summaryrefslogtreecommitdiffstats
path: root/doc/pacman.8.txt
diff options
context:
space:
mode:
Diffstat (limited to 'doc/pacman.8.txt')
-rw-r--r--doc/pacman.8.txt110
1 files changed, 52 insertions, 58 deletions
diff --git a/doc/pacman.8.txt b/doc/pacman.8.txt
index 4bdb3f95..9f540df1 100644
--- a/doc/pacman.8.txt
+++ b/doc/pacman.8.txt
@@ -107,35 +107,12 @@ version comparison and force an upgrade.
Options
-------
-*\--asdeps*::
- Install packages non-explicitly; in other words, fake their install reason
- to be installed as a dependency. This is useful for makepkg and other
- build from source tools that need to install dependencies before building
- the package.
-
-*\--asexplicit*::
- Install packages explicitly; in other words, fake their install reason to
- be explicitly installed. This is useful if you want to mark a dependency
- as explicitly installed so it will not be removed by the '\--recursive'
- remove operation.
-
*-b, \--dbpath* <'path'>::
Specify an alternative database location (a typical default is
``{localstatedir}/lib/pacman''). This should not be used unless you know what you are
doing. *NOTE*: if specified, this is an absolute path and the root path is
not automatically prepended.
-*-d, \--nodeps*::
- Skips all dependency checks. Normally, pacman will always check a
- package's dependency fields to ensure that all dependencies are
- installed and there are no package conflicts in the system.
-
-*-f, \--force*::
- Bypass file conflict checks and overwrite conflicting files. If the
- package that is about to be installed contains files that are already
- installed, this option will cause all those files to be overwritten.
- This option should be used with care, ideally not at all.
-
*-r, \--root* <'path'>::
Specify an alternative installation root (default is ``/''). This should
not be used as a way to install software into ``/usr/local'' instead of
@@ -148,9 +125,8 @@ Options
*-v, \--verbose*::
Output paths such as as the Root, Conf File, DB Path, Cache Dirs, etc.
-*\--debug*::
- Display debug messages. When reporting bugs, this option is recommended
- to be used.
+*\--arch* <'arch'>::
+ Specify an alternate architecture.
*\--cachedir* <'dir'>::
Specify an alternative package cache location (a typical default is
@@ -161,15 +137,9 @@ Options
*\--config* <'file'>::
Specify an alternate configuration file.
-*\--ignore* <'package'>::
- Directs pacman to ignore upgrades of package even if there is one
- available. Multiple packages can be specified by separating them
- with a comma.
-
-*\--ignoregroup* <'group'>::
- Directs pacman to ignore upgrades of all packages in 'group' even if
- there is one available. Multiple groups can be specified by
- separating them with a comma.
+*\--debug*::
+ Display debug messages. When reporting bugs, this option is recommended
+ to be used.
*\--logfile* <'file'>::
Specify an alternate log file. This is an absolute path, regardless of
@@ -179,6 +149,18 @@ Options
Bypass any and all ``Are you sure?'' messages. It's not a good idea to do
this unless you want to run pacman from a script.
+Transaction Options (apply to '-S', '-R' and '-U')
+--------------------------------------------------
+*-d, \--nodeps*::
+ Skips all dependency checks. Normally, pacman will always check a
+ package's dependency fields to ensure that all dependencies are
+ installed and there are no package conflicts in the system.
+
+*-k, \--dbonly*::
+ Adds/Removes the database entry only, leaves all files in place.
+ On an upgrade operation, the existing package and all files
+ will be removed and the database entry for the new package will be added.
+
*\--noprogressbar*::
Do not show a progress bar when downloading files. This can be useful
for scripts that call pacman and capture the output.
@@ -187,19 +169,46 @@ Options
If an install scriptlet exists, do not execute it. Do not use this
unless you know what you are doing.
-*\--arch* <'arch'>::
- Specify an alternate architecture.
-
*-p, \--print*::
Only print the targets instead of performing the actual operation (sync,
- remove or upgrade). Use '\--print-format' to specify how targets are
- displayed. The default format string is "%l", which displays url with '-S',
- filename with '-U' and pkgname-pkgver with '-R'.
+ remove or upgrade). Use '\--print-format' to specify how targets are
+ displayed. The default format string is "%l", which displays url with
+ '-S', filename with '-U' and pkgname-pkgver with '-R'.
*\--print-format* <'format'>::
Specify a printf-like format to control the output of the '\--print'
- operation. The possible are attributes are : %n for pkgname, %v for pkgver, %l
- for location, %r for repo and %s for size.
+ operation. The possible are attributes are : %n for pkgname, %v for pkgver,
+ %l for location, %r for repo and %s for size.
+
+Upgrade Options (apply to 'S' and 'U')[[UO]]
+--------------------------------------------
+*-f, \--force*::
+ Bypass file conflict checks and overwrite conflicting files. If the
+ package that is about to be installed contains files that are already
+ installed, this option will cause all those files to be overwritten.
+ This option should be used with care, ideally not at all.
+
+*\--asdeps*::
+ Install packages non-explicitly; in other words, fake their install reason
+ to be installed as a dependency. This is useful for makepkg and other
+ build from source tools that need to install dependencies before building
+ the package.
+
+*\--asexplicit*::
+ Install packages explicitly; in other words, fake their install reason to
+ be explicitly installed. This is useful if you want to mark a dependency
+ as explicitly installed so it will not be removed by the '\--recursive'
+ remove operation.
+
+*\--ignore* <'package'>::
+ Directs pacman to ignore upgrades of package even if there is one
+ available. Multiple packages can be specified by separating them
+ with a comma.
+
+*\--ignoregroup* <'group'>::
+ Directs pacman to ignore upgrades of all packages in 'group' even if
+ there is one available. Multiple groups can be specified by
+ separating them with a comma.
Query Options[[QO]]
-------------------
@@ -287,9 +296,6 @@ Remove Options[[RO]]
or more target packages. This operation is recursive, and must be used
with care since it can remove many potentially needed packages.
-*-k, \--dbonly*::
- Removes the database entry only. Leaves all files in place.
-
*-n, \--nosave*::
Instructs pacman to ignore file backup designations. Normally, when a
file is removed from the system the database is checked to see if the
@@ -334,10 +340,6 @@ linkman:pacman.conf[5].
or '-i' flags will also display those packages in all repositories that
depend on this package.
-*-k, \--dbonly*::
- Adds the database entries for the specified packages but does not install any
- of the files.
-
*-l, \--list*::
List all packages in the specified repositories. Multiple repositories
can be specified on the command line.
@@ -383,14 +385,6 @@ linkman:pacman.conf[5].
Don't reinstall the targets that are already up-to-date.
-Upgrade Options[[UO]]
---------------------
-*-k, \--dbonly*::
- Adds the database entries for the specified packages but does not install any
- of the files. On an upgrade operation, the existing package and all files
- will be removed and the database entry for the new package will be added.
-
-
Handling Config Files[[HCF]]
----------------------------
Pacman uses the same logic as rpm to determine action against files that are