summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-10-20libalpm: process needed before group selectionmorganamilo1-0/+11
When --needed is used, up to date packages are now filtered out before showing the group select. Fixes FS#22870. Signed-off-by: morganamilo <morganamilo@gmail.com>
2018-10-20pacman: don't error when a group exists but all packages are ignoredmorganamilo1-0/+18
Currently when attempting to sync a group where all packages are ignored, either by ignorepkg, ignoregroup or --needed, pacman will error with "target not found". Instead, if a group has no packages check if the group exists before throwing an error. Signed-off-by: morganamilo <morganamilo@gmail.com>
2018-10-19Port pactest to python3Dave Reisner5-9/+10
Use BytesIO instead of StringIO, and ensure that we unicode-encode data where needed.
2018-10-18alpm: Fix SIGINT handling re: aborting downloadOlivier Brunel1-0/+1
Upon receiving SIGINT a flag is set to abort the (curl) download. However, since it was never reset/initialized, if a front-end doesn't actually exit on SIGINT, and later tries any operation that needs to perform a new download, said download would always get aborted right away due to the flag not having been reset.
2018-10-18alpm: Do not raise SIGINT when filesize goes over limitOlivier Brunel1-1/+1
Variable dload_interrupted is used both to abort a download because SIGINT was caught, and when a file limit is reached. But raising SIGINT is only meant to happen in the first case. Signed-off-by: Olivier Brunel <jjk@jjacky.com>
2018-09-19repo-add: add support for the zst formatEli Schwartz1-0/+1
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19makepkg: add support for the zst formatEli Schwartz3-1/+4
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19makepkg: lint_pkgver: Run even if PKGVERFUNCLuke Shumaker1-5/+0
lint_pkgver returns 0 if PKGVERFUNC, since it's likely that update_pkgver() will change the value of pkgver anyway, and there's no point in linting the old value. update_pkgver() will call check_pkgver() itself to validate the new value. However, that "optimization" only holds if we're definitely going to call update_pkgver() later; and that's way more complicated than if (( PKGVERFUNC )); then it's more like: if (( !GENINTEG && !PACKAGELIST && !PRINTSRCINFO && !SOURCEONLY && !REPKG && PKGVERFUNC )); then Which is to say: If I have a PKGBUILD with pkgver(): * if I run `makepkg -g` I expect it to lint pkgver, but it won't * if I run `makepkg -R` I expect it to lint pkgver, but it won't * ... So let's fix that. Rather than try to keep a huge list of conditions in sync with the flow of makepkg.sh.in, let's just drop it. As far as I can tell, the only thing that skipping lint_pkgver() really enables is letting the PKGBUILD author write `pkgver=` in the initial version, and letting pkgver() fill it in. They can just start writing `pkgver=0` for that workflow. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19User-visible log when validity check fails due to accessDavid Phillips1-0/+5
Currently, if checking the validity of packages fails due to an access error on one or more packages, the user must sift through debug output in order to find the culprit package(s). This patch adds a call to _alpm_log in such a case to make the culprits more easily visible. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19Change if-else chain to switchDavid Phillips1-11/+17
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19makepkg: reject PKGBUILDs with both split and non-split package functionsEli Schwartz1-1/+8
We accept package_foo() in non-split packages, because it's easier to switch to/from a split package just by removing a pkgname element. But it makes no sense to have both in one PKGBUILD. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19Show group status during file searchmorganamilo3-15/+22
When doing "pacman -Fs", show the "(groupname)" message just like "pacman -Ss". And refactor group printing to its own function. Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19libmakepkg/lint_config: fix lint_variable actually running the PKGBUILD lintEli Schwartz1-2/+2
Due to a copy-paste error when initially implementing this, it actually uses a duplicate function name, usually resulting in lint_pkgbuild overwriting the function definition. Then the PKGBUILD lint gets run twice, one time before the PKGBUILD is even sourced -- to potentially surprising results, like erroring out on a pre-existing shell definition that doesn't match our expectations. Seen in the wild with lint_config triggering an error for 'declare -x arch="foo"' Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19pacman: check versioned optdepends in -Qi operationEli Schwartz1-1/+1
Fixes FS#60106 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-18doc: Remove double spacesRikard Falkeborn2-2/+2
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-18scripts: deduplicate localized copyright messagesEli Schwartz5-6/+11
We don't need to translate the "Copyright YEAR AUTHOR" part, no part of it should probably be translated and it definitely shouldn't turn every single license terms notice into a separate translation just because the author/year is different. Fixes FS#58452 Also consistently add a blank line after the copyright and before the license terms. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-18Revert "makepkg: add whirlpool to the list of hashing algorithms"Eli Schwartz1-1/+1
This reverts commit 9cdfd18739cc4b0e2b2efeb9a92a3ea612c8505f. We've never documented whirlpoolsums support in the manpage and no one really seems to have realized we support it, let alone use it -- except for a few parabola packages, being the contributor's motivation for adding support. The problem is that for two years the code has been broken. In commit 577701250d645d1fc1a505cde34aedbeb3208ea5 we moved to coreutils to provide checksum commands, rather than openssl, but there is no whirlpoolsums binary. Properly fixing this would require re-adding a dependency on openssl, independent of the libalpm crypto backend -- which defeats the purpose of moving to coreutils in the general case. nettle-hash does not provide a whirlpool algorithm any more than it does base64 (the original reason for moving to coreutils). Therefore, we should just drop support for this again. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-18pacman-conf: add missing DisableDownloadTimeoutmorganamilo1-0/+3
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29makepkg: don't print status for run_function when in a subshellEli Schwartz1-1/+4
It's most likely a case where output is being captured, so we shouldn't be interleaving status messages with function output regardless. Setting the pkgver() status message (the one time we use it in a subshell) separately also makes it safe to change whether message.sh functions write to stdout or stderr. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29makepkg: fix pkgver() function not aborting on errorsEli Schwartz1-0/+3
`run_function_safe pkgver` is evaluated in a subshell and therefore does not abort when it should. Explicitly check the return outside of the subshell and abort if necessary. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29makepkg: don't save the same shopts twiceEli Schwartz1-5/+0
Both run_function and run_function_safe will save and restore `shopt -p` but the former is only called from the latter. It makes sense to save this as part of a "safe" runner, so let's just do it in one place, there where we save and restore everything else too. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29Show install status during file searchmorganamilo1-1/+5
When doing "pacman -Fs", show the "[installed: version]" message just like "pacman -Ss". Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29pacman/conf: Remove unused includeDave Reisner1-1/+0
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29doc: use more implicit rules to build manpagesDave Reisner1-22/+12
Use implicit dependency rules to translate asciidoc inputs to HTML and manpage outputs. We should only have to declare explicit dependencies for odd cases, e.g. the PKGBUILD documentation has an additional include file and isn't a 1:1 conversion. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29Remove unused checks for strcoll and mktimeDave Reisner1-2/+0
We don't use these. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29common/ini: Depend on util-common, not utilDave Reisner1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10scripts: pass on options such as set -x to child processesEli Schwartz2-2/+2
When re-running makepkg for fakeroot, if `bash -x makepkg` was used this is lost. Fix by encoding the current set of options explicitly in the invocation, both for makepkg and for the wrapper used to test scripts inside the source tree. Also change to use ${BASH_SOURCE[0]} instead of $0 as the latter can be anything the parent process wants, while the former is explicitly set by bash itself to the filepath of the script. See http://mywiki.wooledge.org/BashFAQ/028 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10Remove the last traces of the pacman --force optionAllan McRae10-114/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10scripts: Remove trailing semicolonsJan Alexander Steffens (heftig)7-18/+18
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libmakepkg/util/option: Refactor checking to reduce code duplicationJan Alexander Steffens (heftig)1-53/+24
Pull out the expected=y/n check into a separate function and make use of the fact we can just prepend the fallback arrays to get the same result. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libmakepkg/util: use parameter transformation when checking variable typeEli Schwartz1-1/+1
Now that we require bash 4.4 this is "more correct" than analyzing the output of declare -p to see if it compares favorably with -a. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10configure: bump the minimum version of bash to 4.4Eli Schwartz1-3/+3
This is required in order to use declare -g and ${var@a} Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10makepkg: when signing packages, report package filename on failureEli Schwartz1-1/+1
In commit c6b04c04653ba9933fe978829148312e412a9ea7 the signing function was moved out of fakeroot, and thus out of the create_package loop. This meant that if package signing failed, it was no longer possible to tell which package it failed on by checking which package creation is currently running. Successful signing attempts do not have this problem as we already printed the name of the signature file. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libalpm/dload.c: add case for CURLE_COULDNT_RESOLVE_HOSTMichael Straube1-0/+7
Add a case for curl error 'Could not resolve host'. An attempt to fix FS#48285. Signed-off-by: Michael Straube <straubem@gmx.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libalpm: ignore .hook suffix when sorting hooksJouke Witteveen2-4/+14
It is desirable to have 'a-post.hook' ordered after 'a.hook'. For this, it is needed to ignore the suffix when sorting. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libmakepkg: add pkgbase to linted variablesmorganamilo1-1/+1
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10makepkg: Simplify run_packageJan Alexander Steffens (heftig)1-8/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10makepkg: Simplify SPLITPKG checkJan Alexander Steffens (heftig)1-3/+1
This causes package_$pkgname() to be preferred over package() in the non-split case, but the behavior if both functions exist was undocumented anyway. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10Add lz4 compression support to makepkgAlex Butler3-1/+4
Adds opt-in lz4 compression of *pkg.tar files with makepkg. This is nice to have as an option for very fast compression and is already installed with libarchive. Signed-off-by: Alex Butler<alexheretic@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10scripts/completion: derive the bash completion directory from pkg-configEli Schwartz2-3/+11
Default to the standard completionsdir, which is lazy-loaded, rather than hardcoding the compatdir which is not. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27Release v5.1.1v5.1.1Allan McRae3-2/+22
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27makepkg: optimize and fix BUILDINFO generation's use of awkEli Schwartz1-6/+4
The biggest issue is directly supplying the data within the format string which can result in misinterpreting formatter sequences if a printed variable contains an "%" in it. This character is currently permitted in the pkgver field, though not in the pkgname. Also pacman/libalpm itself has much looser limitations and this can appear anywhere at all if a package was created by some other program. For the package "iambroke-1%s-1-any.pkg.tar.xz", installed in the build environment, the result is: -> Generating .BUILDINFO file... awk: cmd. line:3: (FILENAME=- FNR=1085) fatal: not enough arguments to satisfy format string `-1%s-1' ^ ran out for this one Followed by a .BUILDINFO which contains an LC_ALL=C sorted list of $pkgname-${epoch:+$epoch:}$pkgver-$pkgrel-$arch ending in: installed = iambroke Which is cut short, then fails to list the succeeding packages. The package itself successfully builds. It's also unnecessary to save the output of pacman -Qq in order to get the information for pacman -Qi, since the latter will, just like the former, return information for all installed packages if not given a package name(s). While I am at it, pipe this directly to awk rather than keeping a copy in an unnecessary local variable. This is slightly more efficient in addition to preventing the <<< herestring from re-interpreting the content of "$pkginfos" in ways that don't really matter for our usage. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27alpm-hooks.5: include more information on hook filesJouke Witteveen1-2/+6
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27Pull updated translations from TransifexAllan McRae88-6836/+6884
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27Handle root prefix in overwrite operationsAllan McRae1-4/+5
The pacman --overwrite operation currently expects a path without the root prefix specified. This is unexpected, particularly given our conflict error message reports the path with the root prefix included. This patch allows libalpm to overwrite files with the root prefix specified. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27makepkg: reduce strictness of pkgver in depends lintingEli Schwartz1-1/+2
This change was introduced to prevent entries like depends=('foo>'). However, it had the unintended side effect of causing a number of working PKGBUILDs to fail to build. This happened when a PKGBUILD defined one variable through calling a "complex" statement within the PKGBUILD's package function (e.g. a function or evaluating in a subshell), then used it to define the package metadata variable. extract_function_variable() cannot execute the package function in order to retrieve this information, so it performs a simple grep + eval instead and in the process misses the contextual awareness of running within the package function. While not catching these "issues" can result in incorrect SRCINFO, the resulting packages are fine. Stop aborting on the common case where the pkgver of a dependency is dynamically set during the package function until the large number of broken PKGBUILDs are fixed, and the restrictions of the PKGBUILD format are documented. "Fixes" FS#58776 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27makepkg.conf: add missing sha224 sumsMichael Straube2-2/+2
Add missing sha224 sums to makepkg.conf and it's man page. Signed-off-by: Michael Straube <michael.straube@posteo.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-25doc: declare what type of comments we support in pacman.confEli Schwartz1-0/+3
Ini-style configuration formats are all over the place. So are we, for that matter, as we switched how we treated middle-of-line comments in commit 8a19c4a78251c5e34ecf508a65d943ca2dc833c7 -- namely, they're not comments anymore. This is surprising to users, who report bugs because it used to work, but what's more surprising is that the only "documentation" for the type of comments users can be expected to use, is by guessing from our example pacman.conf and maybe discovering unreliable easter eggs. Fixes FS#58809 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-25Revert "Deprecate --root in favour of --sysroot"Allan McRae2-2/+11
The use of --sysroot in the real world has flagged some issues that need addressing. Undeprecate --root for now. This reverts commit a278356f75866f89232e3e6230bbf9fb2dc1893c. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-19libmakepkg: remove accidentally added fileAllan McRae1-0/+0
A blank file slipped into libmakepkg in commit 2c94118d. Signed-off-by: Allan McRae <allan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-12-27 14:02:46 +0100