Remove unneeded F77 and GCJ libtool macros from acinclude.m4

We don't use Fortran or Java code in our project, so no need to waste time
looking for this stuff. This gives a noticeable speedup to running the
./configure program as well.

Signed-off-by: Dan McGee <dan@archlinux.org>

1 files changed, 0 insertions, 267 deletions

diff --git a/acinclude.m4 b/acinclude.m4
index b9a77cd4..3bcadb8d 100644
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -30,28 +30,6 @@ dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
     [AC_LIBTOOL_CXX],
     [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
   ])])
-dnl And a similar setup for Fortran 77 support
-  AC_PROVIDE_IFELSE([AC_PROG_F77],
-    [AC_LIBTOOL_F77],
-    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-	     [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
 ])])# AC_PROG_LIBTOOL
 
 
@@ -60,8 +38,6 @@ dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
 AC_DEFUN([_AC_PROG_LIBTOOL],
 [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
 AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
 
 # This can be used to rebuild libtool when needed
 LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
@@ -1880,22 +1856,6 @@ if test -f "$ltmain" && test -n "$tagnames"; then
 	fi
 	;;
 
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-	  AC_LIBTOOL_LANG_F77_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-	  AC_LIBTOOL_LANG_GCJ_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
       RC)
 	AC_LIBTOOL_LANG_RC_CONFIG
 	;;
@@ -2645,43 +2605,6 @@ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
 fi
 ])# _LT_AC_PROG_CXXCPP
 
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
 # AC_LIBTOOL_RC
 # -------------
 # enable support for Windows resource files
@@ -3830,22 +3753,6 @@ private:
   int a;
 };
 EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-EOF
 ])
 dnl Parse the compiler output and extract the necessary
 dnl objects, libraries and library flags.
@@ -3998,174 +3905,6 @@ case " $_LT_AC_TAGVAR(postdeps, $1) " in
 esac
 ])# AC_LIBTOOL_POSTDEP_PREDEP
 
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
-      program t
-      end
-"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
 
 # AC_LIBTOOL_LANG_RC_CONFIG
 # -------------------------
@@ -6485,12 +6224,6 @@ AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
 # This is just to silence aclocal about the macro not being used
 ifelse([AC_DISABLE_FAST_INSTALL])
 
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
 AC_DEFUN([LT_AC_PROG_RC],
 [AC_CHECK_TOOL(RC, windres, no)
 ])