summaryrefslogtreecommitdiffstats
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/8021x36
-rw-r--r--src/connections/ethernet211
-rw-r--r--src/connections/ethernet-iproute214
-rw-r--r--src/connections/ppp53
-rw-r--r--src/connections/wireless368
-rw-r--r--src/globals118
-rw-r--r--src/net-profiles63
-rw-r--r--src/net-rename10
-rw-r--r--src/netcfg56
-rw-r--r--src/netcfg-menu59
-rw-r--r--src/network460
-rw-r--r--src/wireless_utils141
12 files changed, 405 insertions, 1384 deletions
diff --git a/src/8021x b/src/8021x
index 7daecce..75030e9 100644
--- a/src/8021x
+++ b/src/8021x
@@ -1,53 +1,45 @@
-##################################
-##
-# /usr/lib/network/8021x
-##
-##################################
-
# Uses wpa_supplicant to check for association to a network
# wpa_check interface [timeout]
wpa_check()
{
- local INTERFACE="$1" TIMEOUT="${2:-15}" timeout=0
+ local timeout=0 INTERFACE=$1 TIMEOUT=${2:-15}
- while [[ "$timeout" -lt "$TIMEOUT" ]]; do
+ while [[ $timeout -lt $TIMEOUT ]]; do
( # Sometimes wpa_supplicant isn't ready so silence errors for 2s only to avoid hiding real errors
- if [[ "$timeout" -lt 2 ]]; then
- eval $(wpa_cli -i "$INTERFACE" status 2> /dev/null | fgrep "wpa_state=")
+ if [[ $timeout -lt 2 ]]; then
+ eval `wpa_cli status 2> /dev/null|grep wpa_state`
else
- eval $(wpa_cli -i "$INTERFACE" status | fgrep "wpa_state=")
+ eval `wpa_cli status|grep wpa_state`
fi
- [[ "$wpa_state" = COMPLETED ]]
+ [[ "$wpa_state" = "COMPLETED" ]]
) && return 0
sleep 1
let timeout++
done
wpa_cli terminate >/dev/null 2>&1
- report_fail "Couldn't associate/authenticate with wireless network."
+ err_append "Authentication/association failed"
return 1
}
start_wpa()
{
- local INTERFACE="$1" WPA_CONF="$2" WPA_OPTS="$3"
+ INTERFACE="$1"; WPA_CONF="$2"; WPA_OPTS="$3"
- wpa_supplicant -B -P "/var/run/wpa_supplicant_$INTERFACE.pid" -i "$INTERFACE" -c "$WPA_CONF" $WPA_OPTS
+ wpa_supplicant -B -P/var/run/wpa_supplicant_${INTERFACE}.pid -i"${INTERFACE}" -c "$WPA_CONF" $WPA_OPTS
sleep 1
- if [[ ! -f "/var/run/wpa_supplicant_$INTERFACE.pid" ]]; then
- report_fail "wpa_supplicant did not start, possible configuration error"
+ if [[ ! -f "/var/run/wpa_supplicant_${INTERFACE}.pid" ]]; then
+ err_append "wpa_supplicant did not start, possible configuration error"
return 1
fi
}
stop_wpa()
{
- wpa_cli -i "$1" terminate &> /dev/null
- sleep 1 # JP: need this else the file tends to disappear after [[ -f ... ]] but before cat...
- # see <http://bbs.archlinux.org/viewtopic.php?pid=515667#p515667>
- if [[ -f "/var/run/wpa_supplicant_$1.pid" ]]; then
- kill $(cat "/var/run/wpa_supplicant_$1.pid") &>/dev/null &
+ wpa_cli terminate &> /dev/null
+ if [[ -f /var/run/wpa_supplicant_$1.pid ]]; then
+ kill $(cat /var/run/wpa_supplicant_$1.pid) &>/dev/null &
fi
}
diff --git a/src/connections/ethernet b/src/connections/ethernet
index 933dbd6..e24e9f5 100644
--- a/src/connections/ethernet
+++ b/src/connections/ethernet
@@ -1,114 +1,86 @@
#! /bin/bash
-
-##################################
-##
-# /usr/lib/network/connections/ethernet
-##
-##################################
-
-. /etc/rc.conf
-. /etc/rc.d/functions
. /usr/lib/network/network
ethernet_up() {
- load_profile "$1"
+ load_profile $1
- if [[ ! -e "/sys/class/net/$INTERFACE" ]]; then
- if ! echo "$INTERFACE" | fgrep -q ":"; then
- report_fail "Interface $INTERFACE does not exist."
+ if [[ ! -e /sys/class/net/"$INTERFACE" ]]; then
+ if ! echo "$INTERFACE"|grep ":"; then
+ err_append "interface $INTERFACE does not exist"
return 1
fi
fi
- report_debug ethernet_up ifup
- ethernet_control "$INTERFACE" up
- sleep 3
+ ip link set $INTERFACE up
+ sleep 1
- # don't think it's possible to detect carrier using ifconfig alone (at least, not without ifdown/ifupping the interface)
- # if ip link show dev "$INTERFACE" | fgrep -q "NO-CARRIER"; then...
- # if ! ethernet_query "$INTERFACE" address; then...
- if [[ $(cat /sys/class/net/$INTERFACE/carrier 2>/dev/null) -ne 1 ]]; then # gives err if iface inactive (i.e. ifdown)
- # 0 if up but not connected to network, 1 if connected
- report_fail "No connection."
+ if ip link show $INTERFACE|grep -q "NO-CARRIER"; then
+ err_append "No connection"
return 1
fi
if checkyesno "${AUTH8021X:-no}"; then
- . "$SUBR_DIR/8021x"
+ . "${SUBR_DIR}"/8021x
[[ -z "$WPA_CONF" ]] && WPA_CONF="/etc/wpa_supplicant.conf"
[[ -z "$WPA_OPTS" ]] && WPA_OPTS="-Dwired"
- report_debug ethernet_up start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_OPTS"
start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_OPTS"
if ! wpa_check "$INTERFACE"; then
- ethernet_control "$INTERFACE" forcedown # JP: forcedown ignores the nodown quirk, matching
- # what was already here in the code...do we in fact want to ignore
- # the nodown quirk here?
+ ifconfig "$INTERFACE" down
return 1
fi
fi
- case "$IP" in
+ case $IP in
dhcp)
if checkyesno "${DHCLIENT:-no}"; then
- rm -r "/var/run/dhclient-$INTERFACE.pid" >/dev/null 2>&1
- report_debug ethernet_up dhclient -q -e TIMEOUT="${DHCP_TIMEOUT:-10}" -pf "/var/run/dhclient-$INTERFACE.pid" "$INTERFACE"
- if ! dhclient -q -e TIMEOUT="${DHCP_TIMEOUT:-10}" -pf "/var/run/dhclient-$INTERFACE.pid" "$INTERFACE"; then
- report_fail "Couldn't get DHCP IP lease."
+ rm -r /var/run/dhclient-${INTERFACE}.pid >/dev/null 2>&1
+ if ! dhclient -q -e TIMEOUT="${DHCP_TIMEOUT:-10}" -pf /var/run/dhclient-${INTERFACE}.pid $INTERFACE; then
+ err_append "DHCP IP lease attempt failed."
return 1
fi
else
# Clear remaining pid files.
- rm -f "/var/run/dhcpcd-$INTERFACE".{pid,cache} >/dev/null 2>&1
+ rm -f /var/run/dhcpcd-${INTERFACE}.{pid,cache} >/dev/null 2>&1
# If using own dns, tell dhcpcd to NOT replace resolv.conf
- [[ -n "$DNS1" || -n "$DNS" ]] && DHCP_OPTIONS="-C resolv.conf $DHCP_OPTIONS"
-
- #if ! dhcpcd -qL -t "${DHCP_TIMEOUT:-10}" $DHCP_OPTIONS "$INTERFACE" >/dev/null 2>&1; then
- report_debug ethernet_up dhcpcd -qL -t "${DHCP_TIMEOUT:-10}" $DHCP_OPTIONS "$INTERFACE"
- dhcpcd -qL -t "${DHCP_TIMEOUT:-10}" $DHCP_OPTIONS "$INTERFACE" 2>&1 | report_debug $(cat)
- if [[ "$PIPESTATUS" -ne 0 ]]; then
- report_fail "Couldn't get DHCP IP lease."
+ [[ -n "$DNS1" ]] && DHCP_OPTIONS="-C resolv.conf $DHCP_OPTIONS"
+ # Start dhcpcd
+ if ! dhcpcd -qL -t "${DHCP_TIMEOUT:-10}" $DHCP_OPTIONS "$INTERFACE"; then
+ err_append "DHCP IP lease attempt failed."
return 1
fi
fi
- if [[ -n "$IFOPTS" ]]; then
- report_debug ethernet_up ifup $IFOPTS
- ifconfig "$INTERFACE" $IFOPTS
- fi
+ [[ -n "$IFOPTS" ]] && ifconfig "$INTERFACE" $IFOPTS
;;
static)
- report_debug ethernet_up ifup $IFOPTS
if ! ifconfig "$INTERFACE" $IFOPTS up; then
- report_fail "Couldn't configure $INTERFACE interface."
+ err_append "Bringing interface up failed."
return 1
fi
# bring up the default route (gateway)
if [[ -n "$GATEWAY" ]]; then
- report_debug ethernet_up route add default gw "$GATEWAY"
- if ! route add default gw "$GATEWAY"; then
- ethernet_control "$INTERFACE" down # JP: don't we want to take the interface down if we failed (as ethernet-iproute does?)
- report_fail "Couldn't add gateway $GATEWAY."
+ if ! route add default gw $GATEWAY; then
+ err_append "Adding gateway failed."
return 1
fi
fi
;;
*)
- report_err "Profile error: must be either IP=dhcp or IP=static."
+ err_append "IP=\"\" must be either 'dhcp' or 'static'."
return 1
;;
esac
# set the hostname
if [[ -n "$HOSTNAME" ]]; then
- report_debug ethernet_up hostname "$HOSTNAME"
if ! hostname "$HOSTNAME"; then
- report_fail "Couldn't set hostname."
+ err_append "Setting hostname failed."
return 1
fi
fi
# Generate a new resolv.conf
- if [[ -n "$DNS1" || -n "$DNS" ]]; then
+ if [[ -n "$DNS1" ]] || [[ -n "$DNS" ]]; then
: >/etc/resolv.conf
[[ -n "$DOMAIN" ]] && echo "domain $DOMAIN" >>/etc/resolv.conf
@@ -122,141 +94,36 @@ ethernet_up() {
done
fi
fi
-
- # successfully running a new profile; erase any suspended profiles on this interface
- local iface="$INTERFACE"
- find "$STATE_DIR/suspend/" -maxdepth 1 -type f -printf '%f\n' \
- | while read prof; do
- # the pipe to "while read" will create a subshell, so sourced variables will already be in a sandbox
- # we just need to clear INTERFACE which is all we care about
- unset INTERFACE
- . "$STATE_DIR/suspend/$prof"
- if [[ "$iface" == "$INTERFACE" ]]; then
- rm "$STATE_DIR/suspend/$prof"
- fi
- done
-
return 0
}
ethernet_down() {
- load_profile "$1"
- case "$IP" in
+ load_profile $1
+ case $IP in
dhcp)
if checkyesno "${DHCLIENT:-no}"; then
- if [[ -f "/var/run/dhclient-$INTERFACE.pid" ]]; then
- report_debug ethernet_down kill dhclient
- kill $(cat "/var/run/dhclient-$INTERFACE.pid")
+ if [[ -f /var/run/dhclient-${INTERFACE}.pid ]]; then
+ kill `cat /var/run/dhclient-${INTERFACE}.pid`
fi
else
- if [[ -f "/var/run/dhcpcd-$INTERFACE.pid" ]]; then
- report_debug ethernet_down dhcpcd -qx "$INTERFACE"
- dhcpcd -qx "$INTERFACE" >/dev/null 2>&1
+ if [[ -f /var/run/dhcpcd-${INTERFACE}.pid ]]; then
+ dhcpcd -qx "$INTERFACE"
fi
fi
;;
static)
- if [[ -n "$GATEWAY" ]]; then
- report_debug ethernet_down route del default gw "$GATEWAY"
- route del default gw "$GATEWAY"
- fi
+ [[ -n "$GATEWAY" ]] && route del default gw $GATEWAY
;;
esac
-
- report_debug ethernet_down ifdown
- ethernet_control "$INTERFACE" down
-}
-
-# CONNECTION_query $INTERFACE [ profile | enabled (i.e. not rfkill-ed) | active (i.e. ifup'd) | associated | address ]
-ethernet_query() {
- local INTERFACE="$1" REQUEST="$2"
- # report_debug ethernet_query "$@"
- case "$REQUEST" in
-
- # JP: this duplicates code in ethernet-iproute, but doing so was necessary to refactor these functions into the CONNECTION scripts
- profile)
- # return code = 1 if iface is available to be used
- # return code = 0 if unavailable (disabled, or in use by another profile or by external config)
- # echo "" | "disabled" | "external" | PROFILE_NAME
- if [[ ! -f "$STATE_DIR/interfaces/$INTERFACE" ]]; then
- # interface is up but has no registered profile
- if ethernet_query "$INTERFACE" address; then
- set_iface up "$INTERFACE" external
- echo "external"
- return 0
- fi
- # no ip address, count as inactive
- # should we ifconfig iface down? no, may be up for a reason
- return 1
-
- else # interface is up and thinks it's running a profile
- . "$STATE_DIR/interfaces/$INTERFACE" # these files should only contain a PROFILE=... statement
- case "$PROFILE" in
- external)
- echo "external"
- return 0
- ;;
- disabled) # shouldn't happen for non-wireless interfaces, but leaving this here in case...
- # iface should be down if it's disabled
- ethernet_control "$INTERFACE" down
- echo "disabled"
- return 0
- ;;
- *)
- ( # use subshell to prevent overwriting currently loaded profile
- . "$STATE_DIR/profiles/$PROFILE"
- if ! ethernet_query "$INTERFACE" address; then
- report_warn "INTERFACE $INTERFACE is inactive; no longer being controlled by $PROFILE"
- set_profile down "$PROFILE"
- exit 1
- else
- echo "$PROFILE" # associated with loaded profile
- exit 0
- fi
- )
- # return $?
- ;;
- esac
- fi
- ;;
-
- active)
- ifconfig "$INTERFACE" | fgrep -qw UP
- # cat /sys/class/net/wlan0/carrier >/dev/null # gives err if iface inactive, 0 if up but not connected to network, 1 if connected
- ;;
-
- address)
- ifconfig "$INTERFACE" | fgrep -q addr:
- ;;
-
- *) return 1 ;;
- esac
-}
-
-# CONNECTION_control $INTERFACE [ up | down | forcedown | enable | disable ]
-ethernet_control() {
- local INTERFACE="$1" ACTION="$2"
- #report_debug ethernet_control "$@"
- case "$ACTION" in
- up) ifconfig "$INTERFACE" up 2>/dev/null
- ethernet_query "$INTERFACE" active
- ;;
- down|forcedown)
- ifconfig "$1" 0.0.0.0
- if [[ "$2" = forcedown ]] || ! quirk nodown; then
- ifconfig "$INTERFACE" down
- fi
- ;;
- *) return 1
+ ifconfig $INTERFACE 0.0.0.0
+
+ case "$CONNECTION" in # Keep interface up for wireless
+ ethernet|ethernet-old)
+ quirk "nodown" || ifconfig $INTERFACE down
;;
esac
}
-ethernet_verify() {
- local INTERFACE="$1"
- # do nothing
-}
-
-ethernet_$1 "$2" "$3"
+ethernet_$1 $2
exit $?
# vim: set ts=4 et sw=4:
diff --git a/src/connections/ethernet-iproute b/src/connections/ethernet-iproute
index 8ecabe8..1a4a6e4 100644
--- a/src/connections/ethernet-iproute
+++ b/src/connections/ethernet-iproute
@@ -1,102 +1,85 @@
#! /bin/bash
-
-##################################
-##
-# /usr/lib/network/connections/ethernet-iproute
-##
-##################################
-
-. /etc/rc.conf
-. /etc/rc.d/functions
. /usr/lib/network/network
-report_iproute() {
- report_"$@"
- ethernet_control "$INTERFACE" down
+error()
+{
+ err_append "$*"
+ ip addr flush $INTERFACE &>/dev/null
+ quirk "nodown" || ip link set $INTERFACE down &>/dev/null
exit 1
}
ethernet_up() {
- load_profile "$1"
+ load_profile $1
- if [[ ! -e "/sys/class/net/$INTERFACE" ]]; then
- if ! echo "$INTERFACE" | fgrep -q ":"; then
- report_iproute fail "Interface $INTERFACE does not exist."
+ if [[ ! -e /sys/class/net/$INTERFACE ]]; then
+ if ! echo "$INTERFACE"|grep ":"; then
+ error "Interface $INTERFACE does not exist"
fi
fi
- report_debug ethernet_iproute_up ifup
- ethernet_control "$INTERFACE" up
- sleep 3
+ ip link set $INTERFACE up
+ sleep 1
- # if ! ethernet_query "$INTERFACE" address; then...
- if ip link show dev "$INTERFACE" | fgrep -q "NO-CARRIER"; then # JP: shouldn''t we include the "dev"?
- report_iproute fail "No connection."
+ if ip link show $INTERFACE|grep -q "NO-CARRIER"; then
+ err_append "No connection"
+ return 1
fi
-
- if checkyesno "${AUTH8021X:-no}"; then
- . "$SUBR_DIR/8021x"
+
+ if checkyesno ${AUTH8021X:-no}; then
+ . ${SUBR_DIR}/8021x
[[ -z "$WPA_CONF" ]] && WPA_CONF="/etc/wpa_supplicant.conf"
[[ -z "$WPA_OPTS" ]] && WPA_OPTS="-Dwired"
- report_debug ethernet_iproute_up start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_OPTS"
+
start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_OPTS"
if ! wpa_check "$INTERFACE"; then
- ethernet_control "$INTERFACE" forcedown # JP: forcedown ignores the nodown quirk, matching
- # what was already here in the code...do we in fact want to ignore
- # the nodown quirk here?
+ ip link set $INTERFACE down
return 1
fi
fi
- case "$IP" in
+ case $IP in
dhcp)
# Clear remaining pid files.
- rm -f "/var/run/dhcpcd-$INTERFACE".{pid,cache} >/dev/null 2>&1
+ rm -f /var/run/dhcpcd-${INTERFACE}.{pid,cache} >/dev/null 2>&1
+
# If using own dns, tell dhcpcd to NOT replace resolv.conf
[[ -n "$DNS" ]] && DHCP_OPTIONS="-C resolv.conf $DHCP_OPTIONS"
-
- #if ! dhcpcd -qL -t "${DHCP_TIMEOUT:-10}" $DHCP_OPTIONS "$INTERFACE" >/dev/null 2>&1; then
- report_debug ethernet_iproute_up dhcpcd -qL -t "${DHCP_TIMEOUT:-10}" $DHCP_OPTIONS "$INTERFACE"
- dhcpcd -qL -t "${DHCP_TIMEOUT:-10}" $DHCP_OPTIONS "$INTERFACE" 2>&1 | report_iproute debug $(cat)
- if [[ "$PIPESTATUS" -ne 0 ]]; then
- report_iproute fail "Couldn't get DHCP IP lease."
+
+ if ! dhcpcd -qL -t ${DHCP_TIMEOUT:-10} $DHCP_OPTIONS $INTERFACE; then
+ error "DHCP IP lease attempt failed"
fi
;;
static)
if [[ -n "$ADDR" ]]; then
- report_debug ethernet_iproute_up ip addr add "$ADDR/24" brd + dev "$INTERFACE"
- if ! ip addr add "$ADDR/24" brd + dev "$INTERFACE"; then
- report_iproute fail "Couldn't configure $INTERFACE interface."
+ if ! ip addr add ${ADDR}/24 brd + dev $INTERFACE; then
+ error "Could not configure interface"
fi
fi
if [[ -n "$GATEWAY" ]]; then
- report_debug ethernet_iproute_up ip route add default via "$GATEWAY"
- if ! ip route add default via "$GATEWAY"; then
-
- report_iproute fail "Couldn't add gateway $GATEWAY."
+ if ! ip route add default via $GATEWAY; then
+ error "Adding gateway failed"
fi
fi
;;
*)
- report_iproute err "Profile error: must be either IP=dhcp or IP=static."
+ error "Profile error: IP must be either 'dhcp' or 'static'"
;;
esac
if [[ -n "$IPCFG" ]]; then
for line in "${IPCFG[@]}"; do
- report_debug ethernet_iproute_up ip "$line"
- if ! ip "$line"; then
- report_iproute fail "Couldn't configure $INTERFACE interface ($line)."
+ if ! ip $line; then
+ error "Could not configure interface"
fi
done
fi
- # set the hostname
+ # Set hostname
if [[ -n "$HOSTNAME" ]]; then
- report_debug ethernet_iproute_up hostname "$HOSTNAME"
- if ! hostname "$HOSTNAME"; then
- report_iproute fail "Couldn't set hostname."
+ if ! hostname $HOSTNAME; then
+ error "Cannot set hostname"
fi
fi
@@ -106,132 +89,29 @@ ethernet_up() {
[[ -n "$DOMAIN" ]] && echo "domain $DOMAIN" >>/etc/resolv.conf
[[ -n "$SEARCH" ]] && echo "search $SEARCH" >>/etc/resolv.conf
- for dns in "${DNS[@]}"; do
- echo "nameserver $dns" >>/etc/resolv.conf
- done
- fi
-
- # successfully running a new profile; erase any suspended profiles on this interface
- local iface="$INTERFACE"
- find "$STATE_DIR/suspend/" -maxdepth 1 -type f -printf '%f\n' \
- | while read prof; do
- # the pipe to "while read" will create a subshell, so sourced variables will already be in a sandbox
- # we just need to clear INTERFACE which is all we care about
- unset INTERFACE
- . "$STATE_DIR/suspend/$prof"
- if [[ "$iface" == "$INTERFACE" ]]; then
- rm "$STATE_DIR/suspend/$prof"
+ if [[ -n "$DNS" ]]; then
+ for dns in ${DNS[@]}; do
+ echo "nameserver $dns" >>/etc/resolv.conf
+ done
fi
- done
-
+ fi
return 0
}
ethernet_down() {
- load_profile "$1"
+ load_profile $1
- if [[ "$IP" == dhcp ]]; then
- if [[ -f "/var/run/dhcpcd-$INTERFACE.pid" ]]; then
- report_debug ethernet_iproute_down dhcpcd -qx "$INTERFACE"
- dhcpcd -qx "$INTERFACE" >/dev/null 2>&1
+ if [[ "$IP" == "dhcp" ]]; then
+ if [[ -f /var/run/dhcpcd-${INTERFACE}.pid ]]; then
+ dhcpcd -qx $INTERFACE
fi
fi
- report_debug ethernet_iproute_down if_down
- ethernet_control "$INTERFACE" down
-}
-
-# CONNECTION_query $INTERFACE [ profile | enabled (i.e. not rfkill-ed) | active (i.e. ifup'd) | associated | address ]
-ethernet_query() {
- local INTERFACE="$1" REQUEST="$2"
- # report_debug ethernet_iproute_query "$@"
- case "$REQUEST" in
-
- profile)
- # return code = 1 if iface is available to be used
- # return code = 0 if unavailable (disabled, or in use by another profile or by external config)
- # echo "" | "disabled" | "external" | PROFILE_NAME
- if [[ ! -f "$STATE_DIR/interfaces/$INTERFACE" ]]; then
- # interface is up but has no registered profile
- if ethernet_query "$INTERFACE" address; then
- set_iface up "$INTERFACE" external
- echo "external"
- return 0
- fi
- # no ip address, count as inactive
- # should we ifconfig iface down? no, may be up for a reason
- return 1
-
- else # interface is up and thinks it's running a profile
- . "$STATE_DIR/interfaces/$INTERFACE" # these files should only contain a PROFILE=... statement
- case "$PROFILE" in
- external)
- echo "external"
- return 0
- ;;
- disabled) # shouldn't happen for non-wireless interfaces, but leaving this here in case...
- # iface should be down if it's disabled
- ethernet_control "$INTERFACE" down
- echo "disabled"
- return 0
- ;;
- *)
- ( # use subshell to prevent overwriting currently loaded profile
- . "$STATE_DIR/profiles/$PROFILE"
- if ! ethernet_query "$INTERFACE" address; then
- report_warn "INTERFACE $INTERFACE is inactive; no longer being controlled by $PROFILE"
- set_profile down "$PROFILE"
- exit 1
- else
- echo "$PROFILE" # associated with loaded profile
- exit 0
- fi
- )
- # return $?
- ;;
- esac
- fi
- ;;
-
- active)
- ip -o link show dev "$INTERFACE" | egrep -qw '^[^>]*,UP' # man ip is inconsistent about whether to use "dev"
- # cat /sys/class/net/wlan0/carrier >/dev/null # gives err if iface inactive, 0 if up but not connected to network, 1 if connected
- ;;
-
- address)
- test -n "$(ip -o addr show dev "$INTERFACE" | sed -n '2p')"
- # ip link show dev "$INTERFACE" | fgrep -q "NO-CARRIER"
- ;;
-
- *) return 1 ;;
- esac
-}
-
-# CONNECTION_control $INTERFACE [ up | down | forcedown | enable | disable ]
-ethernet_control() {
- local INTERFACE="$1" ACTION="$2"
- #report_debug ethernet_iproute_control "$@"
- case "$ACTION" in
- up)
- ip link set dev "$INTERFACE" up 2>/dev/null # man ip is inconsistent about whether to use "dev"
- ethernet_query "$INTERFACE" active
- ;;
- down|forcedown)
- ip addr flush dev "$INTERFACE" &>/dev/null
- if [[ "$2" = forcedown ]] || ! quirk nodown; then
- ip link set dev "$INTERFACE" down &>/dev/null # man ip is inconsistent about whether to use "dev"
- fi
- ;;
- *) return 1
- ;;
- esac
-}
+ ip addr flush $INTERFACE
+ quirk "nodown" || ip link set $INTERFACE down
-ethernet_verify() {
- local INTERFACE="$1"
- # do nothing
}
-ethernet_$1 "$2" "$3"
+ethernet_$1 $2
exit $?
# vim: set ts=4 et sw=4:
diff --git a/src/connections/ppp b/src/connections/ppp
index ce3c8ab..9432323 100644
--- a/src/connections/ppp
+++ b/src/connections/ppp
@@ -1,58 +1,25 @@
#! /bin/bash
-##################################
-##
-# /usr/lib/network/connections/ppp
-##
-##################################
-
-. /etc/rc.conf
-. /etc/rc.d/functions
. /usr/lib/network/network
ppp_up() {
- load_profile "$1"
- [[ -z "$PEER" ]] && PEER=provider
+ load_profile $1
+ [[ -z "$PEER" ]] && PEER="provider"
[[ -z "$PPP_TIMEOUT" ]] && PPP_TIMEOUT=30
- if ! /usr/sbin/pppd call "$PEER" updetach child-timeout "$PPP_TIMEOUT" linkname "$PEER"; then
- report_fail "Couldn't make pppd connection."
- return 1
- fi
+ /usr/sbin/pppd call $PEER updetach child-timeout $PPP_TIMEOUT linkname $PEER
- # wireless and wireless-dbus connections run this block when they call "ethernet up"; but ppp needs to do it itself
- # successfully running a new profile; erase any suspended profiles on this interface
- local interface="$INTERFACE"
- find "$STATE_DIR/suspend/" -maxdepth 1 -type f -printf '%f\n' \
- | while read prof; do
- # the pipe to "while read" will create a subshell, so sourced variables will already be in a sandbox
- # we just need to clear INTERFACE which is all we care about
- unset INTERFACE
- . "$STATE_DIR/suspend/$prof"
- if [[ "$interface" == "$INTERFACE" ]]; then
- rm "$STATE_DIR/suspend/$prof"
- fi
- done
+ if [[ $? -ne 0 ]]; then
+ err_append "pppd connection failed"
+ exit 1
+ fi
}
ppp_down() {
- load_profile "$1"
- kill $(head -1 "/var/run/ppp-$(basename "$PEER").pid")
-}
-
-ppp_query() {
- "$CONN_DIR/ethernet" query "$@"
-}
-
-ppp_control() {
- "$CONN_DIR/wireless" control "$@"
-}
-
-ppp_verify() {
- local INTERFACE="$1"
- # do nothing
+ load_profile $1
+ kill $(head -1 /var/run/ppp-$(basename $PEER).pid)
}
-ppp_$1 "$2"
+ppp_$1 $2
exit $?
# vim: set ts=4 et sw=4:
diff --git a/src/connections/wireless b/src/connections/wireless
index f316cb7..8b43ed1 100644
--- a/src/connections/wireless
+++ b/src/connections/wireless
@@ -1,378 +1,124 @@
#! /bin/bash
-
-##################################
-##
-# /usr/lib/network/connections/wireless
-##
-##################################
-
-. /etc/rc.conf
-. /etc/rc.d/functions
. /usr/lib/network/network
wireless_up() {
- load_profile "$1"
- [[ -n "$2" ]] && ESSID="$2" # JP: use the literal ESSID (though currently we only interpret wireless-dbus ESSIDs as regexps)
-
- . "$SUBR_DIR/8021x"
- . "$SUBR_DIR/wireless_utils"
+ load_profile $1
+ . ${SUBR_DIR}/8021x
+ . ${SUBR_DIR}/wireless
# Check if interface exists
- if [[ ! -e "/sys/class/net/$INTERFACE" ]]; then
- if ! echo "$INTERFACE" | fgrep -q ":"; then
- report_fail "Interface $INTERFACE does not exist."
+ if [[ ! -e /sys/class/net/"$INTERFACE" ]]; then
+ if ! echo "$INTERFACE"|grep ":"; then
+ err_append "interface $INTERFACE does not exist"
return 1
fi
fi
# Kill any lingering wpa_supplicants.
- report_debug wireless_up stop_wpa "$INTERFACE"
- stop_wpa "$INTERFACE"
+ stop_wpa $INTERFACE
# Most drivers (mac80211) need mode set before device is brought up
# Drivers generally default to managed, but set this to be sure.
- if [[ $(iwgetid -sm "$INTERFACE") -ne Managed ]]; then
- report_debug wireless_up iwconfig "$INTERFACE" mode managed
- iwconfig "$INTERFACE" mode managed
- fi
-
- report_debug wireless_up ifup
- wireless_control "$INTERFACE" up || return 1
-
- quirk prescan && iwlist "$INTERFACE" scan &> /dev/null # bcm43xx
-
+ if [[ "$(iwgetid -sm $INTERFACE)" -ne "Managed" ]]; then
+ iwconfig $INTERFACE mode managed
+ fi
- if quirk preessid; then # ipw3945
- if [[ -n "$AP" ]]; then # JP: enable use of AP
- # JP: Since I don't undertand why the else block below is an eval, I'm not sure
- # if this command also needs to be eval'd
- iwconfig "$INTERFACE" mode managed ap "$AP"
- else
- # JP: I don't understand why this needs to be an eval. What's wrong with just:
- # iwconfig "$INTERFACE" mode managed essid "$ESSID"
- eval "iwconfig \"$INTERFACE\" mode managed essid \"$ESSID\""
- fi
+ ifconfig $INTERFACE up
- fi
+ quirk "prescan" && iwlist $INTERFACE scan &> /dev/null # bcm43xx
+ quirk "preessid" && eval "iwconfig $INTERFACE mode managed essid \"$ESSID\"" # ipw3945
- if checkyesno "${SCAN:-no}"; then
- report_debug wireless_up scanning
- local OLDESSID="$ESSID"
- if [[ -n "$AP" ]]; then
- ESSID=$(find_ap "$INTERFACE" "$AP")
- else
- ESSID=$(find_essid "$INTERFACE" "$ESSID" "$CONNECTION") # JP: we could have left $3 null for default of treating ESSID as literal
- # but instead we explicitly pass $CONNECTION
- fi
- if [[ $? -gt 0 ]]; then
- report_fail "Wireless network \"$OLDESSID\" not present."
+ if checkyesno ${SCAN:-no}; then
+ if ! find_essid $INTERFACE "$ESSID"; then
+ err_append "Network not present."
return 1
fi
fi
# Manually set iwconfig options
- if [[ -n "$IWCONFIG" ]]; then
- report_debug wireless_up iwconfig "$INTERFACE" $IWCONFIG
- iwconfig "$INTERFACE" $IWCONFIG
- fi
+ [[ "$IWCONFIG" ]] && iwconfig $INTERFACE $IWCONFIG
# Set to 'none' if not set
- [[ -z "$SECURITY" ]] && SECURITY=none
+ [[ -z "$SECURITY" ]] && SECURITY="none"
- case "$SECURITY" in
+ case $SECURITY in
wep|none)
# 'none' uses iwconfig like wep. Use sane default if WEP_OPTS=""
- if [[ -z "$WEP_OPTS" ]]; then
- if [[ "$SECURITY" = wep ]]; then
- if [[ -n "$AP" ]]; then
- WEP_OPTS="ap \"$AP\" key $KEY" # JP: formerly I had "...key open $KEY"; is it correct to omit the 'open'?
- else
- WEP_OPTS="essid \"$ESSID\" key $KEY" # JP: formerly I had "...key open $KEY"; is it correct to omit the 'open'?
- fi
- else # SECURITY=none
- if [[ -n "$AP" ]]; then
- WEP_OPTS="ap \"$AP\""
- else
- WEP_OPTS="essid \"$ESSID\""
- fi
- fi
- fi
+ if [[ "$SECURITY" = "wep" ]]; then
+ WEP_OPTS="essid \"$ESSID\" key $KEY"
+ elif [[ "$SECURITY" = "none" ]]; then
+ WEP_OPTS="essid \"$ESSID\""
+ fi
- quirk predown && wireless_control "$INTERFACE" forcedown # madwifi FS#10585
+ quirk "predown" && ifconfig $INTERFACE down # madwifi FS#10585
- report_debug wireless_up iwconfig "$INTERFACE" $WEP_OPTS
- # JP: I don't understand why this needs to be an eval. What's wrong with just:
- # iwconfig "$INTERFACE" $WEP_OPTS
- if ! eval "iwconfig \"$INTERFACE\" $WEP_OPTS"; then
- report_fail "Couldn't configure wireless."
+ if ! eval iwconfig $INTERFACE $WEP_OPTS; then
+ err_append "Could not set wireless configuration."
return 1
fi
-
-
- quirk predown && wireless_control "$INTERFACE" up # madwifi FS#10585
+ quirk "predown" && ifconfig $INTERFACE up # madwifi FS#10585
- report_debug ethernet_up wep_check
- wep_check "$INTERFACE" "$TIMEOUT" || return 1
+ wep_check $INTERFACE $TIMEOUT||return 1
;;
-
wpa)
# Quirk for broken drivers... http://bbs.archlinux.org/viewtopic.php?id=36384
- if quirk wpaessid; then
- if [[ -n "$AP" ]]; then
- # JP: Since I don't undertand why the else block below is an eval, I'm not sure
- # if this command also needs to be eval'd
- iwconfig "$INTERFACE" ap "$AP"
- else
- # JP: I don't understand why this needs to be an eval. What's wrong with just:
- # iwconfig "$INTERFACE" essid "$ESSID"
- eval "iwconfig \"$INTERFACE\" essid \"$ESSID\""
- fi
- fi
+ quirk "wpaessid" && eval iwconfig $INTERFACE essid "\"$ESSID\""
- local WPA_CONF="${TMPDIR:-/tmp}/wpa.${1// /}" # substitute spaces out
- # make empty tmp dir with correct permissions, rename it
- rm -rf "$WPA_CONF"
- mv -f $(mktemp -d) "$WPA_CONF" || return 1
- echo "ctrl_interface=/var/run/wpa_supplicant" >> "$WPA_CONF/wpa.conf" # we know $WPA_CONF now has no spaces, but it may have other nasty chars, so still needs to be quoted
- echo "ctrl_interface_group=${WPA_GROUP:-wheel}" >> "$WPA_CONF/wpa.conf"
+ local WPA_CONF="/tmp/wpa.${1// /}" # substitute spaces out
+ echo "ctrl_interface=/var/run/wpa_supplicant" >> $WPA_CONF
+ echo "ctrl_interface_group=${WPA_GROUP:-wheel}" >> $WPA_CONF
+ chmod 600 $WPA_CONF
# Generate configuration
- if [[ "${#KEY}" -eq 64 ]]; then
- echo -e "network={ \nssid=\"$ESSID\" \npsk=$KEY \n}">> "$WPA_CONF/wpa.conf"
- # JP: formerly I had { \nssid=\"$ESSID\" \nproto=WPA \nkey_mgmt=WPA-PSK \npsk=$KEY \n}
- # JP: is what's above better?
- elif ! echo "$KEY" | wpa_passphrase "$ESSID" >> "$WPA_CONF/wpa.conf"; then
- report_fail "Couldn't generate WPA configuration."
- cat "$WPA_CONF/wpa.conf" >&2
+ if [[ "${#KEY}" == "64" ]]; then
+ echo -e "network={ \nssid=\"$ESSID\" \npsk=$KEY \n}">> $WPA_CONF
+ elif ! echo "$KEY" | wpa_passphrase "$ESSID" >> $WPA_CONF; then
+ err_append "Configuration generation failed. $(cat $WPA_CONF)"
return 1
fi
# Connect!
[[ -z "$WPA_OPTS" ]] && WPA_OPTS="-Dwext"
- report_debug wireless_up start_wpa "$INTERFACE" "$WPA_CONF/wpa.conf" "$WPA_OPTS"
- start_wpa "$INTERFACE" "$WPA_CONF/wpa.conf" "$WPA_OPTS" || return 1
- report_debug wireless_up wpa_check
- if ! wpa_check "$INTERFACE" "$TIMEOUT"; then
- stop_wpa "$INTERFACE"
+ start_wpa $INTERFACE $WPA_CONF $WPA_OPTS || return 1
+ if ! wpa_check $INTERFACE $TIMEOUT; then
+ stop_wpa $INTERFACE
return 1
fi
;;
wpa-config)
- . "$SUBR_DIR/8021x"
+ . ${SUBR_DIR}/8021x
[[ -z "$WPA_CONF" ]] && WPA_CONF="/etc/wpa_supplicant.conf" # defaults
[[ -z "$WPA_OPTS" ]] && WPA_OPTS="-Dwext"
- report_debug wireless_up start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_OPTS"
- start_wpa "$INTERFACE" "$WPA_CONF" "$WPA_OPTS" || return 1
- report_debug wireless_up wpa_check
- if ! wpa_check "$INTERFACE" "$TIMEOUT"; then
- stop_wpa "$INTERFACE"
+ start_wpa $INTERFACE $WPA_CONF $WPA_OPTS || return 1
+ if ! wpa_check $INTERFACE $TIMEOUT; then
+ stop_wpa $INTERFACE
return 1
fi
;;
esac
- if ! "$CONN_DIR/ethernet" up "$1"; then
- wireless_down "$1" YES
+ if ! ${CONN_DIR}/ethernet up $1; then
+ wireless_down $1 YES
return 1
fi
}
-# wireless_down PROFILE [ LEAVE ifconfig up? default no ]
wireless_down() {
- load_profile "$1"
- . "$SUBR_DIR/8021x"
- local PROFILE="$1" NOETHERNETDOWN="$2" # JP: made declarations local?? also, why introduce these vars if you're not going to use them?
- if ! checkyesno "$NOETHERNETDOWN"; then
- "$CONN_DIR/ethernet" down "$PROFILE"
+ load_profile $1
+ . ${SUBR_DIR}/8021x
+ PROFILE=$1 NOETHERNETDOWN=$2
+ if ! checkyesno $2; then
+ ${CONN_DIR}/ethernet down $1
fi
- report_debug wireless_down stop_wpa "$INTERFACE"
- stop_wpa "$INTERFACE"
- [[ "$SECURITY" == wpa ]] && rm -rf "/tmp/wpa.${PROFILE// /}" # remove tmp wpa config
- report_debug wireless_down iwconfig "$INTERFACE" essid off key off
- iwconfig "$INTERFACE" essid off key off &> /dev/null
- #wireless_control "$INTERFACE" forcedown # this is now handled in ethernet down, isn't it?
+ stop_wpa $INTERFACE
+ [[ "$SECURITY" == "wpa" ]] && rm -f "/tmp/wpa.${1// /}" # remove wpa config
+ iwconfig $INTERFACE essid off key off &> /dev/null
+ ifconfig $INTERFACE down
}
-# CONNECTION_query $INTERFACE [ profile | enabled (i.e. not rfkill-ed) | active (i.e. ifup'd) | associated | address ] [ "" | "-iproute" ]
-# "query associated" also uses $4=ESSID $5=AP if known
-wireless_query() {
- local INTERFACE="$1" REQUEST="$2" NEW="$3"
- #report_debug wireless_query "$@"
- case "$REQUEST" in
-
- profile)
- # return code = 1 if iface is available to be used
- # return code = 0 if unavailable (disabled, or in use by another profile or by external config)
- # echo "" | "disabled" | "external" | PROFILE_NAME
- if [[ ! -f "$STATE_DIR/interfaces/$INTERFACE" ]]; then
- # wireless interface is up but has no registered profile
- if ! wireless_query "$INTERFACE" enabled "$NEW"; then
- wireless_control disable "$INTERFACE" # STATE_DIR/interface should say "disabled" instead
- # iface should be down if it''s disabled
- wireless_control "$INTERFACE" down "$NEW"
- echo "disabled"
- return 0
- fi
- if wireless_query "$INTERFACE" address "$NEW"; then
- set_iface up "$INTERFACE" external
- echo "external"
- return 0
- fi
- # no ip address, count as inactive (even if associated)
- # should we tell iface to de-associate if still associated?
- # should we ifconfig iface down? no, may be up for a reason
- return 1
-
- else # interface is up and thinks it's running a profile
- . "$STATE_DIR/interfaces/$INTERFACE" # these files should only contain a PROFILE=... statement
- case "$PROFILE" in
- external)
- echo "external"
- return 0
- ;;
- disabled)
- # iface should be down if it's disabled
- wireless_control "$INTERFACE" down "$NEW"
- echo "disabled"
- return 0
- ;;
- *)
- ( # use subshell to prevent overwriting currently loaded profile
- . "$STATE_DIR/profiles/$PROFILE"
- if ! "$CONN_DIR/$CONNECTION" query "$INTERFACE" enabled; then
- report_warn "INTERFACE $INTERFACE is disabled; no longer being controlled by $PROFILE"
- set_profile down "$PROFILE"
- wireless_control disable "$INTERFACE"
- wireless_control "$INTERFACE" down "$NEW"
- echo "disabled"
- exit 0
- elif ! wireless_query "$INTERFACE" address "$NEW"; then
- report_warn "INTERFACE $INTERFACE is inactive; no longer being controlled by $PROFILE"
- set_profile down "$PROFILE"
- exit 1
- elif "$CONN_DIR/$CONNECTION" query "$INTERFACE" associated "$NEW" "$ESSID" "$AP"; then
- echo "$PROFILE" # associated with loaded profile
- exit 0
- else
- report_warn "INTERFACE $INTERFACE no longer being controlled by $PROFILE"
- set_profile down "$PROFILE"
- set_iface up "$INTERFACE" external
- echo "external"
- exit 0
- fi
- )
- # return $?
- ;;
- esac
- fi
- ;;
-
- enabled)
- local rfkill iftype
- for rfkill in /sys/class/rfkill/*; do
- if [[ -e "$rfkill/type" && -e "$rfkill/state" ]]; then
- iftype=$(cat "$rfkill/type")
- if [[ "$iftype" == wlan || "$iftype" == "${INTERFACE:0:${#INTERFACE}-1}" ]]; then # JP: don't really know what the range of values for this is
- # on my machine, the INTERFACE is wlan0 and the type=wlan
- test $(cat "$rfkill/state") -eq 1 # state is 1 when enabled, 2 when killed
- return $?
- fi
- fi
- done
-# # JP: this is easier, but I don't know if it can be relied on to stay in place...
-# if [[ -e /sys/class/net/$INTERFACE/device/rfkill/rfkill?/state ]]; then
-# test $(cat /sys/class/net/$INTERFACE/device/rfkill/rfkill?/state) -eq 1
-# return $?
-# fi
- return 0 # default to enabled
- ;;
-
- associated)
- # assumed to have ip address
- # return 0: associated with loaded profile
- # 1: associated with other
- # 2: still has ip address but unassociated: can this happen?
- local ESSID="$4" AP="$5"
- local essid=$(iwgetid "$INTERFACE" -r) ap=$(iwgetid "$INTERFACE" -ra)
- [[ -z "$ap" ]] && return 2
- if [[ -n "$AP" ]]; then
- [[ $(echo "$AP" | tr 'abcdef' 'ABCDEF') == "$ap" ]]
- return $?
- fi
- case "$ESSID" in
- # [Rr][Oo][Aa][Mm]|[Oo][Pp][Ee][Nn])
- # return 0
- # ;;
- *)
- if [[ "$NEW" == -iproute ]]; then
- # JP: ESSID is a regexp; we handle this here instead of in the wireless-dbus script for now
- expr match "$essid" "^$ESSID\$" >/dev/null
- return $? # returns true if matched more than 0 chars
- else
- [[ "$ESSID" == "$essid" ]]
- return $?
- fi
- ;;
- esac
- ;;
-
- active|address)
- "$CONN_DIR/ethernet$NEW" query "$INTERFACE" "$REQUEST"
- ;;
-
- *) return 1;;
- esac
-}
-
-# CONNECTION_control $INTERFACE [ up | down | forcedown | enable | disable ] [ "" | "-iproute" ]
-wireless_control() {
- local INTERFACE="$1" ACTION="$2" NEW="$3"
- #report_debug wireless_control "$@"
- case "$ACTION" in
- enable)
- [[ $(query_iface "$INTERFACE") == disabled ]] && set_iface "$INTERFACE" down
- ;;
- disable)
- set_iface up "$INTERFACE" disabled
- ;;
- up)
- if [[ "$NEW" = -iproute ]]; then
- "$CONN_DIR/ethernet-iproute" control "$INTERFACE" "$ACTION"
- else
- # JP: same as ethernet control ... up
- #ifconfig "$INTERFACE" up 2>/dev/null
- ifconfig "$INTERFACE" up
- wireless_query "$INTERFACE" active
- fi
- ;;
- down|forcedown)
- if [[ "$NEW" = -iproute ]]; then
- "$CONN_DIR/ethernet-iproute" control "$INTERFACE" "$ACTION"
- else
- # JP: differs slightly from ethernet control ... down (but I don't know whether the difference is really appropriate, I'm just preserving it from older codebase)
- ifconfig "$INTERFACE" 0.0.0.0
- if [[ "$2" = forcedown ]]; then
- ifconfig "$INTERFACE" down
- fi
- fi
- ;;
- *) return 1;;
- esac
-}
-
-wireless_verify() {
- local INTERFACE="$1"
- if [[ -d "/sys/class/net/$INTERFACE/phy80211" || -d "/sys/class/net/$INTERFACE/wireless" ]]; then
- return 0
- else
- return 1
- fi
-}
-
-wireless_$1 "$2" "$3" "$4" "$5" "$6"
+wireless_$1 $2
exit $?
# vim: set ts=4 et sw=4:
-
diff --git a/src/globals b/src/globals
deleted file mode 100644
index e227d51..0000000
--- a/src/globals
+++ /dev/null
@@ -1,118 +0,0 @@
-##################################
-##
-# /usr/lib/network/globals
-##
-##################################
-
-# JP: rather than declare these in several library files, we just declare them
-# once here, so they only need to be changed at a single point
-
-# JP: added the /etc/network.d/hooks directory
-# any +x files in that directory will be sourced when this file is sourced
-# they can override any of the utility functions defined here for custom behavior
-# (such as logging error messages to syslog, as I like to do)
-# this lets us keep netcfg simple but gives it the flexibility for users
-# to make modular use of it to do more complex things
-
-
-### Globals
-PROFILE_DIR="/etc/network.d/"
-HOOKS_DIR="$PROFILE_DIR/hooks/"
-SUBR_DIR="/usr/lib/network/"
-CONN_DIR="${SUBR_DIR}/connections/"
-STATE_DIR="/var/run/network/"
-
-
-### Logging/Error reporting
-#
-
-function report_err {
- printhl "$*"
-}
-
-function report_warn {
- printhl "$*"
-}
-
-function report_notify {
- true
-}
-
-function report_debug {
- true
-}
-
-function report_try {
- stat_busy "$*"
- REPORT_TRYING=1
-}
-
-function report_fail {
- if [[ -n "$*" ]]; then
- if [[ -n "$REPORT_TRYING" ]]; then
- stat_append "- $*"
- REPORT_TRYING=
- stat_fail
- else
- printhl "$*"
- fi
- elif [[ -n "$REPORT_TRYING" ]]; then
- REPORT_TRYING=
- stat_fail
- fi
-}
-
-function report_success {
- if [[ -n "$*" ]]; then
- stat_append "- $*"
- fi
- stat_done
-}
-
-### For calling scripts only; don't use in library functions
-
-function exit_stderr { echo "$*" >&2; exit 1; }
-function exit_err { report_err "$*"; exit 1; }
-function exit_fail { report_fail "$*"; exit 1; }
-
-
-
-function line_input {
- # saves $IFS and noglob shell option (to restore them, eval the output of this function)
- if [[ $(shopt -o noglob) =~ off ]]; then
- printf "set +f; IFS=%q" "$IFS"
- else
- printf "set -f; IFS=%q" "$IFS"
- fi
- # now set $IFS and noglob to handle line-at-a-time input
- set -f
- IFS=$'\n'
-}
-
-function load_hooks() {
- ### Load any +x files in $HOOKS_DIR
-
- # JP: we need to process line-at-a-time input (don't want to assume path to HOOKS_DIR and its content are all single bash tokens)
- # find ... | while read ... is no good because anything we do inside the while read ... subshell will be invisible to the outside calling context
-
-# # JP: this technique works in general (and is used elsewhere in the code)
-# # <(cmd) creates a file descriptor whose content is the stdout of cmd, which we then use as stdin by saying "< <(cmd)"
-#
-# # JP: HOWEVER, for reasons I don't understand, this construct can't be sourced from the Python wireless-dbus script
-# # Why bash can source the rest of the file but not that construct, just in that context, eludes me
-# if [[ -d "$HOOKS_DIR" ]]; then
-# while read h; do
-# source "$h"
-# done < <(find -L "$HOOKS_DIR/" -maxdepth 1 -type f -executable)
-# fi
-
- # JP: this might be a more elegant way to process input line-at-a-time without a pipe, anyway
- local h OLDIFS=$(line_input)
- for h in $(find -L "$HOOKS_DIR/" -maxdepth 1 -type f -executable | sort); do
- source "$h"
- done
- eval $OLDIFS
-}
-
-load_hooks
-
diff --git a/src/net-profiles b/src/net-profiles
index a4b964b..67ab5e8 100644
--- a/src/net-profiles
+++ b/src/net-profiles
@@ -2,17 +2,17 @@
. /etc/rc.conf
. /etc/rc.d/functions
-. /usr/lib/network/globals
case "$1" in
start)
if ! ck_daemon net-profiles; then
- exit_stderr "net-profiles is already running: try \"/etc/rc.d/net-profiles restart\""
+ echo "net-profiles has already been started. Try '/etc/rc.d/net-profiles restart'"
+ exit
fi
# Ensure any device renaming has occurred as intended
for daemon in "${DAEMONS[@]}"; do
- if [[ "$daemon" = "${daemon#!}" && "$daemon" = net-rename ]]; then
+ if [ "$daemon" = "${daemon#!}" -a "$daemon" = "net-rename" ]; then
if ck_daemon net-rename; then
/etc/rc.d/net-rename start
fi
@@ -20,65 +20,40 @@ case "$1" in
done
# $NET env var is passed from the kernel boot line
- # JP: is that true? or does $NET come from /etc/rc.conf?
- [[ -z "$NETWORKS_MENU_TIMEOUT" ]] && NETWORKS_MENU_TIMEOUT=5
+ [ ! "$NETWORKS_MENU_TIMEOUT" ] && NETWORKS_MENU_TIMEOUT=5
- if [[ "$NET" = menu ]]; then
- if /usr/bin/netcfg-menu "$NETWORKS_MENU_TIMEOUT"; then
- mv "$STATE_DIR"/{menu,net-profiles} # JP: user may want to disconnect profile by calling net-profiles stop
- add_daemon net-profiles
- exit 0
- fi
- elif [[ -n "$NET" ]]; then
- if /usr/bin/netcfg check-iface "$NET"; then
- echo "$NET" > "$STATE_DIR/net-profiles" # JP: user may want to disconnect profile by calling net-profiles stop
- add_daemon net-profiles
- exit 0
- fi
- else
+ if [[ "$NET" = "menu" ]]; then
+ /usr/bin/netcfg-menu $NETWORKS_MENU_TIMEOUT
+ elif [[ "$NET" ]]; then
+ /usr/bin/netcfg2 -c $NET
+ else
# No NET= passed at boot, go to NETWORKS=()
- for network in "${NETWORKS[@]}"; do
- case "$network" in
+ for network in ${NETWORKS[@]}; do
+ case $network in
menu) # Pull up menu of networks
- if /usr/bin/netcfg-menu "$NETWORKS_MENU_TIMEOUT"; then
- mv "$STATE_DIR"/{menu,net-profiles} # JP: user may want to disconnect profile by calling net-profiles stop
- add_daemon net-profiles
- exit 0
- fi
- break # if netcfg-menu was called but failed: exit for loop
+ /usr/bin/netcfg-menu $NETWORKS_MENU_TIMEOUT
;;
*) # Either interface or profile
- if [[ "$network" = "${network#!}" ]]; then # otherwise profile
- if /usr/bin/netcfg check-iface "$network"; then
- echo "$network" > "$STATE_DIR/net-profiles" # JP: user may want to disconnect profile by calling net-profiles stop
- add_daemon net-profiles
- exit 0
- fi
- break # found an enabled profile but failed to bring it up: exit for loop
+ if [ "$network" = "${network#!}" ]; then # otherwise profile
+ /usr/bin/netcfg2 -c $network
fi
;;
esac
done
- fi
+ fi
- exit_err "No profile started." # JP: don't add_daemon unless we were successful (above)
+ add_daemon net-profiles
;;
stop)
- if ck_daemon net-profiles; then
- exit_stderr "net-profiles not running"
- fi
-
# shutdown any profiles started by netcfg (or from NET_PROFILES in rc.conf)
- # JP: only attempt to disconnect the profiles we're controlling
- cat "${state_DIR}/net-profiles" 2>/dev/null | xargs -d'\n' /usr/bin/netcfg down # JP: use xargs in case any of the profile names contain spaces etc
- rm -f "$STATE_DIR/net-profiles"
+ /usr/bin/netcfg2 -a
rm_daemon net-profiles
;;
restart)
- "$0" stop; sleep 1; "$0" start
+ $0 stop; sleep 1; $0 start
;;
*)
- exit_stderr "Usage: $0 {start|stop|restart}"
+ echo "usage: $0 {start|stop|restart}"
esac
# vim: set ts=4 et sw=4:
diff --git a/src/net-rename b/src/net-rename
index 1cff1c1..db2c461 100644
--- a/src/net-rename
+++ b/src/net-rename
@@ -2,13 +2,12 @@
. /etc/rc.conf
. /etc/rc.d/functions
-. /usr/lib/network/globals
case "$1" in
start)
- report_try "Renaming network devices"
+ stat_busy "Renaming network devices"
ifrename -p -t
- report_success
+ stat_done
add_daemon net-rename
;;
@@ -18,10 +17,9 @@ case "$1" in
/bin/true
;;
restart)
- "$0" start
+ $0 start
;;
*)
- exit_stderr "Usage: $0 {start|stop|restart}"
- ;;
+ echo "usage: $0 {start|stop|restart}"
esac
# vim: set ts=4 et sw=4:
diff --git a/src/netcfg b/src/netcfg
index 8f03ea2..3222d46 100644
--- a/src/netcfg
+++ b/src/netcfg
@@ -4,7 +4,7 @@
. /etc/rc.d/functions
. /usr/lib/network/network
-NETCFG_VER=2.3.0b1
+NETCFG_VER=2.2.1
version()
{
@@ -18,69 +18,45 @@ usage()
echo " Start specified profile: netcfg profile "
echo " Other functions: netcfg argument profile"
echo "Arguments:"
- echo " current Report currently running profiles"
echo "-a, all-down Take all active profiles down"
echo "-c, check-iface Do not start profile if interface is already up"
echo "-d, down Take specified profile down"
echo "-h, help This help message"
echo "-i, iface-down Take down profile active on specified interface"
- echo "-l, list List all available profiles"
echo "-r, reconnect Disconnect and reconnect specified profile"
echo "-u, up Start specified profile"
echo "-v, version Output version information and exit"
echo " all-resume Resume previously suspended profiles and reconnect them"
echo " all-suspend Store a list of current running profiles and suspend them"
- exit 1
}
-# TODO: rewrite with getopts from BashFAQ
+# TODO: Re-add ROOT check and rewrite with getopts from BashFAQ
-case "$1" in
+case $1 in
--version|-v|version)
- version
- exit 0;;
+ version;;
--help|-h|help)
usage;;
- list|-l)
- echo "Available Profiles"
- echo "------------------"
- list_profiles
- exit 0;;
- current)
- if [[ -d "$STATE_DIR/profiles/" ]]; then
- ls "$STATE_DIR/profiles/"
- exit 0
- else
- exit_err "No active profiles."
- fi;;
-esac
-
-if [[ $(id -u) -gt 0 ]]; then
- exit_stderr "This script should be run as root."
-fi
-
-case "$1" in
-
-c|check-iface|-u|up)
- CHECK=YES
- profile_up "$2";;
+ CHECK="YES";
+ profile_up $2;;
clean)
- rm "$STATE_DIR/interfaces"/* 2> /dev/null
- rm "$STATE_DIR/profiles"/* 2> /dev/null
- rm "$STATE_DIR/suspend"/* 2> /dev/null
- rm "$STATE_DIR/last_profile" 2> /dev/null
+ rm /var/run/network/interfaces/* 2> /dev/null
+ rm /var/run/network/profiles/* 2> /dev/null
+ rm /var/run/network/suspend/* 2> /dev/null
+ rm /var/run/network/last_profile 2> /dev/null
killall wpa_supplicant 2> /dev/null
killall dhcpcd 2> /dev/null
;;
-d|down)
- profile_down "$2";;
+ profile_down $2;;
-i|iface-down)
- interface_down "$2";;
+ interface_down $2;;
-a|all-down)
all_down;;
-r|reconnect)
- profile_down "$2"
- profile_up "$2";;
+ profile_down $2
+ profile_up $2;;
all-resume)
all_resume;;
all-suspend)
@@ -88,8 +64,8 @@ case "$1" in
-*|--*)
usage;;
*)
- if [[ -n "$1" ]]; then
- profile_up "$1"
+ if [ -n "$1" ]; then
+ profile_up $1
else
usage
fi
diff --git a/src/netcfg-menu b/src/netcfg-menu
index 70acf5a..8c58edc 100644
--- a/src/netcfg-menu
+++ b/src/netcfg-menu
@@ -4,58 +4,57 @@
. /etc/rc.d/functions
. /usr/lib/network/network
-# JP: we'll use $STATE_DIR/menu to record what profile is being connected in this way
-rm -f "$STATE_DIR/menu"
# Scan all profiles
i=0
-while read prof; do
+for prof in `find -L $PROFILE_DIR -maxdepth 1 -type f -printf "%f\n"|sort`; do
# if there is a profile called "main", Use as default
- [[ "$prof" = main ]] && DEFAULT=main
- unset DESCRIPTION # JP: we cant sandbox the sourced profiles, because we need to expose the profiles array
- . "$PROFILE_DIR/$prof"
- profiles[$i]="$prof"
- let i++
- profiles[$i]="$DESCRIPTION"
- let i++
-done < <(list_profiles | sort) # JP: re-use list_profiles instead of duplicating it; avoid subshell we'd get by piping it to the while read...
-
-if [[ ${#profiles} -eq 0 ]]; then
- exit_err "No profiles were found in $PROFILE_DIR"
+ [ "$prof" = "main" ] && DEFAULT=$prof
+ unset DESCRIPTION
+ . $PROFILE_DIR/$prof
+ profiles[$i]=$prof
+ i=$((i+1))
+ profiles[$i]=$DESCRIPTION
+ i=$((i+1))
+done
+
+if [ ${#profiles} -eq 0 ]; then
+ echo "No profiles were found in $PROFILE_DIR"
+ return 1
fi
-[[ -n "$NETWORKS_MENU_DEFAULT" ]] && DEFAULT="$NETWORKS_MENU_DEFAULT"
# if no default yet, use the first entry
-[[ -z "$DEFAULT" ]] && DEFAULT="${profiles[0]}"
-ANSWER=$(mktemp /tmp/menu.XXXXXXXX) || exit 1
+[ "$NETWORKS_MENU_DEFAULT" ] && DEFAULT="$NETWORKS_MENU_DEFAULT"
+
+[ "$DEFAULT" = "" ] && DEFAULT=${profiles[0]}
+ANSWER=$(mktemp) || exit 1
# Set timeout
-TIMEOUT="${1:-0}" # JP: equivalent to the block that was here before
+if [ "$1" = "" ]; then
+ TIMEOUT="0"
+else
+ TIMEOUT="$1"
+fi
# Display Dialog
-dialog --timeout "$TIMEOUT" --default-item "$DEFAULT" \
+dialog --timeout $TIMEOUT --default-item $DEFAULT \
--menu "Select the network profile you wish to use" \
- 13 50 6 "${profiles[@]}" 2> $ANSWER
+ 13 50 6 "${profiles[@]}" 2>$ANSWER
ret=$?
case $ret in
1) ;; # Cancel - do nothing
255) # timeout - use default
- profile_up "$DEFAULT" # JP: use profile_up and catch $?
- ret=$?
- if [[ $ret -eq 0 ]]; then echo "$DEFAULT" > "$STATE_DIR/menu"; fi
+ netcfg2 $DEFAULT
;;
0) # User selection
- profile_up "$(cat $ANSWER)"
- ret=$?
- if [[ $ret -eq 0 ]]; then mv $ANSWER "$STATE_DIR/menu"; fi
+ netcfg2 $(cat $ANSWER)
;;
- *) # Shouldn't happen
- echo "Abnormal ret code from dialog: $ret" >&2
+ *) # Shouldnt happen
+ echo "Abnormal ret code from dialog: $ret"
;;
esac
-rm -f $ANSWER # JP: add -f
-exit $ret # JP: exit with caught $?
+rm $ANSWER
# vim: set ts=4 et sw=4:
diff --git a/src/network b/src/network
index 2720caa..b45caaa 100644
--- a/src/network
+++ b/src/network
@@ -1,402 +1,284 @@
-##################################
-##
-# /usr/lib/network/network
-##
-##################################
+### Globals
+PROFILE_DIR="/etc/network.d/"
+SUBR_DIR="/usr/lib/network/"
+CONN_DIR="${SUBR_DIR}/connections/"
+STATE_DIR="/var/run/network/"
-. /usr/lib/network/globals
+### Messages
+##
+# err msg
+# output specified message
+err_append() {
+ echo " - $*"
+}
+err() {
+ printhl "$*"
+}
-### Profile listing and loading
+### Profile loading
##
-# list_profiles
-# Outputs a list of all profiles
-list_profiles() {
- # JP: follow aliases with -L, also skip profiles that start with '.' or end with '~' or '.conf' (so profile.conf can be the wpa.conf file for profile)
- find -L "$PROFILE_DIR/" -maxdepth 1 -type f -not -name '*~' -not -name '*.conf' -not -name '.*' -printf "%f\n"
-}
# load_profile profile
# source the profile
load_profile() {
- validate_profile "$1" || return 1
- . "$PROFILE_DIR/$1"
+ validate_profile $1 || return 1
+ . $PROFILE_DIR/$1
}
# validate_profile profile
# check whether profile exists and is usable
-validate_profile() {
+validate_profile()
+{
[[ -z "$1" ]] && return 1
- if [[ ! -f "$PROFILE_DIR/$1" ]]; then
- report_err "Profile \"$1\" does not exist."
+ if [[ ! -f $PROFILE_DIR/$1 ]]; then
+ err "Profile \"$1\" does not exist"
return 1
fi
- . "$PROFILE_DIR/$1"
+ . $PROFILE_DIR/$1
if [[ -z "$INTERFACE" ]]; then
- report_err "Profile error: no INTERFACE to configure."
+ err "Profile missing an interface to configure"
return 1
fi
- if [[ ! -f "$CONN_DIR/$CONNECTION" ]]; then
- report_err "Profile error: $CONNECTION is not a valid connection, check spelling or look at examples."
+ if [[ ! -f $CONN_DIR/$CONNECTION ]]; then
+ err "$CONNECTION is not a valid connection, check spelling or look at examples"
return 1
fi
}
-### Profile suspend/resume
+### Profile up/down
##
-# interface_suspend interface/all [call_profile_down? default=yes]
-# store a list of running profiles and take them down (unless $2 is no)
-interface_suspend() {
- report_debug interface_suspend "$@"
-
- [[ ! -d "$STATE_DIR" ]] && mkdir -p "$STATE_DIR"/{interfaces,profiles}
- [[ ! -d "$STATE_DIR/suspend" ]] && mkdir "$STATE_DIR/suspend"
-
- find "$STATE_DIR/profiles/" -maxdepth 1 -type f -printf '%f\n' \
- | while read prof; do
- # the pipe to "while read" will create a subshell, so sourced variables will already be in a sandbox
- # we just need to clear INTERFACE which is all we care about
- unset INTERFACE
- . "$STATE_DIR/profiles/$prof"
- if [[ "$1" == all || "$1" == "$INTERFACE" ]]; then
- report_notify "suspending interface $INTERFACE with profile $prof"
- cp "$STATE_DIR/profiles/$prof" "$STATE_DIR/suspend/"
- if checkyesno "${2:-yes}"; then
- profile_down "$prof"
- fi
- fi
+# all_down
+# take all profiles down
+#
+all_down()
+{
+ for prof in $(find ${STATE_DIR}/profiles/ -maxdepth 1 -type f -printf '%f\n'); do
+ profile_down $prof
done
}
+
# all_suspend
# store a list of running profiles and take them down
-all_suspend() {
- interface_suspend all
+#
+all_suspend()
+{
+ [[ ! -d $STATE_DIR ]] && mkdir -p $STATE_DIR/{interfaces,profiles}
+ [[ ! -d $STATE_DIR/suspend ]] && mkdir $STATE_DIR/suspend
+
+ for prof in $(find $STATE_DIR/profiles/ -maxdepth 1 -type f); do
+ cp $prof $STATE_DIR/suspend/
+ profile_down $(basename $prof)
+ done
}
-# all_resume
-# resume suspended interfaces
-# optional arguments: interfaces not to resume (e.g., because they're disabled)
-all_resume() {
- report_debug all_resume "$@"
- find "$STATE_DIR/suspend/" -maxdepth 1 -type f -printf '%f\n' \
- | while read prof; do
- # the pipe to "while read" will create a subshell, so sourced variables will already be in a sandbox
- # we just need to clear INTERFACE which is all we care about
- unset INTERFACE
- . "$STATE_DIR/suspend/$prof"
- if [[ $# -eq 0 || ! " $* " =~ " $INTERFACE " ]]; then
- report_notify "resuming interface $INTERFACE with profile $prof"
- profile_up "$prof"
- rm -f "$STATE_DIR/suspend/$prof" # if profile_up succeeds, it will have already removed this
- fi
+# all_suspend
+# store a list of running profiles and take them down
+#
+all_resume()
+{
+ for prof in $(find $STATE_DIR/suspend/ -maxdepth 1 -type f); do
+ profile_up $(basename $prof)
+ rm $prof
done
}
-### Profile up/down
-##
-# profile_up profile [literal essid]
+# profile_up profile
# put all profiles up
#
-profile_up() {
+profile_up()
+{
(
# Keep inside subshell so that options from one profile don't cross to others
- # exit 1 used in a subshell is effectively exiting a new process
- [[ ! -d "$STATE_DIR" ]] && mkdir -p "$STATE_DIR"/{interfaces,profiles,suspend}
-
- local status PROFILE="$1" # save PROFILE in a variable so that it's available to PREUP/POSTDOWN etc hooks
+ # exit 1 used as a subshell is effectively a new process
+ [[ ! -d $STATE_DIR ]] && mkdir -p $STATE_DIR/{interfaces,profiles}
- load_profile "$PROFILE" || exit 1
+ load_profile $1 || exit 1
- if check_profile "$PROFILE"; then
- report_err "$PROFILE already connected."
- exit 1
- fi
+ check_profile $1 && err "$1 already connected" && exit 1
# NETWORKS_EXCLUSIVE, rc.conf: Profiles are globally mutually exclusive
# EXCLUSIVE, network.d/profile: Individual profile is mutually exclusive
- if checkyesno "$NETWORKS_EXCLUSIVE" || checkyesno "$EXCLUSIVE"; then
+ if checkyesno $NETWORKS_EXCLUSIVE || checkyesno $EXCLUSIVE; then
all_down
fi
- report_try "$PROFILE up"
+ stat_busy "$1 up"
- status=$(query_iface "$INTERFACE" "$CONNECTION")
- report_debug "status reported to profile_up as: $status"
-
- if [[ -n "$status" && "$status" != "$PROFILE" ]]; then
- case "$status" in
- disabled)
- # interface radio-switch disabled
- report_fail "INTERFACE $INTERFACE is disabled."
- exit 1
- ;;
- external)
- # interface being controlled externally
- report_fail "INTERFACE $INTERFACE was configured by another application."
- exit 1
- ;;
- *)
- # report_fail if iface in use by another profile? (default no)
- if checkyesno "$CHECK"; then
- report_fail "INTERFACE $INTERFACE already in use by another profile."
- exit 1
- elif ! ( # use subshell so interface_down -> profile_down doesn't overwrite loaded profile
- interface_down "$INTERFACE" "$CONNECTION" # supply current CONNECTION-type as hint
- ); then
- report_fail
- exit 1
- fi
- ;;
- esac
- fi
+ if check_iface $INTERFACE; then
+ if checkyesno $CHECK; then
+ err_append "Interface $INTERFACE already in use"
+ stat_fail && exit 1
+ else
+ interface_down $INTERFACE || exit 1
+ load_profile $1
+ fi
+ fi
-
- if ! ( eval $PRE_UP ); then # JP: sandbox the eval so variables don't bleed into current function
- report_debug profile_up "PRE_UP failed"
- report_fail
- exit 1
- fi
+ eval $PRE_UP || exit 1
- if ! "$CONN_DIR/$CONNECTION" up "$PROFILE" "$2"; then
- report_debug profile_up "connect failed"
- report_fail
- # "$CONN_DIR/$CONNECTION" down "$PROFILE" "$2" # JP: should we do this to make sure?
+ if ! ${CONN_DIR}/${CONNECTION} up $1; then
+ stat_fail
exit 1
fi
- if ! ( eval $POST_UP ); then # JP: sandbox the eval
- report_debug profile_up "POST_UP failed"
- report_fail
- # failing POST_UP will take interface down
- "$CONN_DIR/$CONNECTION" down "$PROFILE" "$2"
- exit 1
- fi
+ eval $POST_UP || exit 1
- set_profile up "$PROFILE"
- # unset EXCLUSIVE
- report_success
+ set_profile up $1
+ unset EXCLUSIVE
+
+ stat_done
); return $?
}
+
# profile_down profile
# take profile down
#
-profile_down() {
+profile_down()
+{
(
- [[ ! -d "$STATE_DIR" ]] && mkdir -p "$STATE_DIR"/{interfaces,profiles,suspend}
+ [[ ! -d $STATE_DIR ]] && mkdir -p $STATE_DIR/{interfaces,profiles}
- local status PROFILE="$1" # save PROFILE in a variable so that it's available to PREUP/POSTDOWN etc hooks
-
- load_profile "$PROFILE" || exit 1
-
- status=$(query_iface "$INTERFACE" "$CONNECTION")
- report_debug "status reported to profile_down as: $status"
+ load_profile $1 || exit 1
- if [[ "$status" != "$PROFILE" ]]; then
- # if interface not available to be controlled by netcfg, then
- # any profiles will have been removed by check_iface
- # else another profile is running
- report_err "Profile wasn't connected."
- exit 1
- fi
+ if ! check_profile $1; then
+ err "Profile not connected"
+ exit 1
+ fi
- report_try "$PROFILE down"
-# JP: the following will have already been caught by the block above...
-# if [[ "$status" == external ]]; then
-# report_fail "Interface $INTERFACE was configured by another application."
-# exit 1
-# fi
+ stat_busy "$1 down"
+ if [[ "$(get_iface_prof $INTERFACE)" == "external" ]]; then
+ err_append "$interface was connected by another application"
+ stat_fail
+ exit 1
+ fi
- if ! ( eval $PRE_DOWN ); then # JP: sandbox the eval
- report_debug profile_down "PRE_DOWN failed"
- true # JP: did we want failing PRE_DOWN to leave the profile active?
- # report_fail
- # exit 1
- fi
+ eval $PRE_DOWN || exit 1
- if ! "$CONN_DIR/$CONNECTION" down "$PROFILE" "$2"; then
- report_debug profile_up "disconnect failed"
- report_fail
+ if ! ${CONN_DIR}/${CONNECTION} down $1; then
+ stat_fail
exit 1
fi
- if ! ( eval $POST_DOWN ); then # JP: sandbox the eval
- report_debug profile_down "POST_DOWN failed"
- report_fail
- exit 1
- fi
+ eval $POST_DOWN || exit 1
- set_profile down "$PROFILE"
- report_success
+ set_profile down $1
+ stat_done
); return $?
}
-# all_down
-# take all registered profiles down
-all_down() {
- find "$STATE_DIR/profiles/" -maxdepth 1 -type f -printf '%f\n' \
- | while read prof; do
- profile_down "$prof"
- done
-}
-# interface_down interface
-# take interface down
-#
-interface_down() {
- local status=$(query_iface "$@") # we may not be hinting what CONNECTION type to use, e.g. when called from /usr/bin/netcfg
- case "$status" in
- none|disabled) return 0;;
- external) return 1;;
- *) profile_down "$status";;
- esac
-}
-
-### Status setting functions
-##
-# set_profile up/down profile
-# Set profile state, either up or down
-#
-set_profile() {
- if [[ "$1" == up ]]; then
- ( # subshell creates sandbox for sourced variables
- . "$PROFILE_DIR/$2"
- cp "$PROFILE_DIR/$2" "$STATE_DIR/profiles/"
- echo "$2" > "$STATE_DIR/last_profile"
- set_iface up "$INTERFACE" "$2"
- )
- elif [[ "$1" == down && -f "$STATE_DIR/profiles/$2" ]]; then
- ( # subshell
- . "$STATE_DIR/profiles/$2"
- rm "$STATE_DIR/profiles/$2"
- set_iface down "$INTERFACE" "$2"
- )
+# Check if variable is a member of an array
+inarray()
+{
+search=$1
+shift
+for item in $*; do
+ if [[ "$item" == "$search" ]]; then
+ return 0
fi
+done
+return 1
}
-# set_iface up/down interface [profile/disabled/external]
-# Set interface status to up/down (really up means "unavailable" (may be down & disabled) and down means "available"
-# optionally link it to a profile.
-#
-set_iface() {
- local PROFILE="${3:-external}" # JP: this is equivalent to the two-line block that was here before
- if [[ "$1" == up ]]; then
- echo "PROFILE=$PROFILE" > "$STATE_DIR/interfaces/$2"
- elif [[ "$1" == down ]]; then
- rm -f "$STATE_DIR/interfaces/$2" # JP: add -f so we don't complain if the interface isn't up
- fi
+quirk() {
+inarray $1 ${QUIRKS[@]}
+return $?
}
+# interface_down interface
+# take interface down
+#
+interface_down()
+{
+ local prof=$(get_iface_prof $1)
+ profile_down $prof
+ return $?
+}
-
-### Checking/querying functions
+### Query functions
##
# check_iface interface
# Return 0 if interface up
# Return 1 if interface down
#
check_iface() {
- [[ -f "$STATE_DIR/interfaces/$1" ]] && return 0
- return 1
+ [[ -f $STATE_DIR/interfaces/$1 ]] && return 0
+ return 1
}
-############################################################################
-# Note: get_iface_prof left in for compatibility with any external code that calls it
-# but in this codebase, it's superceded by query_iface
# get_iface_prof interface
# Echo interface profile and return 0 if up
# Return 1 if down.
#
get_iface_prof() {
- if check_iface "$1"; then
- . "$STATE_DIR/interfaces/$1"
+ if check_iface $1; then
+ . $STATE_DIR/interfaces/$1
echo $PROFILE
else
return 1
fi
}
-############################################################################
+
+# list_profiles
+# Outputs a list of all profiles
+list_profiles() {
+ find $PROFILE_DIR/ -maxdepth 1 -type f -printf "%f\n"
+}
# check_profile profile
-# Return 0 if profile registered as being up
-# Return 1 if profile not registered
+# Return 0 if profile up
+# Return 1 if profile down
#
check_profile() {
- [[ -f "$STATE_DIR/profiles/$1" && ! -f "$STATE_DIR/suspend/$1" ]] && return 0
+ [[ -f $STATE_DIR/profiles/$1 ]] && return 0
return 1
-}
-
-
-# query_iface interface [connection]
-# Return 0 if interface up or otherwise unavailable for connecting
-# Return 1 if interface down (and so free to be connected)
-# echoes which profile controls the interface (or "external" or "disabled")
-
-query_iface() {
-
- local INTERFACE="$1" PROFILE connection="$2"
-
- if [[ -z "$connection" ]]; then # JP: the difficulty with factoring this code into the CONNECTION routines
- # is that we sometimes want to query/control the interface without knowing what CONNECTION type it instantiates
- # so we supply the CONNECTION type as a hint ($2) when possible
- # and when CONNECTION wasn't hinted, we default to wireless-dbus if iface verifies as wireless, else ethernet-iproute
- if "$CONN_DIR/wireless-dbus" verify "$INTERFACE"; then
- connection=wireless-dbus
- else
- connection=ethernet-iproute
- fi
- fi
-
- if ! "$CONN_DIR/$connection" query "$INTERFACE" active; then
- # interface is not up
- if [[ -f "$STATE_DIR/interfaces/$INTERFACE" ]]; then # but the interface thinks it's running a profile...
- . "$STATE_DIR/interfaces/$INTERFACE" # these files should only contain a PROFILE=... statement
- if [[ "$PROFILE" == disabled ]]; then
- echo "disabled"
- return 0
- elif [[ "$PROFILE" != external ]]; then
- report_warn "INTERFACE $INTERFACE no longer being controlled by $PROFILE"
- set_profile down "$PROFILE"
- PROFILE=
- fi
- set_iface down "$INTERFACE" # update iface status: no longer profile/external
- fi
- echo "$PROFILE"
- return 1
- else
- "$CONN_DIR/$connection" query "$INTERFACE" profile
- return $?
- fi
+}
-}
-
-
-### Utility functions
+### Status setting functions
##
-# Check if variable is a member of an array
-inarray() {
- local item search="$1"
- shift
- for item; do
- if [[ "$item" == "$search" ]]; then
- return 0
- fi
- done
- return 1
+# set_profile up/down profile
+# Set profile state, either up or down
+#
+set_profile() {
+ if [[ "$1" == "up" ]]; then
+ . $PROFILE_DIR/$2
+ cp $PROFILE_DIR/$2 $STATE_DIR/profiles/
+ echo $2 > $STATE_DIR/last_profile
+ set_iface up $INTERFACE $2
+
+ elif [[ "$1" == "down" ]]; then
+ . $STATE_DIR/profiles/$2
+ rm $STATE_DIR/profiles/$2
+ set_iface down $INTERFACE $2
+ fi
}
-quirk() {
- inarray "$1" "${QUIRKS[@]}"
+# set_iface up/down interface [profile]
+# Set interface status to up/down
+# optionally link it to a profile.
+#
+set_iface() {
+ PROFILE=$3
+ [[ -z "$PROFILE" ]] && PROFILE=external
+ if [[ "$1" == "up" ]]; then
+ echo "PROFILE=$PROFILE" > $STATE_DIR/interfaces/$2
+ elif [[ "$1" == "down" ]]; then
+ rm $STATE_DIR/interfaces/$2
+ fi
}
+
### From FreeBSD's /etc/rc.subr
##
# checkyesno var
# Test $1 variable, and warn if not set to YES or NO.
# Return 0 if it's "yes" (et al), nonzero otherwise.
#
-checkyesno() {
- local _value="$1"
+checkyesno()
+{
+ _value=${1}
#debug "checkyesno: $1 is set to $_value."
- case "$_value" in
+ case $_value in
# "yes", "true", "on", or "1"
[Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
@@ -413,5 +295,3 @@ checkyesno() {
;;
esac
}
-
-
diff --git a/src/wireless_utils b/src/wireless_utils
deleted file mode 100644
index d27c43b..0000000
--- a/src/wireless_utils
+++ /dev/null
@@ -1,141 +0,0 @@
-##################################
-##
-# /usr/lib/network/wireless_utils
-##
-##################################
-
-# Uses wireless_tools, to check for association to a network.
-# wep_check interface [timeout]
-wep_check() {
- local INTERFACE="$1" TIMEOUT="${2:-15}" timeout=0 bssid
-
- while [[ "$timeout" -lt "$TIMEOUT" ]]; do
- bssid=$(iwgetid "$INTERFACE" -ra)
- [[ -n "$bssid" && "$bssid" != "00:00:00:00:00:00" ]] && return 0
- sleep 1
- let timeout++
- done
-
- report_fail "Couldn't associate with wireless network."
- return 1
-}
-
-# Check if a particular network is within range
-# find_essid interface essid connection (we treat ESSID as regexp when CONNECTION=wireless-dbus)
-find_essid() {
- local INTERFACE="$1" ESSID="$2" CONNECTION="$3" RETRIES=20 try=0 res scanned
- while [[ "$try" -lt "$RETRIES" ]]; do
- sleep 0.5
- let try++
- if [[ "$CONNECTION" == wireless-dbus ]]; then
- # JP: ESSID is a regexp
- found=$(
- res=$(iwlist "$INTERFACE" scan 2>/dev/null)
- [[ -z "$res" ]] && exit 1
- # if results were non-null, process them and exit 0
- echo "$res" | sed -nr 's/^\s+ESSID:"([^"]*)"$/\1/p' | egrep -xm1 "$ESSID"
- )
- else
- found=$(
- res=$(iwlist "$INTERFACE" scan 2>/dev/null)
- [[ -z "$res" ]] && exit 1
- # if results were non-null, process them and exit 0
- echo "$res" | sed -nr 's/^\s+ESSID:"([^"]*)"$/\1/p' | fgrep -xm1 "$ESSID"
- )
- fi && {
- scanned=1
- report_debug find_essid "\"$found\""
- # we only bother with at most 5 successful scans
- if (( try < RETRIES-4 )); then try=$((RETRIES-4)); fi
- }
- if [[ -n "$found" ]]; then
- echo "$found" # JP: echo literal ESSID
- return 0 # network found
- fi
- done
- if [[ "$scanned" -ne 1 ]]; then
- report_debug find_essid "unable to scan"
- fi
- return 1
-}
-
-# Check if a particular network is within range
-# find_ap interface ap
-find_ap() {
- local INTERFACE="$1" ap=$(echo "$2" | tr 'abcdef' 'ABCDEF') RETRIES=20 try=0 res scanned
- while [[ "$try" -lt "$RETRIES" ]]; do
- sleep 0.5
- let try++
- found=$(
- res=$(iwlist "$INTERFACE" scan 2> /dev/null)
- [[ -z "$res" ]] && exit 1
- # if results were non-null, process them and exit 0
- echo "$res" | sed -nr '/^\s+Cell .. - Address: ([[:xdigit:]:]+)$/ { s//\1/; N; s/(.*)\n\s+ESSID:"([^"]*)"$/\1\t\2/p }' \
- | egrep -m1 "^$ap\t"
- ) && {
- scanned=1
- report_debug find_ap "\"$found\""
- # we only bother with at most 5 successful scans
- if (( try < RETRIES-4 )); then try=$((RETRIES-4)); fi
- }
- if [[ -n "$found" ]]; then
- echo "$found" | cut -f2 # JP: echo literal ESSID
- return 0
- fi
- done
- if [[ "$scanned" -ne 1 ]]; then
- report_debug find_ap "unable to scan"
- fi
- return 1
-}
-
-# Return a filename containing a list of network APs and ESSIDs found (sorted by decreasing signal strength)
-# list_networks interface
-list_networks() {
- local INTERFACE="$1" essids try=0 RETRIES=20 res scanned
- # temp file used, as keeping ESSID's with spaces in their name in arrays
- # is hard, obscure and kinda nasty. This is simpler and clearer.
-
- [[ -z "$INTERFACE" ]] && return 1
- essids=$(mktemp /tmp/essid.XXXXXXXX)
-
-# # James suggested using this, but it requires wpa_supplicant to be running
-# wpa_cli -i "$INTERFACE" scan 2>/dev/null || { rm $essids; return 1; }
-# sleep 0.5
-# wpa_cli -i "$INTERFACE" scan_results > $essids 2>/dev/null || { rm $essids; return 1; }
-
- {
- while [[ "$try" -lt "$RETRIES" ]]; do
- sleep 0.5
- let try++
- # iwlist "$INTERFACE" scan 2> /dev/null | fgrep "ESSID" | sed 's/.*ESSID:"\([^"]\+\)".*/\1/' > $essids
- res=$(iwlist "$INTERFACE" scan 2> /dev/null)
- [[ -z "$res" ]] && continue
- scanned=1
- # we only bother with at most 5 successful scans
- if (( try < RETRIES-4 )); then try=$((RETRIES-4)); fi
- echo "$res" | sed -r '1d; $ { H; ba }; 2 { h; d }; /^\s+Cell /! { H; d }; :a; x; s/\n/ /g'
- done
- } \
- | sed -rne 's/.*Address: ([[:xdigit:]:]+).*ESSID:"([^"]*)".*Quality=([0-9]+).*/\1\t\3\t\1\t\2/p' \
- -e 's/.*Address: ([[:xdigit:]:]+).*Quality=([0-9]+).*ESSID:"([^"]*)".*/\1\t\2\t\1\t\3/p' \
- | sort -k1 -k2nr | uniq -w17 \
- | sort -k2nr \
- | cut -f3- > "$essids"
- # 1. make tab-separated fields: ap, signal-strength, ap, essid (easiest way to use uniq and cut here requires ap twice)
- # 2. eliminate duplicate aps (keeping strongest signal)
- # 3. sort entire list by decreasing signal
- # 4. then return tab-separated fields: ap, essid (ap needs to come first so that read can assume format is <word> <rest of line>)
-#
- # File of 0 length, ie. no ssid's.
- if [[ ! -s $essids ]]; then
- rm $essids
- return 1
- fi
-
- echo $essids
- return 0
-}
-
-
-# vim: set ts=4 et sw=4 ft=sh: