diff options
Diffstat (limited to 'defparams.pl')
| -rw-r--r-- | defparams.pl | 1508 |
1 files changed, 0 insertions, 1508 deletions
diff --git a/defparams.pl b/defparams.pl deleted file mode 100644 index c7202be1a..000000000 --- a/defparams.pl +++ /dev/null @@ -1,1508 +0,0 @@ -# -*- Mode: perl; indent-tabs-mode: nil -*- -# -# The contents of this file are subject to the Mozilla Public -# License Version 1.1 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.mozilla.org/MPL/ -# -# Software distributed under the License is distributed on an "AS -# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -# implied. See the License for the specific language governing -# rights and limitations under the License. -# -# The Original Code is the Bugzilla Bug Tracking System. -# -# The Initial Developer of the Original Code is Netscape Communications -# Corporation. Portions created by Netscape are -# Copyright (C) 1998 Netscape Communications Corporation. All -# Rights Reserved. -# -# Contributor(s): Terry Weissman <terry@mozilla.org> -# Dawn Endico <endico@mozilla.org> -# Dan Mosedale <dmose@mozilla.org> -# Joe Robins <jmrobins@tgix.com> -# Jacob Steenhagen <jake@bugzilla.org> -# J. Paul Reed <preed@sigkill.com> -# Bradley Baetz <bbaetz@student.usyd.edu.au> -# Joseph Heenan <joseph@heenan.me.uk> -# Erik Stambaugh <erik@dasbistro.com> -# - -# This file defines all the parameters that we have a GUI to edit within -# Bugzilla. - -# ATTENTION!!!! THIS FILE ONLY CONTAINS THE DEFAULTS. -# You cannot change your live settings by editing this file. -# Only adding new parameters is done here. Once the parameter exists, you -# must use %baseurl%/editparams.cgi from the web to edit the settings. - -# This file is included via |do|, mainly because of circular dependency issues -# (such as globals.pl -> Bugzilla::Config -> this -> Bugzilla::Config) -# which preclude compile time loading. - -# Those issues may go away at some point, and the contents of this file -# moved somewhere else. Please try to avoid more dependencies from here -# to other code - -# (Note that these aren't just added directly to Bugzilla::Config, because -# the backend prefs code is separate to this...) - -use strict; -use vars qw(@param_list); -use File::Spec; # for find_languages -use Socket; - -use Bugzilla::Config qw(:DEFAULT $templatedir $webdotdir); -use Bugzilla::Util; -use Bugzilla::Constants; - -# Checking functions for the various values -# Some generic checking functions are included in Bugzilla::Config - -sub check_sslbase { - my $url = shift; - if ($url ne '') { - if ($url !~ m#^https://([^/]+).*/$#) { - return "must be a legal URL, that starts with https and ends with a slash."; - } - my $host = $1; - if ($host =~ /:\d+$/) { - return "must not contain a port."; - } - local *SOCK; - my $proto = getprotobyname('tcp'); - socket(SOCK, PF_INET, SOCK_STREAM, $proto); - my $sin = sockaddr_in(443, inet_aton($host)); - if (!connect(SOCK, $sin)) { - return "Failed to connect to " . html_quote($host) . - ":443, unable to enable SSL."; - } - } - return ""; -} - -sub check_priority { - my ($value) = (@_); - &::GetVersionTable(); - if (lsearch(\@::legal_priority, $value) < 0) { - return "Must be a legal priority value: one of " . - join(", ", @::legal_priority); - } - return ""; -} - -sub check_severity { - my ($value) = (@_); - &::GetVersionTable(); - if (lsearch(\@::legal_severity, $value) < 0) { - return "Must be a legal severity value: one of " . - join(", ", @::legal_severity); - } - return ""; -} - -sub check_platform { - my ($value) = (@_); - &::GetVersionTable(); - if (lsearch(['', @::legal_platform], $value) < 0) { - return "Must be empty or a legal platform value: one of " . - join(", ", @::legal_platform); - } - return ""; -} - -sub check_opsys { - my ($value) = (@_); - &::GetVersionTable(); - if (lsearch(['', @::legal_opsys], $value) < 0) { - return "Must be empty or a legal operating system value: one of " . - join(", ", @::legal_opsys); - } - return ""; -} - -sub check_shadowdb { - my ($value) = (@_); - $value = trim($value); - if ($value eq "") { - return ""; - } - - if (!Param('shadowdbhost')) { - return "You need to specify a host when using a shadow database"; - } - - # Can't test existence of this because ConnectToDatabase uses the param, - # but we can't set this before testing.... - # This can really only be fixed after we can use the DBI more openly - return ""; -} - -sub check_urlbase { - my ($url) = (@_); - if ($url !~ m:^http.*/$:) { - return "must be a legal URL, that starts with http and ends with a slash."; - } - return ""; -} - -sub check_webdotbase { - my ($value) = (@_); - $value = trim($value); - if ($value eq "") { - return ""; - } - if($value !~ /^https?:/) { - if(! -x $value) { - return "The file path \"$value\" is not a valid executable. Please specify the complete file path to 'dot' if you intend to generate graphs locally."; - } - # Check .htaccess allows access to generated images - if(-e "$webdotdir/.htaccess") { - open HTACCESS, "$webdotdir/.htaccess"; - if(! grep(/ \\\.png\$/,<HTACCESS>)) { - return "Dependency graph images are not accessible.\nAssuming that you have not modified the file, delete $webdotdir/.htaccess and re-run checksetup.pl to rectify.\n"; - } - close HTACCESS; - } - } - return ""; -} - -sub check_netmask { - my ($mask) = @_; - my $res = check_numeric($mask); - return $res if $res; - if ($mask < 0 || $mask > 32) { - return "an IPv4 netmask must be between 0 and 32 bits"; - } - # Note that if we changed the netmask from anything apart from 32, then - # existing logincookies which aren't for a single IP won't work - # any more. We can't know which ones they are, though, so they'll just - # take space until they're preiodically cleared, later. - - return ""; -} - -sub check_user_verify_class { - # doeditparams traverses the list of params, and for each one it checks, - # then updates. This means that if one param checker wants to look at - # other params, it must be below that other one. So you can't have two - # params mutually dependent on each other. - # This means that if someone clears the LDAP config params after setting - # the login method as LDAP, we won't notice, but all logins will fail. - # So don't do that. - - my ($list, $entry) = @_; - for my $class (split /,\s*/, $list) { - my $res = check_multi($class, $entry); - return $res if $res; - if ($class eq 'DB') { - # No params - } elsif ($class eq 'LDAP') { - eval "require Net::LDAP"; - return "Error requiring Net::LDAP: '$@'" if $@; - return "LDAP servername is missing" unless Param("LDAPserver"); - return "LDAPBaseDN is empty" unless Param("LDAPBaseDN"); - } else { - return "Unknown user_verify_class '$class' in check_user_verify_class"; - } - } - return ""; -} - -sub check_image_converter { - my ($value, $hash) = @_; - if ($value == 1){ - eval "require Image::Magick"; - return "Error requiring Image::Magick: '$@'" if $@; - } - return ""; -} - -sub check_languages { - my @languages = split /[,\s]+/, trim($_[0]); - if(!scalar(@languages)) { - return "You need to specify a language tag." - } - foreach my $language (@languages) { - if( ! -d "$templatedir/$language/custom" - && ! -d "$templatedir/$language/default") { - return "The template directory for $language does not exist"; - } - } - return ""; -} - -sub find_languages { - my @languages = (); - opendir(DIR, $templatedir) || return "Can't open 'template' directory: $!"; - foreach my $dir (readdir(DIR)) { - next unless $dir =~ /^([a-z-]+)$/i; - my $lang = $1; - next if($lang =~ /^CVS$/i); - my $deft_path = File::Spec->catdir('template', $lang, 'default'); - my $cust_path = File::Spec->catdir('template', $lang, 'custom'); - push(@languages, $lang) if(-d $deft_path or -d $cust_path); - } - closedir DIR; - return join(', ', @languages); -} - -sub check_mail_delivery_method { - my $check = check_multi(@_); - return $check if $check; - my $mailer = shift; - if ($mailer eq 'sendmail' && $^O =~ /MSWin32/i) { - # look for sendmail.exe - return "Failed to locate " . SENDMAIL_EXE - unless -e SENDMAIL_EXE; - } - return ""; -} - -# OK, here are the parameter definitions themselves. -# -# Each definition is a hash with keys: -# -# name - name of the param -# desc - description of the param (for editparams.cgi) -# type - see below -# choices - (optional) see below -# default - default value for the param -# checker - (optional) checking function for validating parameter entry -# It is called with the value of the param as the first arg and a -# reference to the param's hash as the second argument -# -# The type value can be one of the following: -# -# t -- A short text entry field (suitable for a single line) -# l -- A long text field (suitable for many lines) -# b -- A boolean value (either 1 or 0) -# m -- A list of values, with many selectable (shows up as a select box) -# To specify the list of values, make the 'choices' key be an array -# reference of the valid choices. The 'default' key should be an array -# reference for the list of selected values (which must appear in the -# first anonymous array), i.e.: -# { -# name => 'multiselect', -# desc => 'A list of options, choose many', -# type => 'm', -# choices => [ 'a', 'b', 'c', 'd' ], -# default => [ 'a', 'd' ], -# checker => \&check_multi -# } -# -# Here, 'a' and 'd' are the default options, and the user may pick any -# combination of a, b, c, and d as valid options. -# -# &check_multi should always be used as the param verification function -# for list (single and multiple) parameter types. -# -# s -- A list of values, with one selectable (shows up as a select box) -# To specify the list of values, make the 'choices' key be an array -# reference of the valid choices. The 'default' key should be one of -# those values, i.e.: -# { -# name => 'singleselect', -# desc => 'A list of options, choose one', -# type => 's', -# choices => [ 'a', 'b', 'c' ], -# default => 'b', -# checker => \&check_multi -# } -# -# Here, 'b' is the default option, and 'a' and 'c' are other possible -# options, but only one at a time! -# -# &check_multi should always be used as the param verification function -# for list (single and multiple) parameter types. - -# XXXX - would be nice for doeditparams to 'know' about types s and m, and call -# check_multi without it having to be explicitly specified here - bbaetz - -@param_list = ( - { - name => 'maintainer', - desc => 'The email address of the person who maintains this installation ' . - 'of Bugzilla.', - type => 't', - default => 'THE MAINTAINER HAS NOT YET BEEN SET' - }, - - { - name => 'urlbase', - desc => 'The URL that is the common initial leading part of all Bugzilla ' . - 'URLs.', - type => 't', - default => 'http://you-havent-visited-editparams.cgi-yet/', - checker => \&check_urlbase - }, - - { - name => 'sslbase', - desc => 'The URL that is the common initial leading part of all HTTPS ' . - '(SSL) Bugzilla URLs.', - type => 't', - default => '', - checker => \&check_sslbase - }, - - { - name => 'ssl', - desc => 'Controls when Bugzilla should enforce sessions to use HTTPS by ' . - 'using <tt>sslbase</tt>.', - type => 's', - choices => ['never', 'authenticated sessions', 'always'], - default => 'never' - }, - - { - name => 'languages' , - desc => 'A comma-separated list of RFC 1766 language tags. These ' . - 'identify the languages in which you wish Bugzilla output ' . - 'to be displayed. Note that you must install the appropriate ' . - 'language pack before adding a language to this Param. The ' . - 'language used is the one in this list with the highest ' . - 'q-value in the user\'s Accept-Language header.<br>' . - 'Available languages: ' . find_languages() , - type => 't' , - default => 'en' , - checker => \&check_languages - }, - - { - name => 'defaultlanguage', - desc => 'The UI language Bugzilla falls back on if no suitable ' . - 'language is found in the user\'s Accept-Language header.' , - type => 't' , - default => 'en' , - checker => \&check_languages - }, - - { - name => 'utf8', - desc => 'Use UTF-8 (Unicode) encoding for all text in Bugzilla. New ' . - 'installations should set this to true to avoid character encoding ' . - 'problems. Existing databases should set this to true only after ' . - 'the data has been converted from existing legacy character ' . - 'encodings to UTF-8.', - type => 'b', - default => '0', - }, - - { - name => 'cookiedomain', - desc => 'The domain for Bugzilla cookies. Normally blank. ' . - 'If your website is at "www.foo.com", setting this to ' . - '".foo.com" will also allow bar.foo.com to access ' . - 'Bugzilla cookies. This is useful if you have more than ' . - 'one hostname pointing at the same web server, and you ' . - 'want them to share the Bugzilla cookie.', - type => 't', - default => '' - }, - { - name => 'cookiepath', - desc => 'Path, relative to your web document root, to which to restrict ' . - 'Bugzilla cookies. Normally this is the URI portion of your URL ' . - 'base. Begin with a / (single slash mark). For instance, if ' . - 'Bugzilla serves from http://www.somedomain.com/bugzilla/, set ' . - 'this parameter to /bugzilla/ . Setting it to / will allow ' . - 'all sites served by this web server or virtual host to read ' . - 'Bugzilla cookies.', - type => 't', - default => '/' - }, - - { - name => 'timezone', - desc => 'The timezone that your database server lives in. If set to "", ' . - 'then the timezone won\'t be displayed with the timestamps.', - type => 't', - default => '', - }, - - { - name => 'quip_list_entry_control', - desc => 'Controls how easily users can add entries to the quip list.' . - '<ul><li>open - Users may freely add to the quip list, and ' . - 'their entries will immediately be available for viewing.</li>' . - '<li>moderated - quips can be entered, but need to be approved ' . - 'by an admin before they will be shown</li><li>closed - no new ' . - 'additions to the quips list are allowed.</li></ul>', - type => 's', - choices => ['open', 'moderated', 'closed'], - default => 'open', - checker => \&check_multi - }, - - { - name => 'useclassification', - desc => 'If this is on, Bugzilla will associate each product with a ' . - 'specific classification. But you must have "editclassification" ' . - 'permissions enabled in order to edit classifications', - type => 'b', - default => 0 - }, - - { - name => 'showallproducts', - desc => 'If this is on and useclassification is set, Bugzilla will add a' . - '"All" link in the "New Bug" page to list all available products', - type => 'b', - default => 0 - }, - - { - name => 'makeproductgroups', - desc => 'If this is on, Bugzilla will associate a bug group with each ' . - 'product in the database, and use it for querying bugs.', - type => 'b', - default => 0 - }, - - { - name => 'useentrygroupdefault', - desc => 'If this is on, Bugzilla will use product bug groups by default ' . - 'to restrict who can enter bugs. If this is on, users can see ' . - 'any product to which they have entry access in search menus. ' . - 'If this is off, users can see any product to which they have not ' . - 'been excluded by a mandatory restriction.', - type => 'b', - default => 0 - }, - - { - name => 'shadowdbhost', - desc => 'The host the shadow database is on.', - type => 't', - default => '', - }, - - { - name => 'shadowdbport', - desc => 'The port the shadow database is on. Ignored if ' . - '<tt>shadowdbhost</tt> is blank. Note: if the host is the local ' . - 'machine, then MySQL will ignore this setting, and you must ' . - 'specify a socket below.', - type => 't', - default => '3306', - checker => \&check_numeric, - }, - - { - name => 'shadowdbsock', - desc => 'The socket used to connect to the shadow database, if the host ' . - 'is the local machine. This setting is required because MySQL ' . - 'ignores the port specified by the client and connects using ' . - 'its compiled-in socket path (on unix machines) when connecting ' . - 'from a client to a local server. If you leave this blank, and ' . - 'have the database on localhost, then the <tt>shadowdbport</tt> ' . - 'will be ignored.', - type => 't', - default => '', - }, - - # This entry must be _after_ the shadowdb{host,port,sock} settings so that - # they can be used in the validation here - { - name => 'shadowdb', - desc => 'If non-empty, then this is the name of another database in ' . - 'which Bugzilla will use as a read-only copy of everything. ' . - 'This is done so that long slow read-only operations can be used ' . - 'against this db, and not lock up things for everyone else. This ' . - 'database is on the <tt>shadowdbhost</tt>, and must exist. ' . - 'Bugzilla does not update it, if you use this parameter, then ' . - 'you need to set up replication for your database', - type => 't', - default => '', - checker => \&check_shadowdb - }, - - { - name => 'LDAPserver', - desc => 'The name (and optionally port) of your LDAP server. (e.g. ' . - 'ldap.company.com, or ldap.company.com:portnum)', - type => 't', - default => '' - }, - - { - name => 'LDAPbinddn', - desc => 'If your LDAP server requires that you use a binddn and password ' . - 'instead of binding anonymously, enter it here ' . - '(e.g. cn=default,cn=user:password). ' . - 'Leave this empty for the normal case of an anonymous bind.', - type => 't', - default => '' - }, - - { - name => 'LDAPBaseDN', - desc => 'The BaseDN for authenticating users against. (e.g. ' . - '"ou=People,o=Company")', - type => 't', - default => '' - }, - - { - name => 'LDAPuidattribute', - desc => 'The name of the attribute containing the user\'s login name.', - type => 't', - default => 'uid' - }, - - { - name => 'LDAPmailattribute', - desc => 'The name of the attribute of a user in your directory that ' . - 'contains the email address.', - type => 't', - default => 'mail' - }, - - { - name => 'LDAPfilter', - desc => 'LDAP filter to AND with the <tt>LDAPuidattribute</tt> for ' . - 'filtering the list of valid users.', - type => 't', - default => '', - }, - - { - name => 'auth_env_id', - desc => 'Environment variable used by external authentication system ' . - 'to store a unique identifier for each user. Leave it blank ' . - 'if there isn\'t one or if this method of authentication ' . - 'is not being used.', - type => 't', - default => '', - }, - - { - name => 'auth_env_email', - desc => 'Environment variable used by external authentication system ' . - 'to store each user\'s email address. This is a required ' . - 'field for environmental authentication. Leave it blank ' . - 'if you are not going to use this feature.', - type => 't', - default => '', - }, - - { - name => 'auth_env_realname', - desc => 'Environment variable used by external authentication system ' . - 'to store the user\'s real name. Leave it blank if there ' . - 'isn\'t one or if this method of authentication is not being ' . - 'used.', - type => 't', - default => '', - }, - - # XXX in the future: - # - # user_verify_class and user_info_class should have choices gathered from - # whatever sits in their respective directories - # - # rather than comma-separated lists, these two should eventually become - # arrays, but that requires alterations to editparams first - - { - name => 'user_info_class', - desc => 'Mechanism(s) to be used for gathering a user\'s login information. - <add> - More than one may be selected. If the first one returns nothing, - the second is tried, and so on.<br /> - The types are: - <dl> - <dt>CGI</dt> - <dd> - Asks for username and password via CGI form interface. - </dd> - <dt>Env</dt> - <dd> - Info for a pre-authenticated user is passed in system - environment variables. - </dd> - </dl>', - type => 's', - choices => [ 'CGI', 'Env', 'Env,CGI' ], - default => 'CGI', - checker => \&check_multi - }, - - { - name => 'user_verify_class', - desc => 'Mechanism(s) to be used for verifying (authenticating) information - gathered by user_info_class. - More than one may be selected. If the first one cannot find the - user, the second is tried, and so on.<br /> - The types are: - <dl> - <dt>DB</dt> - <dd> - Bugzilla\'s built-in authentication. This is the most common - choice. - </dd> - <dt>LDAP</dt> - <dd> - LDAP authentication using an LDAP server. This method is - experimental; please see the Bugzilla documentation for more - information. Using this method requires additional parameters - to be set above. - </dd> - </dl>', - type => 's', - choices => [ 'DB', 'LDAP', 'DB,LDAP', 'LDAP,DB' ], - default => 'DB', - checker => \&check_user_verify_class - }, - - { - name => 'rememberlogin', - desc => 'Controls management of session cookies - <ul> - <li>on - Session cookies never expire (the user has to login only - once per browser).</li> - <li>off - Session cookies last until the users session ends (the user - will have to login in each new browser session).</li> - <li>defaulton/defaultoff - Default behavior as described - above, but user can choose whether bugzilla will remember his - login or not.</li> - </ul>', - type => 's', - choices => ['on', 'defaulton', 'defaultoff', 'off'], - default => 'on', - checker => \&check_multi - }, - - { - name => 'mostfreqthreshold', - desc => 'The minimum number of duplicates a bug needs to show up on the ' . - '<a href="duplicates.cgi">most frequently reported bugs page</a>. ' . - 'If you have a large database and this page takes a long time to ' . - 'load, try increasing this number.', - type => 't', - default => '2' - }, - - { - name => 'mybugstemplate', - desc => 'This is the URL to use to bring up a simple \'all of my bugs\' ' . - 'list for a user. %userid% will get replaced with the login ' . - 'name of a user.', - type => 't', - default => 'buglist.cgi?bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&email1=%userid%&emailtype1=exact&emailassigned_to1=1&emailreporter1=1' - }, - - { - name => 'shutdownhtml', - desc => 'If this field is non-empty, then Bugzilla will be completely ' . - 'disabled and this text will be displayed instead of all the ' . - 'Bugzilla pages.', - type => 'l', - default => '' - }, - - { - name => 'mail_delivery_method', - desc => 'Defines how email is sent, or if it is sent at all.<br><ul>' . - '<li>\'sendmail\', \'smtp\' and \'qmail\' are all MTAs. ' . - 'You need to install a third-party sendmail replacement if ' . - 'you want to use sendmail on Windows.' . - '<li>\'testfile\' is useful for debugging: all email is stored ' . - 'in data/mailer.testfile instead of being sent. For more ' . - 'information, see the Mail::Mailer manual.</li>' . - '<li>\'none\' will completely disable email. Bugzilla continues ' . - 'to act as though it is sending mail, but nothing is sent or ' . - 'stored.</li></ul>' , - type => 's', - choices => $^O =~ /MSWin32/i - ? ['smtp', 'testfile', 'sendmail', 'none'] - : ['sendmail', 'smtp', 'qmail', 'testfile', 'none'], - default => 'sendmail', - checker => \&check_mail_delivery_method - }, - - { - name => 'sendmailnow', - desc => 'Sites using anything older than version 8.12 of \'sendmail\' ' . - 'can achieve a significant performance increase in the ' . - 'UI -- at the cost of delaying the sending of mail -- by ' . - 'disabling this parameter. Sites using \'sendmail\' 8.12 or ' . - 'higher should leave this on, as they will see no benefit from ' . - 'turning it off. Sites using an MTA other than \'sendmail\' ' . - '*must* leave it on, or no bug mail will be sent.', - type => 'b', - default => 1 - }, - - { - name => 'smtpserver', - desc => 'The SMTP server address (if using SMTP for mail delivery).', - type => 't', - default => 'localhost' - }, - - { - name => 'passwordmail', - desc => 'The email that gets sent to people to tell them their password.' . - 'Within this text, %mailaddress% gets replaced by the person\'s ' . - 'email address, %login% gets replaced by the person\'s login ' . - '(usually the same thing), and %password% gets replaced by their ' . - 'password. %<i>anythingelse</i>% gets replaced by the ' . - 'definition of that parameter (as defined on this page).', - type => 'l', - default => 'From: bugzilla-daemon -To: %mailaddress% -Subject: Your Bugzilla password. - -To use the wonders of Bugzilla, you can use the following: - - E-mail address: %login% - Password: %password% - - To change your password, go to: - %urlbase%userprefs.cgi -' - }, - - { - name => 'newchangedmail', - desc => 'The email that gets sent to people when a bug changes. Within ' . - 'this text, %to% gets replaced with the e-mail address of the ' . - 'person receiving the mail. %bugid% gets replaced by the bug ' . - 'number. %diffs% gets replaced with what\'s changed. ' . - '%neworchanged% is "New:" if this mail is reporting a new bug or ' . - 'empty if changes were made to an existing one. %summary% gets ' . - 'replaced by the summary of this bug. %reasonsheader% is ' . - 'replaced by an abbreviated list of reasons why the user is ' . - 'getting the email, suitable for use in an email header (such ' . - 'as X-Bugzilla-Reason). %reasonsbody% is replaced by text that ' . - 'explains why the user is getting the email in more user ' . - 'friendly text than %reasonsheader%. ' . - '%threadingmarker% will become either a Message-ID line (for ' . - 'new-bug messages) or a In-Reply-To line (for bug-change ' . - 'messages). ' . - '%<i>anythingelse</i>% gets ' . - 'replaced by the definition of that parameter (as defined on ' . - 'this page).', - type => 'l', - default => 'From: bugzilla-daemon -To: %to% -Subject: [Bug %bugid%] %neworchanged%%summary% -%threadingmarker% -X-Bugzilla-Reason: %reasonsheader% -X-Bugzilla-Product: %product% -X-Bugzilla-Component: %component% - -%urlbase%show_bug.cgi?id=%bugid% - -%diffs% - ---%space% -Configure bugmail: %urlbase%userprefs.cgi?tab=email -%reasonsbody%' - }, - - { - name => 'whinedays', - desc => q{The number of days that we'll let a bug sit untouched in a NEW - state before our cronjob will whine at the owner.<br> - Set to 0 to disable whining.}, - type => 't', - default => 7 - }, - - { - name => 'whinemail', - desc => 'The email that gets sent to anyone who has a NEW or REOPENED ' . - 'bug that hasn\'t been touched for more than <b>whinedays</b>. ' . - 'Within this text, %email% gets replaced by the offender\'s ' . - 'email address. %userid% gets replaced by the offender\'s ' . - 'bugzilla login (which, in most installations, is the same as ' . - 'the email address.) %<i>anythingelse</i>% gets replaced by the ' . - 'definition of that parameter (as defined on this page).<p> It ' . - 'is a good idea to make sure this message has a valid From: ' . - 'address, so that if the mail bounces, a real person can know '. - 'that there are bugs assigned to an invalid address.', - type => 'l', - default => 'From: %maintainer% -To: %email% -Subject: Your Bugzilla buglist needs attention. - -[This e-mail has been automatically generated.] - -You have one or more bugs assigned to you in the Bugzilla -bugsystem (%urlbase%) that require -attention. - -All of these bugs are in the NEW or REOPENED state, and have not -been touched in %whinedays% days or more. You need to take a look -at them, and decide on an initial action. - -Generally, this means one of three things: - -(1) You decide this bug is really quick to deal with (like, it\'s INVALID), - and so you get rid of it immediately. -(2) You decide the bug doesn\'t belong to you, and you reassign it to someone - else. (Hint: if you don\'t know who to reassign it to, make sure that - the Component field seems reasonable, and then use the "Reassign bug to - default assignee of selected component" option.) -(3) You decide the bug belongs to you, but you can\'t solve it this moment. - Just use the "Accept bug" command. - -To get a list of all NEW/REOPENED bugs, you can use this URL (bookmark -it if you like!): - - %urlbase%buglist.cgi?bug_status=NEW&bug_status=REOPENED&assigned_to=%userid% - -Or, you can use the general query page, at -%urlbase%query.cgi - -Appended below are the individual URLs to get to all of your NEW bugs that -haven\'t been touched for a week or more. - -You will get this message once a day until you\'ve dealt with these bugs! - -' - }, - - { - name => 'defaultquery', - desc => 'This is the default query that initially comes up when you ' . - 'access the advanced query page. It\'s in URL parameter ' . - 'format, which makes it hard to read. Sorry!', - type => 't', - default => 'bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&emailassigned_to1=1&emailassigned_to2=1&emailreporter2=1&emailcc2=1&emailqa_contact2=1&order=Importance&long_desc_type=substring' - }, - - { - name => 'letsubmitterchoosepriority', - desc => 'If this is on, then people submitting bugs can choose an ' . - 'initial priority for that bug. If off, then all bugs initially ' . - 'have the default priority selected below.', - type => 'b', - default => 1 - }, - - { - name => 'defaultpriority', - desc => 'This is the priority that newly entered bugs are set to.', - type => 't', - default => 'P2', - checker => \&check_priority - }, - - { - name => 'defaultseverity', - desc => 'This is the severity that newly entered bugs are set to.', - type => 't', - default => 'normal', - checker => \&check_severity - }, - - { - name => 'defaultplatform', - desc => 'This is the platform that is preselected on the bug '. - 'entry form.<br>'. - 'You can leave this empty: '. - 'Bugzilla will then use the platform that the browser '. - 'reports to be running on as the default.', - type => 't', - default => '', - checker => \&check_platform - }, - - { - name => 'defaultopsys', - desc => 'This is the operating system that is preselected on the bug '. - 'entry form.<br>'. - 'You can leave this empty: '. - 'Bugzilla will then use the operating system that the browser '. - 'reports to be running on as the default.', - type => 't', - default => '', - checker => \&check_opsys - }, - - { - name => 'usetargetmilestone', - desc => 'Do you wish to use the Target Milestone field?', - type => 'b', - default => 0 - }, - - { - name => 'letsubmitterchoosemilestone', - desc => 'If this is on, then people submitting bugs can choose the ' . - 'Target Milestone for that bug. If off, then all bugs initially ' . - 'have the default milestone for the product being filed in.', - type => 'b', - default => 1 - }, - - { - name => 'musthavemilestoneonaccept', - desc => 'If you are using Target Milestone, do you want to require that ' . - 'the milestone be set in order for a user to ACCEPT a bug?', - type => 'b', - default => 0 - }, - - { - name => 'useqacontact', - desc => 'Do you wish to use the QA Contact field?', - type => 'b', - default => 0 - }, - - { - name => 'usestatuswhiteboard', - desc => 'Do you wish to use the Status Whiteboard field?', - type => 'b', - default => 0 - }, - - { - name => 'usevotes', - desc => 'Do you wish to allow users to vote for bugs? Note that in order ' . - 'for this to be effective, you will have to change the maximum ' . - 'votes allowed in a product to be non-zero in ' . - '<a href="editproducts.cgi">the product edit page</a>.', - type => 'b', - default => 1 - }, - - { - name => 'usebugaliases', - desc => 'Do you wish to use bug aliases, which allow you to assign bugs ' . - 'an easy-to-remember name by which you can refer to them?', - type => 'b', - default => 0 - }, - - { - name => 'usevisibilitygroups', - desc => 'Do you wish to restrict visibility of users to members of ' . - 'specific groups?', - type => 'b', - default => 0 - }, - - { - name => 'webdotbase', - desc => 'It is possible to show graphs of dependent bugs. You may set ' . - 'this parameter to any of the following: - <ul> - <li>A complete file path to \'dot\' (part of <a - href="http://www.graphviz.org">GraphViz</a>) will generate the graphs - locally.</li> - <li>A URL prefix pointing to an installation of the <a - href="http://www.research.att.com/~north/cgi-bin/webdot.cgi">webdot - package</a> will generate the graphs remotely.</li> - <li>A blank value will disable dependency graphing.</li> - </ul> - The default value is a publicly-accessible webdot server. If you change - this value, make certain that the webdot server can read files from your - webdot directory. On Apache you do this by editing the .htaccess file, - for other systems the needed measures may vary. You can run checksetup.pl - to recreate the .htaccess file if it has been lost.', - type => 't', - default => 'http://www.research.att.com/~north/cgi-bin/webdot.cgi/%urlbase%', - checker => \&check_webdotbase - }, - - { - name => 'emailregexp', - desc => 'This defines the regexp to use for legal email addresses. The ' . - 'default tries to match fully qualified email addresses. Another ' . - 'popular value to put here is <tt>^[^@]+$</tt>, which means ' . - '"local usernames, no @ allowed."', - type => 't', - default => q:^[\\w\\.\\+\\-=]+@[\\w\\.\\-]+\\.[\\w\\-]+$:, - checker => \&check_regexp - }, - - { - name => 'emailregexpdesc', - desc => 'This describes in English words what kinds of legal addresses ' . - 'are allowed by the <tt>emailregexp</tt> param.', - type => 'l', - default => 'A legal address must contain exactly one \'@\', and at least ' . - 'one \'.\' after the @.' - }, - - { - name => 'emailsuffix', - desc => 'This is a string to append to any email addresses when actually ' . - 'sending mail to that address. It is useful if you have changed ' . - 'the <tt>emailregexp</tt> param to only allow local usernames, ' . - 'but you want the mail to be delivered to username@my.local.hostname.', - type => 't', - default => '' - }, - - { - name => 'createemailregexp', - desc => 'This defines the regexp to use for email addresses that are ' . - 'permitted to self-register using a "New Account" feature. The ' . - 'default (.*) permits any account matching the emailregexp ' . - 'to be created. If this parameter is left blank, no users ' . - 'will be permitted to create their own accounts and all accounts ' . - 'will have to be created by an administrator', - type => 't', - default => q:.*:, - checker => \&check_regexp - }, - - { - name => 'voteremovedmail', - desc => 'This is a mail message to send to anyone who gets a vote removed ' . - 'from a bug for any reason. %to% gets replaced by the person who ' . - 'used to be voting for this bug. %bugid% gets replaced by the ' . - 'bug number. %reason% gets replaced by a short reason describing ' . - 'why the vote(s) were removed. %votesremoved%, %votesold% and ' . - '%votesnew% is the number of votes removed, before and after ' . - 'respectively. %votesremovedtext%, %votesoldtext% and ' . - '%votesnewtext% are these as sentences, e.g. "You had 2 votes on ' . - 'this bug." %count% is also supported for backwards ' . - 'compatibility. %<i>anythingelse</i>% gets replaced by the ' . - 'definition of that parameter (as defined on this page).', - type => 'l', - default => 'From: bugzilla-daemon -To: %to% -Subject: [Bug %bugid%] Some or all of your votes have been removed. - -Some or all of your votes have been removed from bug %bugid%. - -%votesoldtext% - -%votesnewtext% - -Reason: %reason% - -%urlbase%show_bug.cgi?id=%bugid% -' - }, - - { - name => 'allowbugdeletion', - desc => 'The pages to edit products and components and versions can delete ' . - 'all associated bugs when you delete a product (or component or ' . - 'version). Since that is a pretty scary idea, you have to turn on ' . - 'this option before any such deletions will ever happen.', - type => 'b', - default => 0 - }, - - { - name => 'allowemailchange', - desc => 'Users can change their own email address through the preferences. ' . - 'Note that the change is validated by emailing both addresses, so ' . - 'switching this option on will not let users use an invalid address.', - type => 'b', - default => 0 - }, - - { - name => 'allowuserdeletion', - desc => q{The user editing pages are capable of letting you delete user - accounts. - Bugzilla will issue a warning in case you'd run into - inconsistencies when you're about to do so, - but such deletions remain kinda scary. - So, you have to turn on this option before any such deletions - will ever happen.}, - type => 'b', - default => 0 - }, - - { - name => 'commentoncreate', - desc => 'If this option is on, the user needs to enter a description ' . - 'when entering a new bug', - type => 'b', - default => 0 - }, - - { - name => 'commentonaccept', - desc => 'If this option is on, the user needs to enter a short comment if ' . - 'he accepts the bug', - type => 'b', - default => 0 - }, - - { - name => 'commentonclearresolution', - desc => 'If this option is on, the user needs to enter a short comment if ' . - 'the bug\'s resolution is cleared', - type => 'b', - default => 0 - }, - - { - name => 'commentonconfirm', - desc => 'If this option is on, the user needs to enter a short comment ' . - 'when confirming a bug', - type => 'b', - default => 0 - }, - - { - name => 'commentonresolve', - desc => 'If this option is on, the user needs to enter a short comment if ' . - 'the bug is resolved', - type => 'b', - default => 0 - }, - - { - name => 'commentonreassign', - desc => 'If this option is on, the user needs to enter a short comment if ' . - 'the bug is reassigned', - type => 'b', - default => 0 - }, - - { - name => 'commentonreassignbycomponent', - desc => 'If this option is on, the user needs to enter a short comment if ' . - 'the bug is reassigned by component', - type => 'b', - default => 0 - }, - { - name => 'commentonreopen', - desc => 'If this option is on, the user needs to enter a short comment if ' . - 'the bug is reopened', - type => 'b', - default => 0 - }, - - { - name => 'commentonverify', - desc => 'If this option is on, the user needs to enter a short comment if ' . - 'the bug is verified', - type => 'b', - default => 0 - }, - - { - name => 'commentonclose', - desc => 'If this option is on, the user needs to enter a short comment if ' . - 'the bug is closed', - type => 'b', - default => 0 - }, - - { - name => 'commentonduplicate', - desc => 'If this option is on, the user needs to enter a short comment ' . - 'if the bug is marked as duplicate', - type => 'b', - default => 0 - }, - - { - name => 'supportwatchers', - desc => 'Support one user watching (ie getting copies of all related ' . - 'email about) another\'s bugs. Useful for people going on ' . - 'vacation, and QA folks watching particular developers\' bugs', - type => 'b', - default => 0 - }, - - { - name => 'move-enabled', - desc => 'If this is on, Bugzilla will allow certain people to move bugs ' . - 'to the defined database.', - type => 'b', - default => 0 - }, - - { - name => 'move-button-text', - desc => 'The text written on the Move button. Explain where the bug is ' . - 'being moved to.', - type => 't', - default => 'Move To Bugscape' - }, - - { - name => 'move-to-url', - desc => 'The URL of the database we allow some of our bugs to be moved to.', - type => 't', - default => '' - }, - - { - name => 'move-to-address', - desc => 'To move bugs, an email is sent to the target database. This is ' . - 'the email address that database uses to listen for incoming bugs.', - type => 't', - default => 'bugzilla-import' - }, - - { - name => 'moved-from-address', - desc => 'To move bugs, an email is sent to the target database. This is ' . - 'the email address from which this mail, and error messages are ' . - 'sent.', - type => 't', - default => 'bugzilla-admin' - }, - - { - name => 'movers', - desc => 'A list of people with permission to move bugs and reopen moved ' . - 'bugs (in case the move operation fails).', - type => 't', - default => '' - }, - - { - name => 'moved-default-product', - desc => 'Bugs moved from other databases to here are assigned to this ' . - 'product.', - type => 't', - default => '' - }, - - { - name => 'moved-default-component', - desc => 'Bugs moved from other databases to here are assigned to this ' . - 'component.', - type => 't', - default => '' - }, - - # The maximum size (in bytes) for patches and non-patch attachments. - # The default limit is 1000KB, which is 24KB less than mysql's default - # maximum packet size (which determines how much data can be sent in a - # single mysql packet and thus how much data can be inserted into the - # database) to provide breathing space for the data in other fields of - # the attachment record as well as any mysql packet overhead (I don't - # know of any, but I suspect there may be some.) - - { - name => 'maxpatchsize', - desc => 'The maximum size (in kilobytes) of patches. Bugzilla will not ' . - 'accept patches greater than this number of kilobytes in size.' . - 'To accept patches of any size (subject to the limitations of ' . - 'your server software), set this value to zero.', - type => 't', - default => '1000', - checker => \&check_numeric - }, - - { - name => 'maxattachmentsize', - desc => 'The maximum size (in kilobytes) of non-patch attachments. ' . - 'Bugzilla will not accept attachments greater than this number' . - 'of kilobytes in size. To accept attachments of any size ' . - '(subject to the limitations of your server software), set this ' . - 'value to zero.', - type => 't', - default => '1000', - checker => \&check_numeric - }, - - { - name => 'maxlocalattachment', - desc => 'The maximum size (in Megabytes) of attachments identified by ' . - 'the user as "Big Files" to be stored locally on the webserver. ' . - 'If set to zero, attachments will never be kept on the local ' . - 'filesystem.', - type => 't', - default => '0', - checker => \&check_numeric - }, - - { - name => 'convert_uncompressed_images', - desc => 'If this option is on, attachments with content type image/bmp ' . - 'will be converted to image/png and compressed before uploading to'. - 'the database to conserve disk space.', - type => 'b', - default => 0, - checker => \&check_image_converter - }, - - { - name => 'chartgroup', - desc => 'The name of the group of users who can use the "New Charts" ' . - 'feature. Administrators should ensure that the public categories ' . - 'and series definitions do not divulge confidential information ' . - 'before enabling this for an untrusted population. If left blank, ' . - 'no users will be able to use New Charts.', - type => 't', - default => 'editbugs' - }, - - { - name => 'insidergroup', - desc => 'The name of the group of users who can see/change private ' . - 'comments and attachments.', - type => 't', - default => '' - }, - - { - name => 'timetrackinggroup', - desc => 'The name of the group of users who can see/change time tracking ' . - 'information.', - type => 't', - default => '' - }, - - { - name => 'loginnetmask', - desc => 'The number of bits for the netmask used if a user chooses to ' . - 'allow a login to be valid for more than a single IP. Setting ' . - 'this to 32 disables this feature.<br>' . - 'Note that enabling this may decrease the security of your system.', - type => 't', - default => '32', - checker => \&check_netmask - }, - - { - name => 'requirelogin', - desc => 'If this option is set, all access to the system beyond the ' . - ' front page will require a login. No anonymous users will ' . - ' be permitted.', - type => 'b', - default => '0' - }, - - { - name => 'usemenuforusers', - desc => 'If this option is set, a popup menu will be used where a user' . - ' needs to be selected. This option should not be enabled on' . - ' sites where there are a large number of users.', - type => 'b', - default => '0' - }, - - { - name => 'usermatchmode', - desc => 'Allow match strings to be entered for user names when entering ' . - 'and editing bugs. <p>' . - '"off" disables matching,<br> ' . - '"wildcard" allows only wildcards,<br> ' . - 'and "search" allows both wildcards and substring (freetext) ' . - 'matches.', - type => 's', - choices => ['off', 'wildcard', 'search'], - default => 'off' - }, - - { - name => 'maxusermatches', - desc => 'Search for no more than this many matches. <br>'. - 'If set to "1", no users will be displayed on ambiguous matches. '. - 'This is useful for user privacy purposes. <br>'. - 'A value of zero means no limit.', - type => 't', - default => '1000', - checker => \&check_numeric - }, - - { - name => 'confirmuniqueusermatch', - desc => 'Whether a confirmation screen should be displayed when only ' . - 'one user matches a search entry', - type => 'b', - default => 1, - }, - - { - name => 'quicksearch_comment_cutoff', - desc => q{The maximum number of search terms for a QuickSearch to search - comments. - If the QuickSearch query contains more terms than this value, - QuickSearch will not search comments.}, - type => 't', - default => '4', - checker => \&check_numeric - }, - -# Added for Patch Viewer stuff (attachment.cgi?action=diff) - { - name => 'cvsroot', - desc => 'The <a href="http://www.cvshome.org">CVS</a> root that most ' . - 'users of your system will be using for "cvs diff". Used in ' . - 'Patch Viewer ("Diff" option on patches) to figure out where ' . - 'patches are rooted even if users did the "cvs diff" from ' . - 'different places in the directory structure. (NOTE: if your ' . - 'CVS repository is remote and requires a password, you must ' . - 'either ensure the Bugzilla user has done a "cvs login" or ' . - 'specify the password ' . - '<a href="http://www.cvshome.org/docs/manual/cvs_2.html#SEC26">as ' . - 'part of the CVS root.</a>) Leave this blank if you have no ' . - 'CVS repository.', - type => 't', - default => '', - }, - - { - name => 'cvsroot_get', - desc => 'The CVS root Bugzilla will be using to get patches from. ' . - 'Some installations may want to mirror their CVS repository on ' . - 'the Bugzilla server or even have it on that same server, and ' . - 'thus the repository can be the local file system (and much ' . - 'faster). Make this the same as cvsroot if you don\'t ' . - 'understand what this is (if cvsroot is blank, make this blank ' . - 'too).', - type => 't', - default => '', - }, - - { - name => 'bonsai_url', - desc => 'The URL to a ' . - '<a href="http://www.mozilla.org/bonsai.html">Bonsai</a> ' . - 'server containing information about your CVS repository. ' . - 'Patch Viewer will use this information to create links to ' . - 'bonsai\'s blame for each section of a patch (it will append ' . - '"/cvsblame.cgi?..." to this url). Leave this blank if you ' . - 'don\'t understand what this is.', - type => 't', - default => '' - }, - - { - name => 'lxr_url', - desc => 'The URL to an ' . - '<a href="http://sourceforge.net/projects/lxr">LXR</a> server ' . - 'that indexes your CVS repository. Patch Viewer will use this ' . - 'information to create links to LXR for each file in a patch. ' . - 'Leave this blank if you don\'t understand what this is.', - type => 't', - default => '' - }, - - { - name => 'lxr_root', - desc => 'Some LXR installations do not index the CVS repository from ' . - 'the root--' . - '<a href="http://lxr.mozilla.org/mozilla">Mozilla\'s</a>, for ' . - 'example, starts indexing under <code>mozilla/</code>. This ' . - 'means URLs are relative to that extra path under the root. ' . - 'Enter this if you have a similar situation. Leave it blank ' . - 'if you don\'t know what this is.', - type => 't', - default => '', - }, - - { - name => 'noresolveonopenblockers', - desc => 'Don\'t allow bugs to be resolved as fixed if they have unresolved dependencies.', - type => 'b', - default => 0, - }, - -); -1; - |