Bug 586210: Make every important string printed by checksetup.pl localizable,

including the localconfig parameter descriptions
r=mkanat, a=mkanat (module owner)

6 files changed, 274 insertions, 239 deletions

diff --git a/Bugzilla/DB/Mysql.pm b/Bugzilla/DB/Mysql.pm
index 699fcfdf6..1829bc450 100644
--- a/Bugzilla/DB/Mysql.pm
+++ b/Bugzilla/DB/Mysql.pm
@@ -316,12 +316,7 @@ sub bz_setup_database {
     my ($innodb_on) = @{$self->selectcol_arrayref(
         q{SHOW VARIABLES LIKE '%have_innodb%'}, {Columns=>[2]})};
     if ($innodb_on ne 'YES') {
-        die <<EOT;
-InnoDB is disabled in your MySQL installation. 
-Bugzilla requires InnoDB to be enabled. 
-Please enable it and then re-run checksetup.pl.
-
-EOT
+        die install_string('mysql_innodb_disabled');
     }
 
 
@@ -423,17 +418,7 @@ EOT
         # We just do the check here since this check is a reliable way
         # of telling that we are upgrading from a version pre-2.20.
         if (grep($_ eq 'bz_schema', $self->bz_table_list_real())) {
-            die("\nYou are upgrading from a version before 2.20, but the"
-              . " bz_schema\ntable already exists. This means that you"
-              . " restored a mysqldump into\nthe Bugzilla database without"
-              . " first dropping the already-existing\nBugzilla database,"
-              . " at some point. Whenever you restore a Bugzilla\ndatabase"
-              . " backup, you must always drop the entire database first.\n\n"
-              . "Please drop your Bugzilla database and restore it from a"
-              . " backup that\ndoes not contain the bz_schema table. If for"
-              . " some reason you cannot\ndo this, you can connect to your"
-              . " MySQL database and drop the bz_schema\ntable, as a last"
-              . " resort.\n");
+            die install_string('bz_schema_exists_before_220');
         }
 
         my $bug_count = $self->selectrow_array("SELECT COUNT(*) FROM bugs");
@@ -447,12 +432,8 @@ EOT
         # If we're going to take longer than 5 minutes, we let the user know
         # and allow them to abort.
         if ($rename_time > 5) {
-            print "\nWe are about to rename old indexes.\n"
-                  . "The estimated time to complete renaming is "
-                  . "$rename_time minutes.\n"
-                  . "You cannot interrupt this action once it has begun.\n"
-                  . "If you would like to cancel, press Ctrl-C now..."
-                  . " (Waiting 45 seconds...)\n\n";
+            print "\n", install_string('mysql_index_renaming',
+                                       { minutes => $rename_time });
             # Wait 45 seconds for them to respond.
             sleep(45) unless Bugzilla->installation_answers->{NO_PAUSE};
         }
@@ -685,36 +666,16 @@ EOT
     my @non_utf8_tables = grep(defined($_->{Collation}) && $_->{Collation} !~ /^utf8/, @$utf_table_status);
     
     if (Bugzilla->params->{'utf8'} && scalar @non_utf8_tables) {
-        print <<EOT;
-
-WARNING: We are about to convert your table storage format to UTF8. This
-         allows Bugzilla to correctly store and sort international characters.
-         However, if you have any non-UTF-8 data in your database,
-         it ***WILL BE DELETED*** by this process. So, before
-         you continue with checksetup.pl, if you have any non-UTF-8
-         data (or even if you're not sure) you should press Ctrl-C now
-         to interrupt checksetup.pl, and run contrib/recode.pl to make all 
-         the data in your database into UTF-8. You should also back up your
-         database before continuing. This will affect every single table
-         in the database, even non-Bugzilla tables.
-
-         If you ever used a version of Bugzilla before 2.22, we STRONGLY
-         recommend that you stop checksetup.pl NOW and run contrib/recode.pl.
-
-EOT
+        print "\n", install_string('mysql_utf8_conversion');
 
         if (!Bugzilla->installation_answers->{NO_PAUSE}) {
             if (Bugzilla->installation_mode == 
                 INSTALLATION_MODE_NON_INTERACTIVE) 
             {
-                print <<EOT;
-         Re-run checksetup.pl in interactive mode (without an 'answers' file)
-         to continue.
-EOT
-                exit;
+                die install_string('continue_without_answers'), "\n";
             }
             else {
-                print "         Press Enter to continue or Ctrl-C to exit...";
+                print "\n         " . install_string('enter_or_ctrl_c');
                 getc;
             }
         }
@@ -1088,4 +1049,5 @@ sub _bz_build_schema_from_disk {
 
     return $schema;
 }
+
 1;
diff --git a/Bugzilla/Install/CPAN.pm b/Bugzilla/Install/CPAN.pm
index 1d57b08f3..0ef003d69 100644
--- a/Bugzilla/Install/CPAN.pm
+++ b/Bugzilla/Install/CPAN.pm
@@ -191,7 +191,7 @@ sub set_cpan_config {
 
         # If we can't make one, we finally try to use the Bugzilla directory.
         if (!-w $dir) {
-            print "WARNING: Using the Bugzilla directory as the CPAN home.\n";
+            print STDERR install_string('cpan_bugzilla_home'), "\n";
             $dir = "$bzlib/.cpan";
         }
     }
diff --git a/Bugzilla/Install/DB.pm b/Bugzilla/Install/DB.pm
index 33f37208f..01270aab6 100644
--- a/Bugzilla/Install/DB.pm
+++ b/Bugzilla/Install/DB.pm
@@ -1279,15 +1279,7 @@ sub _move_quips_into_db {
             $dbh->do("INSERT INTO quips (quip) VALUES (?)", undef, $_);
         }
 
-        print <<EOT;
-
-Quips are now stored in the database, rather than in an external file.
-The quips previously stored in $datadir/comments have been copied into
-the database, and that file has been renamed to $datadir/comments.bak
-You may delete the renamed file once you have confirmed that all your
-quips were moved successfully.
-
-EOT
+        print "\n", install_string('update_quips', { data => $datadir }), "\n";
         $comments->close;
         rename("$datadir/comments", "$datadir/comments.bak")
             || warn "Failed to rename: $!";
@@ -1861,9 +1853,9 @@ sub _remove_spaces_and_commas_from_flagtypes {
                 if (length($tryflagname) > 50) {
                     my $lastchanceflagname = (substr $tryflagname, 0, 47) . '...';
                     if (defined($flagtypes{$lastchanceflagname})) {
-                        print "  ... last attempt as \"$lastchanceflagname\" still failed.'\n",
-                              "Rename the flag by hand and run checksetup.pl again.\n";
-                        die("Bad flag type name $flagname");
+                        print "  ... last attempt as \"$lastchanceflagname\" still failed.'\n";
+                        die install_string('update_flags_bad_name',
+                                           { flag => $flagname }), "\n";
                     }
                     $tryflagname = $lastchanceflagname;
                 }
@@ -2747,12 +2739,7 @@ sub _change_short_desc_from_mediumtext_to_varchar {
                FROM bugs WHERE CHAR_LENGTH(short_desc) > 255');
 
         if (@$long_summary_bugs) {
-            print <<EOT;
-
-WARNING: Some of your bugs had summaries longer than 255 characters.
-They have had their original summary copied into a comment, and then
-the summary was truncated to 255 characters. The affected bug numbers were:
-EOT
+            print "\n", install_string('update_summary_truncated');
             my $comment_sth = $dbh->prepare(
                 'INSERT INTO longdescs (bug_id, who, thetext, bug_when)
                       VALUES (?, ?, ?, NOW())');
@@ -2761,10 +2748,9 @@ EOT
             my @affected_bugs;
             foreach my $bug (@$long_summary_bugs) {
                 my ($bug_id, $summary, $reporter_id) = @$bug;
-                my $summary_comment = "The original summary for this bug"
-                   . " was longer than 255 characters, and so it was truncated"
-                   . " when Bugzilla was upgraded. The original summary was:"
-                   . "\n\n$summary";
+                my $summary_comment =
+                    install_string('update_summary_truncate_comment',
+                                   { summary => $summary });
                 $comment_sth->execute($bug_id, $reporter_id, $summary_comment);
                 my $short_summary = substr($summary, 0, 252) . "...";
                 $desc_sth->execute($short_summary, $bug_id);
@@ -2849,12 +2835,8 @@ sub _move_data_nomail_into_db {
         # If there are any nomail entries remaining, move them to nomail.bad
         # and say something to the user.
         if (scalar(keys %nomail)) {
-            print <<EOT;
-
-WARNING: The following users were listed in data/nomail, but do not
-have an account here. The unmatched entries have been moved
-to $datadir/nomail.bad:
-EOT
+            print "\n", install_string('update_nomail_bad',
+                                       { data => $datadir }), "\n";
             my $nomail_bad = new IO::File("$datadir/nomail.bad", '>>');
             foreach my $unknown_user (keys %nomail) {
                 print "\t$unknown_user\n";
@@ -3281,9 +3263,10 @@ sub _fix_invalid_custom_field_names {
         next if $field->name =~ /^[a-zA-Z0-9_]+$/;
         # The field name is illegal and can break the DB. Kill the field!
         $field->set_obsolete(1);
-        print "Removing custom field '" . $field->name . "' (illegal name)... ";
+        print install_string('update_cf_invalid_name',
+                             { field => $field->name }), "\n";
         eval { $field->remove_from_db(); };
-        print $@ ? "failed:\n$@\n" : "succeeded\n";
+        warn $@ if $@;
     }
 }
 
diff --git a/Bugzilla/Install/Localconfig.pm b/Bugzilla/Install/Localconfig.pm
index d5d76cb79..956d3c72e 100644
--- a/Bugzilla/Install/Localconfig.pm
+++ b/Bugzilla/Install/Localconfig.pm
@@ -31,7 +31,7 @@ package Bugzilla::Install::Localconfig;
 use strict;
 
 use Bugzilla::Constants;
-use Bugzilla::Install::Util qw(bin_loc);
+use Bugzilla::Install::Util qw(bin_loc install_string);
 use Bugzilla::Util qw(generate_random_password);
 
 use Data::Dumper;
@@ -50,169 +50,66 @@ use constant LOCALCONFIG_VARS => (
     {
         name    => 'create_htaccess',
         default => 1,
-        desc    => <<EOT
-# If you are using Apache as your web server, Bugzilla can create .htaccess
-# files for you that will instruct Apache not to serve files that shouldn't
-# be accessed from the web browser (like your local configuration data and non-cgi
-# executable files).  For this to work, the directory your Bugzilla
-# installation is in must be within the jurisdiction of a <Directory> block
-# in the httpd.conf file that has 'AllowOverride Limit' in it.  If it has
-# 'AllowOverride All' or other options with Limit, that's fine.
-# (Older Apache installations may use an access.conf file to store these
-# <Directory> blocks.)
-# If this is set to 1, Bugzilla will create these files if they don't exist.
-# If this is set to 0, Bugzilla will not create these files.
-EOT
     },
     {
         name    => 'webservergroup',
         default => ON_WINDOWS ? '' : 'apache',
-        desc    => q{# Usually, this is the group your web server runs as.
-# If you have a Windows box, ignore this setting.
-# If you have use_suexec switched on below, this is the group Apache switches
-# to in order to run Bugzilla scripts.
-# If you do not have access to the group your scripts will run under,
-# set this to "". If you do set this to "", then your Bugzilla installation
-# will be _VERY_ insecure, because some files will be world readable/writable,
-# and so anyone who can get local access to your machine can do whatever they
-# want. You should only have this set to "" if this is a testing installation
-# and you cannot set this up any other way. YOU HAVE BEEN WARNED!
-# If you set this to anything other than "", you will need to run checksetup.pl
-# as} . ROOT_USER . qq{, or as a user who is a member of the specified group.\n}
     },
     {
         name    => 'use_suexec',
         default => 0,
-        desc    => <<EOT
-# Set this if Bugzilla runs in an Apache SuexecUserGroup environment.
-# (If your web server runs control panel software (cPanel, Plesk or similar),
-# or if your Bugzilla is to run in a shared hosting environment, then you are
-# almost certainly in an Apache SuexecUserGroup environment.)
-# If you have a Windows box, ignore this setting.
-# If set to 0, Bugzilla will set file permissions as tightly as possible.
-# If set to 1, Bugzilla will set file permissions so that it may work in an
-# SuexecUserGroup environment. The difference is that static files (CSS,
-# JavaScript and so on) will receive world read permissions.
-EOT
     },
     {
         name    => 'db_driver',
         default => 'mysql',
-        desc    => <<EOT
-# What SQL database to use. Default is mysql. List of supported databases
-# can be obtained by listing Bugzilla/DB directory - every module corresponds
-# to one supported database and the name corresponds to a driver name.
-EOT
     },
     {
         name    => 'db_host',
-        default => 'localhost',
-        desc    => 
-            "# The DNS name of the host that the database server runs on.\n"
+        default => 'localhost',           
     },
     {
         name    => 'db_name',
         default => 'bugs',
-        desc    => "# The name of the database\n"
     },
     {
         name    => 'db_user',
         default => 'bugs',
-        desc    => "# Who we connect to the database as.\n"
     },
     {
         name    => 'db_pass',
         default => '',
-        desc    => <<EOT
-# Enter your database password here. It's normally advisable to specify
-# a password for your bugzilla database user.
-# If you use apostrophe (') or a backslash (\\) in your password, you'll
-# need to escape it by preceding it with a '\\' character. (\\') or (\\)
-# (Far simpler just not to use those characters.)
-EOT
     },
     {
         name    => 'db_port',
         default => 0,
-        desc    => <<EOT
-# Sometimes the database server is running on a non-standard port. If that's
-# the case for your database server, set this to the port number that your
-# database server is running on. Setting this to 0 means "use the default
-# port for my database server."
-EOT
     },
     {
         name    => 'db_sock',
         default => '',
-        desc    => <<EOT
-# MySQL Only: Enter a path to the unix socket for MySQL. If this is
-# blank, then MySQL's compiled-in default will be used. You probably
-# want that.
-EOT
     },
     {
         name    => 'db_check',
         default => 1,
-        desc    => <<EOT
-# Should checksetup.pl try to verify that your database setup is correct?
-# (with some combinations of database servers/Perl modules/moonphase this
-# doesn't work)
-EOT
     },
     {
         name    => 'index_html',
         default => 0,
-        desc    => <<EOT
-# With the introduction of a configurable index page using the
-# template toolkit, Bugzilla's main index page is now index.cgi.
-# Most web servers will allow you to use index.cgi as a directory
-# index, and many come preconfigured that way, but if yours doesn't
-# then you'll need an index.html file that provides redirection
-# to index.cgi. Setting \$index_html to 1 below will allow
-# checksetup.pl to create one for you if it doesn't exist.
-# NOTE: checksetup.pl will not replace an existing file, so if you
-#       wish to have checksetup.pl create one for you, you must
-#       make sure that index.html doesn't already exist
-EOT
     },
     {
         name    => 'cvsbin',
-        default => \&_get_default_cvsbin,
-        desc    => <<EOT
-# For some optional functions of Bugzilla (such as the pretty-print patch
-# viewer), we need the cvs binary to access files and revisions.
-# Because it's possible that this program is not in your path, you can specify
-# its location here.  Please specify the full path to the executable.
-EOT
+        default => sub { bin_loc('cvs') },
     },
     {
         name    => 'interdiffbin',
-        default => \&_get_default_interdiffbin,
-        desc    => <<EOT
-# For some optional functions of Bugzilla (such as the pretty-print patch
-# viewer), we need the interdiff binary to make diffs between two patches.
-# Because it's possible that this program is not in your path, you can specify
-# its location here.  Please specify the full path to the executable.
-EOT
+        default => sub { bin_loc('interdiff') },
     },
     {
         name    => 'diffpath',
-        default => \&_get_default_diffpath,
-        desc    => <<EOT
-# The interdiff feature needs diff, so we have to have that path.
-# Please specify the directory name only; do not use trailing slash.
-EOT
+        default => sub { dirname(bin_loc('diff')) },
     },
     {
         name    => 'site_wide_secret',
         default => sub { generate_random_password(256) },
-        desc    => <<EOT
-# This secret key is used by your installation for the creation and
-# validation of encrypted tokens to prevent unsolicited changes,
-# such as bug changes. A random string is generated by default.
-# It's very important that this key is kept secret. It also must be
-# very long.
-EOT
     },
 );
 
@@ -229,18 +126,8 @@ sub read_localconfig {
         $s->rdo($filename);
         if ($@ || $!) {
             my $err_msg = $@ ? $@ : $!;
-            die <<EOT;
-An error has occurred while reading your 'localconfig' file.  The text of 
-the error message is:
-
-$err_msg
-
-Please fix the error in your 'localconfig' file. Alternately, rename your
-'localconfig' file, rerun checksetup.pl, and re-enter your answers.
-
-  \$ mv -f localconfig localconfig.old
-  \$ ./checksetup.pl
-EOT
+            die install_string('error_localconfig_read',
+                    { error => $err_msg, localconfig => $filename }), "\n";
         }
 
         my @read_symbols;
@@ -336,15 +223,7 @@ sub update_localconfig {
     }
 
     if (!$localconfig->{'interdiffbin'} && $output) {
-        print <<EOT
-
-OPTIONAL NOTE: If you want to be able to use the 'difference between two
-patches' feature of Bugzilla (which requires the PatchReader Perl module
-as well), you should install patchutils from:
-
-    http://cyberelk.net/tim/patchutils/
-
-EOT
+        print "\n", install_string('patchutils_missing'), "\n";
     }
 
     my @old_vars;
@@ -365,34 +244,28 @@ EOT
         }
         close $old_file;
         my $oldstuff = join(', ', @old_vars);
-        print <<EOT
-
-The following variables are no longer used in $filename, and
-have been moved to $filename_old: $oldstuff
-
-EOT
+        print install_string('lc_old_vars',
+            { localconfig => $filename, old_file => $filename_old,
+              vars => $oldstuff }), "\n";
     }
 
     # Re-write localconfig
     open(my $fh, ">$filename") || die "$filename: $!";
     foreach my $var (LOCALCONFIG_VARS) {
-        print $fh "\n", $var->{desc},
-                  Data::Dumper->Dump([$localconfig->{$var->{name}}],
-                                     ["*$var->{name}"]);
+        my $name = $var->{name};
+        my $desc = install_string("localconfig_$name", { root => ROOT_USER });
+        chomp($desc);
+        # Make the description into a comment.
+        $desc =~ s/^/# /mg;
+        print $fh $desc, "\n",
+                  Data::Dumper->Dump([$localconfig->{$name}],
+                                     ["*$name"]), "\n";
    }
 
     if (@new_vars) {
         my $newstuff = join(', ', @new_vars);
-        print <<EOT;
-
-This version of Bugzilla contains some variables that you may want to 
-change and adapt to your local settings. Please edit the file 
-$filename and rerun checksetup.pl.
-
-The following variables are new to $filename since you last ran
-checksetup.pl:  $newstuff
-
-EOT
+        print "\n", install_string('lc_new_vars',
+            { localconfig => $filename, new_vars => $newstuff }), "\n";
         exit;
     }
 
@@ -402,13 +275,6 @@ EOT
     return { old_vars => \@old_vars, new_vars => \@new_vars };
 }
 
-sub _get_default_cvsbin       { return bin_loc('cvs') }
-sub _get_default_interdiffbin { return bin_loc('interdiff') }
-sub _get_default_diffpath {
-    my $diff_bin = bin_loc('diff');
-    return dirname($diff_bin);
-}
-
 1;
 
 __END__
diff --git a/Bugzilla/Install/Requirements.pm b/Bugzilla/Install/Requirements.pm
index 12a9c20c5..25dc15665 100644
--- a/Bugzilla/Install/Requirements.pm
+++ b/Bugzilla/Install/Requirements.pm
@@ -501,16 +501,19 @@ sub _translate_feature {
 sub check_graphviz {
     my ($output) = @_;
 
-    return 1 if (Bugzilla->params->{'webdotbase'} =~ /^https?:/);
+    my $webdotbase = Bugzilla->params->{'webdotbase'};
+    return 1 if $webdotbase =~ /^https?:/;
 
-    printf("Checking for %15s %-9s ", "GraphViz", "(any)") if $output;
+    my $checking_for = install_string('checking_for');
+    my $any = install_string('any');
+    printf("%s %15s %-9s ", $checking_for, "GraphViz", "($any)") if $output;
 
     my $return = 0;
-    if(-x Bugzilla->params->{'webdotbase'}) {
-        print "ok: found\n" if $output;
+    if(-x $webdotbase) {
+        print install_string('module_ok'), "\n" if $output;
         $return = 1;
     } else {
-        print "not a valid executable: " . Bugzilla->params->{'webdotbase'} . "\n";
+        print install_string('bad_executable', { bin => $webdotbase }), "\n";
     }
 
     my $webdotdir = bz_locations()->{'webdotdir'};
@@ -519,8 +522,8 @@ sub check_graphviz {
         my $htaccess = new IO::File("$webdotdir/.htaccess", 'r') 
             || die "$webdotdir/.htaccess: " . $!;
         if (!grep(/png/, $htaccess->getlines)) {
-            print "Dependency graph images are not accessible.\n";
-            print "delete $webdotdir/.htaccess and re-run checksetup.pl to fix.\n";
+            print STDERR install_string('webdot_bad_htaccess',
+                                        { dir => $webdotdir }), "\n";
         }
         $htaccess->close;
     }
diff --git a/template/en/default/setup/strings.txt.pl b/template/en/default/setup/strings.txt.pl
index 62b645672..1c1f295a4 100644
--- a/template/en/default/setup/strings.txt.pl
+++ b/template/en/default/setup/strings.txt.pl
@@ -28,7 +28,20 @@
 
 %strings = (
     any  => 'any',
+    bad_executable => 'not a valid executable: ##bin##',
     blacklisted => '(blacklisted)',
+    bz_schema_exists_before_220 => <<'END',
+You are upgrading from a version before 2.20, but the bz_schema table
+already exists. This means that you restored a mysqldump into the Bugzilla
+database without first dropping the already-existing Bugzilla database,
+at some point. Whenever you restore a Bugzilla database backup, you must
+always drop the entire database first.
+
+Please drop your Bugzilla database and restore it from a backup that does
+not contain the bz_schema table. If for some reason you cannot do this, you
+can connect to your MySQL database and drop the bz_schema table, as a last
+resort.
+END
     checking_for => 'Checking for',
     checking_dbd      => 'Checking available perl DBD modules...',
     checking_optional => 'The following Perl modules are optional:',
@@ -44,11 +57,31 @@ EOT
 COMMANDS TO INSTALL REQUIRED MODULES (You *must* run all these commands
 and then re-run this script):
 EOT
+    continue_without_answers => <<'END',
+Re-run checksetup.pl in interactive mode (without an 'answers' file)
+to continue.
+END
+    cpan_bugzilla_home => 
+        "WARNING: Using the Bugzilla directory as the CPAN home.",
     db_enum_setup  => "Setting up choices for standard drop-down fields:",
     db_schema_init => "Initializing bz_schema...",
     db_table_new   => "Adding new table ##table##...",
     db_table_setup => "Creating tables...",
     done => 'done.',
+    enter_or_ctrl_c => "Press Enter to continue or Ctrl-C to exit...",
+    error_localconfig_read => <<'END',
+An error has occurred while reading the ##localconfig## file.  The text of
+the error message is:
+
+##error##
+
+Please fix the error in the localconfig file. Alternately, rename your
+localconfig file and re-run checksetup.pl to have it create a new
+localconfig file:
+
+  $ mv -f localconfig localconfig.old
+  $ ./checksetup.pl
+END
     extension_must_return_name => <<END,
 ##file## returned ##returned##, which is not a valid name for an extension.
 Extensions must return their name, not <code>1</code> or a number. See
@@ -92,6 +125,130 @@ then the value of the ##column## column that needs to be fixed:
 EOT
     install_module => 'Installing ##module## version ##version##...',
     installation_failed => '*** Installation aborted. Read the messages above. ***',
+    lc_new_vars => <<'END',
+This version of Bugzilla contains some variables that you may want to 
+change and adapt to your local settings. Please edit the file 
+##localconfig## and then rerun checksetup.pl.
+
+The following variables are new to ##localconfig## since you last ran
+checksetup.pl:  ##new_vars##
+END
+    lc_old_vars => <<'END',
+The following variables are no longer used in ##localconfig##, and
+have been moved to ##old_file##: ##vars##
+END
+    localconfig_create_htaccess => <<'END',
+If you are using Apache as your web server, Bugzilla can create .htaccess
+files for you, which will keep this file (localconfig) and other
+confidential files from being read over the web.
+
+If this is set to 1, checksetup.pl will create .htaccess files if 
+they don't exist.
+
+If this is set to 0, checksetup.pl will not create .htaccess files.
+END
+    localconfig_cvsbin => <<'END',
+If you want to use the CVS integration of the Patch Viewer, please specify
+the full path to the "cvs" executable here.
+END
+    localconfig_db_check => <<'END',
+Should checksetup.pl try to verify that your database setup is correct?
+With some combinations of database servers/Perl modules/moonphase this
+doesn't work, and so you can try setting this to 0 to make checksetup.pl
+run.
+END
+    localconfig_db_driver => <<'END',
+What SQL database to use. Default is mysql. List of supported databases
+can be obtained by listing Bugzilla/DB directory - every module corresponds
+to one supported database and the name of the module (before ".pm")
+corresponds to a valid value for this variable.
+END
+    localconfig_db_host => <<'END',
+The DNS name or IP address of the host that the database server runs on.
+END
+    localconfig_db_name => 
+"The name of the database. For Oracle, this is the database's SID.",
+    localconfig_db_pass => <<'END',
+Enter your database password here. It's normally advisable to specify
+a password for your bugzilla database user.
+If you use apostrophe (') or a backslash (\) in your password, you'll
+need to escape it by preceding it with a '\' character. (\') or (\)
+(It is far simpler to just not use those characters.)
+END
+    localconfig_db_port => <<'END',
+Sometimes the database server is running on a non-standard port. If that's
+the case for your database server, set this to the port number that your
+database server is running on. Setting this to 0 means "use the default
+port for my database server."
+END
+    localconfig_db_sock => <<'END',
+MySQL Only: Enter a path to the unix socket for MySQL. If this is
+blank, then MySQL's compiled-in default will be used. You probably
+want that.
+END
+    localconfig_db_user => "Who we connect to the database as.",
+    localconfig_diffpath => <<'END',
+For the "Difference Between Two Patches" feature to work, we need to know
+what directory the "diff" bin is in. (You only need to set this if you
+are using that feature of the Patch Viewer.)
+END
+    localconfig_index_html => <<'END',
+Most web servers will allow you to use index.cgi as a directory
+index, and many come preconfigured that way, but if yours doesn't
+then you'll need an index.html file that provides redirection
+to index.cgi. Setting $index_html to 1 below will allow
+checksetup.pl to create an index.html for you if it doesn't exist.
+NOTE: checksetup.pl will not replace an existing file, so if you
+      wish to have checksetup.pl create one for you, you must
+      make sure that index.html doesn't already exist.
+END
+    localconfig_interdiffbin => <<'END',
+If you want to use the "Difference Between Two Patches" feature of the
+Patch Viewer, please specify the full path to the "interdiff" executable
+here.
+END
+    localconfig_site_wide_secret => <<'END',
+This secret key is used by your installation for the creation and
+validation of encrypted tokens. These tokens are used to implement
+security features in Bugzilla, to protect against certain types of attacks.
+A random string is generated by default. It's very important that this key
+is kept secret. It also must be very long.
+END
+    localconfig_use_suexec => <<'END',
+Set this to 1 if Bugzilla runs in an Apache SuexecUserGroup environment.
+
+If your web server runs control panel software (cPanel, Plesk or similar),
+or if your Bugzilla is to run in a shared hosting environment, then you are
+almost certainly in an Apache SuexecUserGroup environment.
+
+If this is a Windows box, ignore this setting, as it does nothing.
+
+If set to 0, checksetup.pl will set file permissions appropriately for
+a normal webserver environment.
+
+If set to 1, checksetup.pl will set file permissions so that Bugzilla
+works in a SuexecUserGroup environment. 
+END
+    localconfig_webservergroup => <<'END',
+The name of the group that your web server runs as. On Red Hat
+distributions, this is usually "apache". On Debian/Ubuntu, it is 
+usually "www-data".
+
+If you have use_suexec turned on below, then this is instead the name
+of the group that your web server switches to to run cgi files.
+
+If this is a Windows machine, ignore this setting, as it does nothing.
+
+If you do not have access to the group your scripts will run under,
+set this to "". If you do set this to "", then your Bugzilla installation
+will be _VERY_ insecure, because some files will be world readable/writable,
+and so anyone who can get local access to your machine can do whatever they
+want. You should only have this set to "" if this is a testing installation
+and you cannot set this up any other way. YOU HAVE BEEN WARNED!
+
+If you set this to anything other than "", you will need to run checksetup.pl
+as ##root## or as a user who is a member of the specified group.
+END
     max_allowed_packet => <<EOT,
 WARNING: You need to set the max_allowed_packet parameter in your MySQL
 configuration to at least ##needed##. Currently it is set to ##current##.
@@ -137,6 +294,39 @@ EOT
     module_not_found => "not found",
     module_ok => 'ok',
     module_unknown_version => "found unknown version",
+    mysql_innodb_disabled => <<'END',
+InnoDB is disabled in your MySQL installation.
+Bugzilla requires InnoDB to be enabled.
+Please enable it and then re-run checksetup.pl.
+END
+    mysql_index_renaming => <<'END',
+We are about to rename old indexes. The estimated time to complete
+renaming is ##minutes## minutes. You cannot interrupt this action once
+it has begun. If you would like to cancel, press Ctrl-C now...
+(Waiting 45 seconds...)
+END
+    mysql_utf8_conversion => <<'END',
+WARNING: We are about to convert your table storage format to UTF-8. This
+         allows Bugzilla to correctly store and sort international characters.
+         However, if you have any non-UTF-8 data in your database,
+         it ***WILL BE DELETED*** by this process. So, before
+         you continue with checksetup.pl, if you have any non-UTF-8
+         data (or even if you're not sure) you should press Ctrl-C now
+         to interrupt checksetup.pl, and run contrib/recode.pl to make all
+         the data in your database into UTF-8. You should also back up your
+         database before continuing. This will affect every single table
+         in the database, even non-Bugzilla tables.
+
+         If you ever used a version of Bugzilla before 2.22, we STRONGLY
+         recommend that you stop checksetup.pl NOW and run contrib/recode.pl.
+END
+    patchutils_missing => <<'END',
+OPTIONAL NOTE: If you want to be able to use the 'difference between two
+patches' feature of Bugzilla (which requires the PatchReader Perl module
+as well), you should install patchutils from:
+
+    http://cyberelk.net/tim/patchutils/
+END
     ppm_repo_add => <<EOT,
 ***********************************************************************
 * Note For Windows Users                                              *
@@ -162,6 +352,37 @@ WARNING: The directory '##datadir##/template' could not be removed.
          deleted manually to conserve disk space.
 END
     template_removing_dir => "Removing existing compiled templates...",
+    update_cf_invalid_name => 
+        "Removing custom field '##field##', because it has an invalid name...",
+    update_flags_bad_name => <<'END',
+"##flag##" is not a valid name for a flag. Rename it to not have any spaces
+or commas.
+END
+    update_nomail_bad => <<'END',
+WARNING: The following users were listed in ##data##/nomail, but do
+not have an account here. The unmatched entries have been moved to 
+##data##/nomail.bad:
+END
+    update_summary_truncate_comment => 
+        "The original value of the Summary field was longer than 255"
+        . " characters, and so it was truncated during an upgrade."
+        . " The original summary was:\n\n##summary##",
+    update_summary_truncating => <<'END',
+WARNING: Some of your bugs had summaries longer than 255 characters.
+They have had their original summary copied into a comment, and then
+the summary was truncated to 255 characters. The affected bug numbers were:
+END
+    update_quips => <<'END',
+Quips are now stored in the database, rather than in an external file.
+The quips previously stored in ##data##/comments have been copied into
+the database, and that file has been renamed to ##data##/comments.bak
+You may delete the renamed file once you have confirmed that all your
+quips were moved successfully.
+END
+    webdot_bad_htaccess => <<END,
+WARNING: Dependency graph images are not accessible.
+Delete ##dir##/.htaccess and re-run checksetup.pl.
+END
 );
 
 1;