summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-09-27Rename autowifi->wpa_actiond, add makefile, bugfixJames Rayner4-4/+5
2009-09-27Remove wpa generation duplication, fix wep/none-oldJames Rayner3-65/+54
2009-09-27Only flush when disabling wireless interface, tidy up down/forcedownJames Rayner3-18/+15
2009-09-27Fix incorrect continue, and config generationJames Rayner1-4/+4
2009-09-25Integrate netcfg into autowifiJames Rayner2-0/+132
This is implemented almost entirely as suggested by Thomas, and it depends on autowifi which is his work. autowifi-netcfg provides proper roaming and automatic wireless though wpa_supplicant. To run, use autowifi-netcfg $interface
2009-09-25Large rework of wireless to use wpa_supplicantJames Rayner2-97/+83
* Connect SECURITY=wep|none with wpa_supplicant * Separate out iwconfig based configuration as -old as a fallback for older hardware * Drop some old quirks, as they're mostly needed for iwconfig based or are needed by deprecated drivers * Drop wpa_passphrase and just generate a config.
2009-09-23Add WPA_DRIVER, WPA_COUNTRY and handle WEP string keysJames Rayner3-14/+19
WPA_DRVER: Configure the -D argument to wpa_supplicant, for example -Dnl80211 WPA_COUNTRY: Set the 'country=' variable in the wpa_supplicant configuration. WEP string keys: modified such that they may work. Not tested yet.
2009-09-22Fix silly codeJames Rayner1-18/+13
2009-09-22Rework wireless to use wpa_supplicant more, add CONFIGSECTION supportJames Rayner3-57/+69
CONFIGSECTION will be useful later on for integration with autowifi. It'll allow WPA configurations to be stored _in_ the profile, rather than separately. Experimentally, WEP/none support has been migrated to wpa_supplicant. Support for string keys has not yet been merged.
2009-09-22Merge connections ethernet/ethernet-iprouteJames Rayner10-235/+97
2009-09-14Rename set_interface to bring_interfaceJim Pryor5-17/+17
3. Change the name of "set_interface up/down..." to "bring_interface up/down" to differentiate it from the similarly-named, merely record-keeping functions. Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14don't count profile as connected if it was suspended without a profile-downJim Pryor1-1/+1
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14added more contrib/ filesJim Pryor5-49/+230
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14More localized sourcingJim Pryor2-23/+12
When we're sourcing a profile just to obtain a single variable, use the form: INTERFACE=$(. "$DIR/$profile"; echo "$INTERFACE") This makes it clearer in the source what we're expecting to obtain from the profile, and what we're ignoring. Also allows us to eliminate some more inclusive subshells. Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14src/network tweaksJim Pryor1-21/+37
* changed some report_fails that were called without any preceding report_try --> report_err * deploy new check_iface functionality to profile_up and profile_down and interface_down * have profile_up/down report_debug the results of check_iface * the call to interface_down doesn't need to be sandboxed; all the profile sourcing functions it calls as subroutines do their own sandboxing. Don't they? * added missing INTERFACE="$1" to check_iface * tweaks to bring_interface Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14Consolidate check_iface and get_iface_profJim Pryor1-25/+13
1. Change the behavior of check_iface to match that of get_iface_prof (that is, echo either "external" or the profile name, and return 0=true, or echo nothing and return 1=false). 2. Then eliminate get_iface_prof. Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14load hooks only from /usr/lib/network/hooksJim Pryor2-11/+5
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14revert regexp ESSID patchesJim Pryor5-39/+21
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14/sys/class/rfkill/rfkillN/state=2 for disabled on my systemJim Pryor1-1/+1
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14remove duplicated list_networksJim Pryor1-40/+0
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14Returns and exitsJim Pryor5-11/+19
* add some abortive returns * some exit tweaks Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14Sourcing not necessary in get_rf_state, set_rf_stateJim Pryor1-4/+1
Every time these functions are called, the sourcing has already just been done by the caller. Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14check for $IFACE_DIR/$INTERFACE before sourcingJim Pryor2-3/+3
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14tabs->spaces, vim modelinesJim Pryor15-225/+230
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-14Tweaks while mergingJim Pryor7-42/+44
* added various quotes * made some vars local * tweaked some [[ ]]s, including one broken one in netcfg-menu * s/ra0/$INTERFACE/ in ethernet-iproute and wireless Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07Rework rfkill into re-usable functionsJames Rayner4-76/+82
2009-09-07Generalise wpa_supplicant scan informationJames Rayner1-7/+51
2009-09-07Added initial rfkill supportJames Rayner3-33/+79
Added some extra debug points Directed debug out to stderr, as debug messages were being used as output from find_essid.
2009-09-07at_interface_{up,down} => IFACE_{UP,DOWN}Jim Pryor2-36/+31
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07Read /etc/network.d/interfaces/ when loading profileJames Rayner2-10/+9
* profile is sourced again after doing so, so profile-level assignments can override * folded validate_profile into load_profile: the extra source command in load_profile was redundant, so all that load_profile effectively did was just call validate_profile
2009-09-07indentationJim Pryor1-17/+17
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07quotes around $(...) where neededJim Pryor5-6/+6
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07Replace pipe to xargs with pipe to while read...Jim Pryor1-1/+3
Was trying to fix an issue with /etc/rc.d/functions. Ended up fixing the issue in initscripts instead. But this is a bit simpler for netcfg anyway. Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07typo in a commentJim Pryor1-1/+1
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07move checkyesno to globals, make NETCFG_DEBUG a yes/no setting (default=no)Jim Pryor3-32/+36
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07add an improved pm-utils handlerJames Rayner1-0/+44
2009-09-07Comments, more harmless bitsJim Pryor4-11/+20
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07long switches when calling netcfgJim Pryor1-2/+2
Also, the code seems mostly to use /usr/bin/netcfg2 rather than /usr/bin/netcfg. So I've made it do that consistently (I think, in earlier commits). Is this your intent? Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07Lots of little tweaks that should never hurt. Some of them may help inJames Rayner9-51/+59
corner cases; others probably make no difference. Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07respect TMPDIRJim Pryor3-9/+9
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07wireless-dbus tweaksJim Pryor1-2/+2
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07i/o tweaksJim Pryor3-5/+10
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-09-07Use wpa_supplicant for list_networksJames Rayner2-29/+21
2009-09-02Shorten find_ap/essid and allow net-profiles to continue if a profile failsJames Rayner2-3/+2
2009-08-17prevent check_iface from always returning external, output from get_iface_profJames Rayner1-4/+4
2009-08-15quotes!Jim Pryor13-115/+114
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-08-15extend set_interface usage to netcfg-auto-wirelessJim Pryor1-3/+6
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-08-15Isolate ip to ethernet-iproute, ifconfig to ethernet + wirelessJim Pryor3-16/+27
* The point of having both ethernet and ethernet-iproute was presumably to transition slowly from ifconfig/net-tools to iproute2. But the current codebase mixes the two in handling ethernet and wireless connections. This commit separates all the ip calls to the newer connections, and the ifconfig calls to the older connections. The latter now call set_interface with up-old, down-old, forcedown-old. * I'm not urging that ifconfig code sticks around. Just trying to make the code consistent with what seems to me to be its implicit design principles. * the check for NO-CARRIER in ethernet is now also done without calling iproute2 tools. I saw this technique recommended somewhere but have no citation. I don't know how many kernel revisions one can rely on any given part of /sys to remain stable for. It may be possible to achieve the same goal here in other ways. If in fact it's worth the effort to keep the ifconfig code around. * Began also to integrate the IPROUTE variable introduced in ethernet, but stopped. If that's integrated everywhere, shouldn't it make connection=ethernet equivalent to connection=ethernet-iproute? Is there justification for using it at some places but not everywhere? I just let it alone for now. Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-08-15start consolidation of ifconfig/ip/set_interfaceJim Pryor4-20/+42
* try to factor all the ifconfig/ip set dev code to single location (currently networks/set_interface, though I recommend a different name for this function because it's too close in name and different in functionality from set_iface, set_profile). * added "forcedown" option to set_interface, meaning "just go down don't worry about 'nodown' quirks" * even with "forcedown", this factoring would introduce "ip addr flush dev $INTERFACE" calls to existing code. I assume that's harmless? or even beneficial? * one code block (in ethernet_iproute) had stdout,stderr of the down calls redirected to /dev/null. I've moved that to set_interface, so now everyone's getting that behavior. I assume that's appropriate... * now no more calls to "ip" or "ifconfig" outside of set_interface, except the checks for NO-CARRIER after ethernet*/set_interface up. They might also be moved to network/set_interface? * as of this commit, all the set_interface calls are now using ip instead of ifconfig. A subsequent commit will isolate the ip-use to ethernet-iproute and the ifconfig-use to ethernet. * ALERT: attend to wireless_down, it seems to be calling set_interface down twice (once in ethernet_down, once in itself). And neither this commit nor the code it's patching respects quirk nodown in the ethernet_down block. Signed-off-by: Jim Pryor <profjim@jimpryor.net>
2009-08-15Improve suspend/resume, allow for subsets of ifacesJim Pryor1-16/+35
Signed-off-by: Jim Pryor <profjim@jimpryor.net>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-16 16:57:59 +0100