diff options
Diffstat (limited to '.siegerc')
| -rw-r--r-- | .siegerc | 369 |
1 files changed, 0 insertions, 369 deletions
diff --git a/.siegerc b/.siegerc deleted file mode 100644 index 79dffe6..0000000 --- a/.siegerc +++ /dev/null @@ -1,369 +0,0 @@ -# Updated by Siege 2.66, September-12-2008 -# Copyright 2005 by Jeffrey Fulmer, et al. -# -# Siege configuration file -- edit as necessary -# For more information about configuring and running -# this program, visit: http://www.joedog.org/ - -# -# Variable declarations. You can set variables here -# for use in the directives below. Example: -# PROXY = proxy.joedog.org -# Reference variables inside ${} or $(), example: -# proxy-host = ${PROXY} -# You can also reference ENVIRONMENT variables without -# actually declaring them, example: -logfile = $(HOME)/siege.log - -# -# Signify verbose mode, true turns on verbose output -# ex: verbose = true|false -# -verbose = true - -# -# CSV Verbose format: with this option, you can choose -# to format verbose output in traditional siege format -# or comma separated format. The latter will allow you -# to redirect output to a file for import into a spread -# sheet, i.e., siege > file.csv -# ex: csv = true|false (default false) -# -# csv = true - -# -# Full URL verbose format: By default siege displays -# the URL path and not the full URL. With this option, -# you # can instruct siege to show the complete URL. -# ex: fullurl = true|false (default false) -# -# fullurl = true - -# -# Display id: in verbose mode, display the siege user -# id associated with the HTTP transaction information -# ex: display-id = true|false -# -# display-id = - -# -# Show logfile location. By default, siege displays the -# logfile location at the end of every run when logging -# You can turn this message off with this directive. -# ex: show-logfile = false -# -show-logfile = false - -# -# Default logging status, true turns logging on. -# ex: logging = true|false -# -logging = false - -# -# Logfile, the default siege logfile is $PREFIX/var/siege.log -# This directive allows you to choose an alternative log file. -# Environment variables may be used as shown in the examples: -# ex: logfile = /home/jeff/var/log/siege.log -# logfile = ${HOME}/var/log/siege.log -# logfile = ${LOGFILE} -# -# logfile = - -# -# HTTP protocol. Options HTTP/1.1 and HTTP/1.0. -# Some webservers have broken implementation of the -# 1.1 protocol which skews throughput evaluations. -# If you notice some siege clients hanging for -# extended periods of time, change this to HTTP/1.0 -# ex: protocol = HTTP/1.1 -# protocol = HTTP/1.0 -# -protocol = HTTP/1.1 - -# -# Chunked encoding is required by HTTP/1.1 protocol -# but siege allows you to turn it off as desired. -# -# ex: chunked = true -# -chunked = true - -# -# Connection directive. Options "close" and "keep-alive" -# Starting with release 2.57b3, siege implements persistent -# connections in accordance to RFC 2068 using both chunked -# encoding and content-length directives to determine the -# page size. To run siege with persistent connections set -# the connection directive to keep-alive. (Default close) -# CAUTION: use the keep-alive directive with care. -# DOUBLE CAUTION: this directive does not work well on HPUX -# TRIPLE CAUTION: don't use keep-alives until further notice -# ex: connection = close -# connection = keep-alive -# -connection = close - -# -# Default number of simulated concurrent users -# ex: concurrent = 25 -# -concurrent = 15 - -# -# Default duration of the siege. The right hand argument has -# a modifier which specifies the time units, H=hours, M=minutes, -# and S=seconds. If a modifier is not specified, then minutes -# are assumed. -# ex: time = 50M -# -# time = - -# -# Repetitions. The length of siege may be specified in client -# reps rather then a time duration. Instead of specifying a time -# span, you can tell each siege instance to hit the server X number -# of times. So if you chose 'reps = 20' and you've selected 10 -# concurrent users, then siege will hit the server 200 times. -# ex: reps = 20 -# -# reps = - -# -# Default URLs file, set at configuration time, the default -# file is PREFIX/etc/urls.txt. So if you configured siege -# with --prefix=/usr/local then the urls.txt file is installed -# int /usr/local/etc/urls.txt. Use the "file = " directive to -# configure an alternative URLs file. You may use environment -# variables as shown in the examples below: -# ex: file = /export/home/jdfulmer/MYURLS.txt -# file = $HOME/etc/urls.txt -# file = $URLSFILE -# -# file = - -# -# Default URL, this is a single URL that you want to test. This -# is usually set at the command line with the -u option. When -# used, this option overrides the urls.txt (-f FILE/--file=FILE) -# option. You will HAVE to comment this out for in order to use -# the urls.txt file option. -# ex: url = https://shemp.whoohoo.com/docs/index.jsp -# -# url = - -# -# Default delay value, see the siege(1) man page. -# This value is used for load testing, it is not used -# for benchmarking. -# ex: delay = 3 -# -delay = 1 - -# -# Connection timeout value. Set the value in seconds for -# socket connection timeouts. The default value is 30 seconds. -# ex: timeout = 30 -# -# timeout = - -# -# Session expiration: This directive allows you to delete all -# cookies after you pass through the URLs. This means siege will -# grab a new session with each run through its URLs. The default -# value is false. -# ex: expire-session = true -# -# expire-session = - -# -# Failures: This is the number of total connection failures allowed -# before siege aborts. Connection failures (timeouts, socket failures, -# etc.) are combined with 400 and 500 level errors in the final stats, -# but those errors do not count against the abort total. If you set -# this total to 10, then siege will abort after ten socket timeouts, -# but it will NOT abort after ten 404s. This is designed to prevent -# a run-away mess on an unattended siege. The default value is 1024 -# ex: failures = 50 -# -# failures = - -# -# Internet simulation. If true, siege clients will hit -# the URLs in the urls.txt file randomly, thereby simulating -# internet usage. If false, siege will run through the -# urls.txt file in order from first to last and back again. -# ex: internet = true -# -internet = false - -# -# Default benchmarking value, If true, there is NO delay -# between server requests, siege runs as fast as the web -# server and the network will let it. Set this to false -# for load testing. -# ex: benchmark = true -# -benchmark = false - -# -# Set the siege User-Agent to identify yourself at the -# host, the default is: JoeDog/1.00 [en] (X11; I; Siege #.##) -# But that wreaks of corporate techno speak. Feel free -# to make it more interesting :-) Since Limey is recovering -# from minor surgery as I write this, I'll dedicate the -# example to him... -# ex: user-agent = Limey The Bulldog -# -# user-agent = - -# -# Accept-encoding. This option allows you to specify -# acceptable encodings returned by the server. Use this -# directive to turn on compression. By default we accept -# gzip compression. -# -# ex: accept-encoding = * -# accept-encoding = gzip -# accept-encoding = compress;q=0.5;gzip;q=1 -accept-encoding = gzip - -# -# TURN OFF THAT ANNOYING SPINNER! -# Siege spawns a thread and runs a spinner to entertain you -# as it collects and computes its stats. If you don't like -# this feature, you may turn it off here. -# ex: spinner = false -# -spinner = true - -# -# WWW-Authenticate login. When siege hits a webpage -# that requires basic authentication, it will search its -# logins for authentication which matches the specific realm -# requested by the server. If it finds a match, it will send -# that login information. If it fails to match the realm, it -# will send the default login information. (Default is "all"). -# You may configure siege with several logins as long as no -# two realms match. The format for logins is: -# username:password[:realm] where "realm" is optional. -# If you do not supply a realm, then it will default to "all" -# ex: login = jdfulmer:topsecret:Admin -# login = jeff:supersecret -# -# login = - -# -# WWW-Authenticate username and password. When siege -# hits a webpage that requires authentication, it will -# send this user name and password to the server. Note -# this is NOT form based authentication. You will have -# to construct URLs for that. -# ex: username = jdfulmer -# password = whoohoo -# -# username = -# password = - -# -# ssl-cert -# This optional feature allows you to specify a path to a client -# certificate. It is not neccessary to specify a certificate in -# order to use https. If you don't know why you would want one, -# then you probably don't need this feature. Use openssl to -# generate a certificate and key with the following command: -# $ openssl req -nodes -new -days 365 -newkey rsa:1024 \ -# -keyout key.pem -out cert.pem -# Specify a path to cert.pem as follows: -# ex: ssl-cert = /home/jeff/.certs/cert.pem -# -# ssl-cert = - -# -# ssl-key -# Use this option to specify the key you generated with the command -# above. ex: ssl-key = /home/jeff/.certs/key.pem -# You may actually skip this option and combine both your cert and -# your key in a single file: -# $ cat key.pem > client.pem -# $ cat cert.pem >> client.pem -# Now set the path for ssl-cert: -# ex: ssl-cert = /home/jeff/.certs/client.pem -# (in this scenario, you comment out ssl-key) -# -# ssl-key = - -# -# ssl-timeout -# This option sets a connection timeout for the ssl library -# ex: ssl-timeout = 30 -# -# ssl-timeout = - -# -# ssl-ciphers -# You can use this feature to select a specific ssl cipher -# for HTTPs. To view the ones available with your library run -# the following command: openssl ciphers -# ex: ssl-ciphers = EXP-RC4-MD5 -# -# ssl-ciphers = - -# -# Login URL. This is the first URL to be hit by every siege -# client. This feature was designed to allow you to login to -# a server and establish a session. It will only be hit once -# so if you need to hit this URL more then once, make sure it -# also appears in your urls.txt file. -# -# ex: login-url = http://eos.haha.com/login.jsp POST name=jeff&pass=foo -# -# login-url = - -# -# Proxy protocol. This option allows you to select a proxy -# server stress testing. The proxy will request the URL(s) -# specified by -u"my.url.org" OR from the urls.txt file. -# -# ex: proxy-host = proxy.whoohoo.org -# proxy-port = 8080 -# -# proxy-host = -# proxy-port = - -# -# Proxy-Authenticate. When scout hits a proxy server which -# requires username and password authentication, it will this -# username and password to the server. The format is username, -# password and optional realm each separated by a colon. You -# may enter more than one proxy-login as long as each one has -# a different realm. If you do not enter a realm, then scout -# will send that login information to all proxy challenges. If -# you have more than one proxy-login, then scout will attempt -# to match the login to the realm. -# ex: proxy-login: jeff:secret:corporate -# proxy-login: jeff:whoohoo -# -# proxy-login = - -# -# Redirection support. This option allows to to control -# whether a Location: hint will be followed. Most users -# will want to follow redirection information, but sometimes -# it's desired to just get the Location information. -# -# ex: follow-location = false -# -# follow-location = - -# Zero-length data. siege can be configured to disregard -# results in which zero bytes are read after the headers. -# Alternatively, such results can be counted in the final -# tally of outcomes. -# -# ex: zero-data-ok = false -# -# zero-data-ok = - -# -# end of siegerc |