diff options
Diffstat (limited to 'src/connections/ethernet')
-rw-r--r-- | src/connections/ethernet | 279 |
1 files changed, 0 insertions, 279 deletions
diff --git a/src/connections/ethernet b/src/connections/ethernet deleted file mode 100644 index 487adf8..0000000 --- a/src/connections/ethernet +++ /dev/null @@ -1,279 +0,0 @@ -#! /bin/bash -# Source file for the 'ethernet' connection -# ethernet_up $profile -# ethernet_down $profile -# ethernet_status - -. /usr/lib/network/network - -report_iproute() -{ - report_fail "$*" - bring_interface down "$INTERFACE" - exit 1 -} - -ethernet_up() { - load_profile "$1" - SYSCTL_INTERFACE="${INTERFACE/.//}" - - if ! is_interface "$INTERFACE"; then - report_iproute "Interface $INTERFACE does not exist" - fi - - # Disable IPv6 before bringing the interface up to prevent SLAAC - if [[ "$IP6" == "no" ]]; then - sysctl -q -w "net.ipv6.conf.$SYSCTL_INTERFACE.disable_ipv6=1" - fi - - report_debug ethernet_up bring_interface up "$INTERFACE" - bring_interface up "$INTERFACE" - - if ! checkyesno "${SKIPNOCARRIER:-no}"; then - # Some cards are plain slow to come up. Don't fail immediately. - if ! timeout_wait "${CARRIER_TIMEOUT:-5}" '(( $(< "/sys/class/net/$INTERFACE/carrier") ))'; then - report_iproute "No connection" - fi - fi - - - if checkyesno "${AUTH8021X:-no}"; then - . "$SUBR_DIR/8021x" - [[ -z "$WPA_CONF" ]] && WPA_CONF="/etc/wpa_supplicant.conf" - [[ -z "$WPA_DRIVER" ]] && WPA_DRIVER="wired" - - report_debug ethernet_up start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_DRIVER" "$WPA_OPTS" - if ! start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_DRIVER" "$WPA_OPTS"; then - report_fail "wpa_supplicant did not start, possible configuration error" - return 1 - fi - - if ! wpa_check "$INTERFACE" "$TIMEOUT" "ASSOCIATED"; then - bring_interface down "$INTERFACE" - report_fail "WPA Authentication/Association Failed" - return 1 - fi - fi - - if [[ -z "$IP" && -z "$IP6" ]]; then - report_iproute "At least one of IP or IP6 should be specified" - return 1 - fi - - case "$IP" in - dhcp) - if checkyesno "${DHCLIENT:-no}"; then - rm -r "/run/dhclient-${INTERFACE}.pid" >/dev/null 2>&1 - report_debug ethernet_up dhclient -q -e TIMEOUT="${DHCP_TIMEOUT:-10}" -pf "/run/dhclient-$INTERFACE.pid" "$INTERFACE" - if ! dhclient -q -e TIMEOUT="${DHCP_TIMEOUT:-10}" -pf "/run/dhclient-${INTERFACE}.pid" ${DHCLIENT_OPTIONS} "$INTERFACE"; then - report_fail "DHCP IP lease attempt failed." - stop_80211x - return 1 - fi - else - # Clear remaining pid files. - rm -f "/run/dhcpcd-$INTERFACE".{pid,cache} >/dev/null 2>&1 - # If using own dns, tell dhcpcd to NOT replace resolv.conf - [[ -n "$DNS" ]] && DHCP_OPTIONS="-C resolv.conf $DHCP_OPTIONS" - # Start dhcpcd - report_debug ethernet_up dhcpcd -qL -t "${DHCP_TIMEOUT:-10}" $DHCPCD_INTERNAL_OPTIONS $DHCP_OPTIONS "$INTERFACE" - dhcpcd -qL -t "${DHCP_TIMEOUT:-10}" $DHCPCD_INTERNAL_OPTIONS $DHCP_OPTIONS "$INTERFACE" 2>&1 | report_debug "$(cat)" - if [[ "$PIPESTATUS" -ne 0 ]]; then - report_fail "DHCP IP lease attempt failed." - stop_80211x - return 1 - fi - fi - ;; - static) - if [[ -n "$ADDR" ]]; then - [[ -z $NETMASK ]] && NETMASK=24 - report_debug ethernet_up ip addr add "$ADDR/$NETMASK" brd + dev "$INTERFACE" - if ! ip addr add "$ADDR/$NETMASK" brd + dev "$INTERFACE"; then - report_iproute "Could not configure interface" - fi - fi - if [[ -n "$GATEWAY" ]]; then - report_debug ethernet_up ip route add default via "$GATEWAY" dev "$INTERFACE" - if ! ip route add default via "$GATEWAY" dev "$INTERFACE"; then - report_iproute "Adding gateway $GATEWAY failed" - fi - fi - ;; - ""|no) - ;; - *) - report_iproute "IP must be either 'dhcp', 'static' or 'no'" - ;; - esac - - if [[ -n "$IP" && -n "$ROUTES" ]]; then - for route in "${ROUTES[@]}"; do - report_debug ethernet_up ip route add $route dev "$INTERFACE" - if ! ip route add $route dev "$INTERFACE"; then - report_iproute "Adding route '$route' failed" - fi - done - fi - - # Load ipv6 module if necessary (FS#25530) - case "$IP6" in - dhcp*|stateless|static) - [[ -d "/proc/sys/net/ipv6" ]] || modprobe ipv6 - ;; - no) - [[ -d "/proc/sys/net/ipv6" ]] && sysctl -q -w "net.ipv6.conf.$SYSCTL_INTERFACE.accept_ra=0" - ;; - "") # undefined IP6 does not prevent RA's from being received -> nop - ;; - *) - report_iproute "IP6 must be 'dhcp', 'dhcp-noaddr', 'stateless', 'static' or 'no'" - ;; - esac - - case "$IP6" in - dhcp*) - if ! type dhclient &>/dev/null; then - report_fail "You need to install dhclient to use DHCPv6." - stop_80211x - return 1 - fi - sysctl -q -w "net.ipv6.conf.$SYSCTL_INTERFACE.accept_ra=1" - if [[ "$IP6" == "dhcp-noaddr" ]]; then - DHCLIENT6_OPTIONS="-S ${DHCLIENT6_OPTIONS}" - fi - _DHCLIENT_PIDFILE="/run/dhclient6-${INTERFACE}.pid" - rm -r ${_DHCLIENT_PIDFILE} &>/dev/null - report_debug ethernet_up dhclient -6 -q -e TIMEOUT="${DHCP_TIMEOUT:-10}" -pf ${_DHCLIENT_PIDFILE} "$INTERFACE" - if ! dhclient -6 -q -e TIMEOUT="${DHCP_TIMEOUT:-10}" -pf ${_DHCLIENT_PIDFILE} ${DHCLIENT6_OPTIONS} "$INTERFACE"; then - report_fail "DHCPv6 IP lease attempt failed." - stop_80211x - return 1 - fi - ;; - stateless) - sysctl -q -w "net.ipv6.conf.$SYSCTL_INTERFACE.accept_ra=1" - ;; - static) - sysctl -q -w "net.ipv6.conf.$SYSCTL_INTERFACE.accept_ra=0" - if [[ -n "$ADDR6" ]]; then - for addr in "${ADDR6[@]}"; do - report_debug ethernet_up ip -6 addr add $addr dev "$INTERFACE" - if ! ip -6 addr add $addr dev "$INTERFACE"; then - report_iproute "Could not add address '$addr' to interface" - fi - done - fi - ;; - esac - - if [[ -n "$IP6" ]]; then - # Wait for DAD to finish (FS#28887) - report_debug ethernet_up ip -6 addr show dev "$INTERFACE" tentative - if ! timeout_wait "${DAD_TIMEOUT:-3}" '[[ -z "$(ip -6 addr show dev "$INTERFACE" tentative)" ]]'; then - report_iproute "Duplicate Address Detection is taking too long" - fi - - # Add static IPv6 routes - if [[ -n "$ROUTES6" ]]; then - for route in "${ROUTES6[@]}"; do - report_debug ethernet_up ip -6 route add $route dev "$INTERFACE" - if ! ip -6 route add $route dev "$INTERFACE"; then - report_iproute "Adding route '$route' failed" - fi - done - fi - - # Set a custom gateway after waiting for DAD to finish - if [[ "$IP6" == "static" && -n "$GATEWAY6" ]]; then - report_debug ethernet_up ip -6 route replace default via "$GATEWAY6" dev "$INTERFACE" - if ! ip -6 route replace default via "$GATEWAY6" dev "$INTERFACE"; then - report_iproute "Adding gateway $GATEWAY6 failed" - fi - fi - fi - - if [[ -n "$IPCFG" ]]; then - for line in "${IPCFG[@]}"; do - report_debug ethernet_up ip "$line" - if ! ip $line; then - report_iproute "Could not configure interface ($line)." - fi - done - fi - - # Set hostname - if [[ -n "$HOSTNAME" ]]; then - report_debug ethernet_up hostname "$HOSTNAME" - if ! echo "$HOSTNAME" >/proc/sys/kernel/hostname; then - report_iproute "Cannot set hostname to $HOSTNAME" - fi - fi - - # Generate a new resolv.conf - if [[ -n "$DNS" ]]; then - : >/etc/resolv.conf - [[ -n "$DOMAIN" ]] && echo "domain $DOMAIN" >>/etc/resolv.conf - [[ -n "$SEARCH" ]] && echo "search $SEARCH" >>/etc/resolv.conf - for dns in "${DNS[@]}"; do - echo "nameserver $dns" >>/etc/resolv.conf - done - for dnsoption in "${DNS_OPTIONS[@]}"; do - echo "options $dnsoption" >>/etc/resolv.conf - done - fi - - return 0 -} - -ethernet_down() { - load_profile "$1" - - if [[ "$IP" == "dhcp" ]]; then - if checkyesno "${DHCLIENT:-no}"; then - if [[ -f "/run/dhclient-$INTERFACE.pid" ]]; then - report_debug ethernet_down dhclient -q -x "$INTERFACE" -pf "/run/dhclient-$INTERFACE.pid" - dhclient -q -x "$INTERFACE" -pf "/run/dhclient-$INTERFACE.pid" &>/dev/null - #dhclient -q -r "$INTERFACE" &>/dev/null - fi - else - if [[ -f "/run/dhcpcd-$INTERFACE.pid" ]]; then - report_debug ethernet_down dhcpcd -qk "$INTERFACE" - dhcpcd -qk "$INTERFACE" &>/dev/null - fi - fi - fi - if [[ "$IP6" == dhcp* ]]; then - if [[ -f "/run/dhclient6-$INTERFACE.pid" ]]; then - report_debug ethernet_down dhclient -6 -q -x "$INTERFACE" -pf "/run/dhclient6-$INTERFACE.pid" - dhclient -6 -q -x "$INTERFACE" -pf "/run/dhclient6-$INTERFACE.pid" &>/dev/null - report_debug ethernet_down /bin/kill $(< /run/dhclient6-$INTERFACE.pid) - /bin/kill $(< /run/dhclient6-$INTERFACE.pid) &>/dev/null - fi - fi - - stop_80211x - - if [[ "$CONNECTION" == "wireless" ]]; then - report_debug ethernet_down bring_interface flush "$INTERFACE" - bring_interface flush "$INTERFACE" - else - report_debug ethernet_down bring_interface down "$INTERFACE" - bring_interface down "$INTERFACE" - fi - return 0 -} - -# Stop wpa_supplicant if neccessary -stop_80211x() { - if checkyesno "${AUTH8021X:-no}"; then - . "$SUBR_DIR/8021x" - [[ -z "$WPA_CONF" ]] && WPA_CONF="/etc/wpa_supplicant.conf" - report_debug ethernet_down stop_wpa "$INTERFACE" - stop_wpa "$INTERFACE" - fi -} - -ethernet_$1 "$2" -exit $? -# vim: set ts=4 et sw=4: |