANT KERNEL UPGRADE NOTICE" + echo ">>> -------------------------------" + echo ">>> As of kernel 2.6.13, DevFS is NO LONGER AVAILABLE!" + echo ">>> If you still use DevFS, please make the transition to uDev before" + echo ">>> rebooting. If you really need to stay with DevFS for some reason," + echo ">>> then you can manually downgrade to an older version:" + echo ">>>" + echo ">>> # pacman -U http://archlinux.org/~judd/kernel/kernel26-scsi-2.6.12.2-1.pkg.tar.gz" + echo ">>>" + echo ">>> If you choose to downgrade, don't forget to add kernel26-scsi to your" + echo ">>> IgnorePkg list in /etc/pacman.conf" + echo ">>>" + echo ">>> (NOTE: The following portion applies to uDev users as well!)" + echo ">>>" + echo ">>> If you use any DevFS paths in your GRUB menu.lst, then you will not" + echo ">>> be able to boot! Change your root= parameter to use the classic" + echo ">>> naming scheme." + echo ">>>" + echo ">>> EXAMPLES:" + echo ">>> - change root=/dev/discs/disc0/part3 to root=/dev/sda3" + echo ">>> - change root=/dev/md/0 to root=/dev/md0" + echo ">>>" + fi + # generate new init ramdisk + if [ "`vercmp $2 2.6.18`" -lt 0 ]; then + echo ">>> --------------------------------------------------------------" + echo ">>> | WARNING: |" + echo ">>> |mkinitrd is not supported anymore in kernel >=2.6.18 series!|" + echo ">>> | Please change to Mkinitcpio setup. |" + echo ">>> --------------------------------------------------------------" + echo ">>>" + fi + # updating module dependencies + echo ">>> Updating module dependencies. Please wait ..." + depmod $KERNEL_VERSION + echo ">>> MKINITCPIO SETUP" + echo ">>> ----------------" + if [ "`vercmp $2 2.6.18`" -lt 0 ]; then + echo ">>> Please change your bootloader config files:" + echo ">>> Grub: /boot/grub/menu.lst | Lilo: /etc/lilo.conf" + echo "------------------------------------------------" + echo "| - initrd26.img to kernel26${KERNEL_NAME}.img |" + echo "| - initrd26-full.img to kernel26${KERNEL_NAME}-fallback.img |" + echo "------------------------------------------------" + fi + if [ "`vercmp $2 2.6.19`" -lt 0 ]; then + echo "" + echo ">>> New PATA/IDE subsystem - EXPERIMENTAL" + echo ">>> ----------" + echo ">>> To use the new pata drivers, change the 'ide' hook " + echo ">>> to 'pata' in /etc/mkinicpio.conf HOOKS=" + echo ">>> The new system changes: /dev/hd? to /dev/sd?" + echo ">>> Don't forget to modify GRUB, LILO and fstab to the" + echo ">>> new naming system. " + echo ">>> eg: hda3 --> sda3, hdc8 --> sdc8" + echo "" + echo ">>> piix/ata_piix (Intel chipsets) - IMPORTANT" + echo "----------" + echo ">>> If you have enabled ide/pata/sata HOOKs in /etc/mkinitcpio.conf" + echo ">>> the 'ata_piix' module will be used." + echo ">>> This may cause your devices to shift names, eg:" + echo ">>> - IDE: devices from hd? to sd?" + echo ">>> - SATA: sda might shift to sdc if you have 2 other disks on a PIIX IDE port." + echo ">>> To check if this will affect you, check 'mkinitcpio -M' for piix/ata_piix" + echo "" + fi + + echo ">>> If you use LVM2, Encrypted root or software RAID," + echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ." + echo ">>> More information about mkinitcpio setup can be found here:" + echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio" + echo "" + echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." +if [ "`vercmp $2 2.6.19`" -lt 0 ]; then + /sbin/mkinitcpio -p kernel26${KERNEL_NAME} -m "ATTENTION:\nIf you get a kernel panic below +and are using an Intel chipset, append 'earlymodules=piix' to the +kernel commandline" +else + /sbin/mkinitcpio -p kernel26${KERNEL_NAME} +fi +if [ "`vercmp $2 2.6.21`" -lt 0 ]; then + echo "" + echo "Important ACPI Information:" + echo ">>> Since 2.6.20.7 all possible ACPI parts are modularized." + echo ">>> The modules are located at:" + echo ">>> /lib/modules/$(uname -r)/kernel/drivers/acpi" + echo ">>> For more information about ACPI modules check this wiki page:" + echo ">>> 'http://wiki.archlinux.org/index.php/ACPI_modules'" +fi +} + +# vim:set ts=2 sw=2 et: |