summaryrefslogtreecommitdiffstats
path: root/src/pacman/conf.h
AgeCommit message (Collapse)AuthorFilesLines
2011-08-11pacman: remove --dbonly shortoptDave Reisner1-1/+2
This is somewhat of a dangerous option with limited use cases. Don't advertise it as an easily accessibly option. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11Add -S --recursive operationDan McGee1-1/+2
This closely matches what we had before for -R --recursive. Basically, when specifying a target (e.g., pacman), we can now recursively pull all dependencies, regardless of version specifiers and whether they are already satisfied in the local database. This could be used to update pacman on a system with an old glibc, for example, as both pacman and glibc would get pulled into the transaction. This is most useful with --needed to prevent needless reinstalls as described in the man page changes. The end goal of this change is to wire it into SyncFirst and have it be the default mode of operation there, but that belongs in a separate changeset. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-05signing: move to new signing verification and return schemeDan McGee1-1/+1
This gives us more granularity than the former Never/Optional/Always trifecta. The frontend still uses these values temporarily but that will be changed in a future patch. * Use 'siglevel' consistenly in method names, 'level' as variable name * The level becomes an enum bitmask value for flexibility * Signature check methods now return a array of status codes rather than a simple integer success/failure value. This allows callers to determine whether things such as an unknown signature are valid. * Specific signature error codes mostly disappear in favor of the above returned status code; pm_errno is now set only to PKG_INVALID_SIG or DB_INVALID_SIG as appropriate. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-28Rename pmtransflag_t to alpm_transflag_tAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmhandle_t to alpm_handle_tAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-07Revamp pacman setup code to handle new alpm initialize routineDan McGee1-2/+14
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-05-05Move parseconfig to conf.cDan McGee1-0/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-21New VerbosePkgLists optionJakob Gruber1-2/+6
If enabled, displays package lists for upgrade, sync and remove operations formatted as a table. Falls back to default list display if insufficient terminal columns are available. Example output: :: Starting full system upgrade... :: Replace libjpeg with testing/libjpeg-turbo? [Y/n] resolving dependencies... looking for inter-conflicts... Remove (1): Name Old Version Size libjpeg 8.3.0-1 0.83 MB Total Removed Size: 0.83 MB Targets (5): Name Old Version New Version Size libjpeg-turbo 1.1.0-1 0.20 MB linux-firmware 20110201-1 20110227-1 8.23 MB ncurses 5.7-4 5.8-1 0.92 MB ppl 0.11.1-1 0.11.2-1 2.74 MB v4l-utils 0.8.1-1 0.8.3-1 0.23 MB Total Download Size: 12.32 MB Total Installed Size: 58.82 MB Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-21Remove ShowSize optionJakob Gruber1-1/+0
Dan: The commit message originally referenced "VerbosePkgLists", but I'm going to change the name of the option. In addition, this patch serves a purpose being standalone- we should really do things like this with -S --print and hopefully -Q --print in the future. Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23Let pacman specify GnuPG's home directory.Chris Brannon1-1/+3
GnuPG looks for configuration files and keyrings in its home directory. For a user, that is typically ~/.gnupg. This patch causes pacman to use /etc/pacman.d/gnupg/ as the default GnuPG home. One may override the default using --gpgdir on the command-line or GPGDir in pacman's configuration file. Signed-off-by: Chris Brannon <cmbrannon@cox.net> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Allow both cleanmethod values to be specified at the same timeDan McGee1-2/+2
No reason to disallow this- it allows keeping even more packages around in the cache. Test cases included for this case and to ensure the default behavior is preserved. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Update copyright years for 2011Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05Introduce -D, --databaseNagy Gabor1-1/+2
The request of FS#12950 is implemented. On the backend side, I introduced a new function, alpm_db_set_pkgreason(), to modify the install reason of a package in the local database. On the front-end side, I introduced a new main operation, -D/--database, which has two options, --asdeps and --asexplicit. I documented this in pacman manual. I've created two pactests to test -D: database001.py and database002.py. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15Bump copyright dates to 2010Dan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15Add new --print operation for all operationsXavier Chantry1-2/+4
And a new --print-format option to configure the output. This implements FS#14208 Example usage : pacman -Sp --print-format "%r/%n-%v : %l [%s]" kdelibs extra/kdelibs-4.3.2-4 : ftp://mir2.archlinuxfr.org/archlinux/extra/os/i686/kdelibs-4.3.2-4-i686.pkg.tar.gz [0,00] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-13Replace hardcoded option numbers with enumerationLaszlo Papp1-0/+18
Pacman's long option parsing used hardcoded numbers to identify them. This is not good practice, so replace them with enumeration constants. Signed-off-by: Laszlo Papp <djszapi@archlinux.us> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-09Re-add the non-user friendly --ask optionXavier Chantry1-0/+2
This re-implements the --ask option which was removed in commit 1ff8e7f364a9f640ada7526384646d510ac29967. This option does not have to be exposed to the user (help,doc,etc), but is very very useful for pactest if we want to have more coverage there. This was rewritten in a smarter way, without code duplication. And with a different behavior : this option is now only used to inverse default behavior to questions. We still use bit operations based on the following struct : /* Transaction Conversations (ie, questions) */ typedef enum _pmtransconv_t { PM_TRANS_CONV_INSTALL_IGNOREPKG = 0x01, PM_TRANS_CONV_REPLACE_PKG = 0x02, PM_TRANS_CONV_CONFLICT_PKG = 0x04, PM_TRANS_CONV_CORRUPTED_PKG = 0x08, PM_TRANS_CONV_LOCAL_NEWER = 0x10, PM_TRANS_CONV_REMOVE_PKGS = 0x20, } pmtransconv_t; for each conv matched, the default answer is inversed. --ask 0 : all default answers are preserved --ask 4 : only conflict question is inversed --ask 63 : all questions are inversed (63 == 1+2+4+8+16+32) Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-23Add a fetch callback to allow front-end download supportSebastian Nowicki1-0/+1
This allows a frontend to define its own download algorithm so that the libfetch dependency can be omitted without using an external process. The callback will be used when if it is defined, otherwise the old behavior applies. Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> [Dan: minor cleanups] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-23New feature: files verificationDan McGee1-0/+1
This implements FS#13877. Add a new option "-Qk" which checks if all of the files for a given package (or packages) are really on the system (i.e. not accidentally deleted). This can be combined with filters and other display options. It also respects both the --quiet and --verbose flags to give varying levels of output. Based on the original patch by Charly Coste <changaco@laposte.net>, thanks for your work! Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-01Update copyright headers and messagesDan McGee1-1/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-13HoldPkg reworkNagy Gabor1-0/+1
The HoldPkg feature is even more important when the packages to be held are pulled automatically by pacman, in a -Rc and -Rs operation. Before, it only applied when the packages were explicitly requested by the user to be removed. This patch extends holdpkg to -Rc and -Rs by doing the HoldPkg check just before trans_commit. Additionally, the whole HoldPkg stuff was moved to the front-end. I changed the default behavior to "don't remove", so I modified remove030.py pactest as well. See also: FS#9173. Original-work-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Move -Sp implementation to the front-endNagy Gabor1-0/+1
This patch kills one of our hackish pseudo transactions: PRINTURIS. (The other one is -Sw) From now on, front-end must not call trans_commit in case of -Sp, it should print the uris of target packages "by hand" instead. PRINTURIS flag was removed, NOCONFLICTS flag can be passed to skip conflict checks. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-30Remove UseColor from front-endNagy Gabor1-1/+0
This option wasn't used. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-13Add SyncFirst option.Chantry Xavier1-0/+1
This patch offers a way to fix FS#9228. By putting "SyncFirst = pacman" in pacman.conf, the version check will happen before the transaction really starts, and before any replacements is made. Otherwise, no version check is done. The sync301 pactest was updated to use this SyncFirst option. Example session with SyncFirst = pacman, and a newer pacman version available : $ pacman -Su (or pacman -S <any targets>) :: the following packages should be upgraded first : pacman :: Do you want to cancel the current operation :: and upgrade these packages now? [Y/n] resolving dependencies... looking for inter-conflicts... Targets: pacman-x.y.z-t Total Download Size: x.xx MB Total Installed Size: x.xx MB Proceed with installation? [Y/n] n As Nagy previously noted, doing this check on any -S operations might look intrusive, but it can be required. For example, the case where you want to install a package with versioned provisions, using a pacman version which didn't support that feature yet (and there is already a newer pacman in sync db supporting it). Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-23Add new CleanMethod option.Chantry Xavier1-3/+10
As it was already mentioned several times, the new -Sc behavior in 3.1 is great, but only when the package cache is not shared. This option has two possible values : KeepInstalled and KeepCurrent With KeepCurrent, -Sc will clean packages that are no longer available in any sync db, rather than packages that are no longer in the local db. The resulting behavior should be better for shared cache. Ref : http://www.archlinux.org/pipermail/pacman-dev/2008-February/011140.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-22Kill the dependsonly option.Chantry Xavier1-1/+0
From the man page : "This is pretty useless and we're not sure why it even exists." Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-03-08Remove frontend add code that is no longer necessaryDan McGee1-1/+0
Change the pacman_upgrade stub function to do what pacman_add used to do so we can eliminate pacman_add. Move the code to the more-descriptive name of upgrade.c. Note that we have made no changes to the backend libalpm, where an ADD type transaction could still be supported. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-08Remove the Add option from the command lineDan McGee1-1/+0
There is still a lot of code that could be cleaned up internally. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-11Rename -t --orphans to -t --unrequired (FS#9144).Chantry Xavier1-1/+1
It turns out the orphan name was misleading. Real orphans are packages installed as dependency no longer required by any others (-Qtd). The -t option only shows package not required by any others, so --unrequired describes it better. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-11Update GNU GPL boilerplate and copyright datesDan McGee1-4/+2
Update the GPL boilerplate to direct people to the GNU website for a copy of the license, as well as bump all of Judd's copyrights to 2007. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-02Make pacman path handling (hopefully) a bit more intuitiveDan McGee1-5/+8
I made pacman path handling a bit odd with my rootdir changes a while back in order to increase flexability. However, it had a bit of a drawback in that dbpath/logfile/etc. would not default to being under the rootdir if that was the only parameter you specified in the config file or on the command line. (Note: logfile handling was always broken due to the explicit logfile line required in config files) Pacman now works as follows: if a rootdir is specified but not dbpath or logfile: attempt to place the logfile and dbpath in their default locations under root if an explicit dbpath/logfile is specified: interpret these as absolute paths, regardless of the rootdir setting if nothing is specified: fall back to configured defaults Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25Add -q/--quiet option for controlling output.Artyom1-0/+1
Currently this only affects -Ss, -Sl, and -Q to output less information (only package names). In the future, we can reuse this flag for other things as well. [Aaron: rewritten as a front-end flag] Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com> [Dan: squashed commits together] Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-17War on whitespaceDan McGee1-3/+3
Run the kernel's cleanfile script on all of our source files. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-11Add TotalDownload option.Nathan Jones1-0/+3
This will be used in the next commit. Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-04Clean up usage of extern variablesDan McGee1-0/+3
Instead of declaring the extern variable in every *.c file, include it in the header file that makes sense. This means handle.h for the handle, and conf.h for the pacman side config object. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-09Remove the non-user friendly --ask optionDan McGee1-2/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-17Remove the DB consistency check from pacman and libalpm.Chantry Xavier1-1/+0
This reverts commit dfc85cb5f516ffbcff557522e9703c5c7d88b047 and b6f3fe6957d0206485eac98fb2120578b75d0058. This DB check is already in testdb (among others). Also testdb now uses the db path set at make time by default, so specifying the db path is optional. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-12Make some small changes recommended by splintDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-22Post trial install changes, round oneDan McGee1-2/+7
A bunch of changes related to my first "real" install of pacman-git into /usr/local and trying to use it. * Shift some uses of free -> FREE in libalpm. * Move stat and sanity checks of config paths into libalpm from the config and argument parsing in pacman.c. * Fix issue where dbpath still was not defined early enough due to its requirement for being used in alpm_db_register. This should be rewritten so it doesn't have this dependency, but this will work for now. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-16new query options : explicit (-Qe) and deps (-Qd).Chantry Xavier1-0/+2
The t shortcut for --test was removed, the orphan option (previously -Qe) was renamed to -Qt, -Qe lists all packages installed explictly, and -Qd lists all packages installed as dependencies. Besides, t can be combined with either e or d. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-07-15Add --asdeps option to pacmanDan McGee1-1/+0
This replaces the former -D operation that was undocumented and rather hacky. It can be used with add, upgrade, or sync transactions and will affect all packages installed. Should close FS #7193. Also tell makepkg to use this new flag. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-09Implement a -Qt operation in frontend to test the databaseDan McGee1-0/+1
After adding a alpm_db_check() operation in the back end, we can call it in the front end and present a user-friendly interface to it. Inspired-by: VMiklos <vmiklos@frugalware.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-09Fix up things after the last few changesDan McGee1-0/+11
* Readd default logmask of ERROR and WARNING * Remove DOWNLOAD log level as it no longer applies * Add 'no targets' logic back in where it applies * Switch some prints in parseconfig to ERROR Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-09Add a series of pm_printf functions to pacman frontendDan McGee1-0/+3
Add pm_printf, pm_fprintf, and pm_vfprintf to the pacman frontend for use by debug printing and other output messages from pacman. These will be incorporated into the log callback functions in the next iteration of changes. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-05Move three config options out of the backendDan McGee1-0/+4
Move chomp, usecolor, and showsize out of the backend and into the pacman frontend as they are pacman-specific options and not related to the behavior of libalpm. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-01Change -z|--showsize flag to ShowSize pacman.conf optionNathan Jones1-1/+0
Also cleaned up some duplicate printf lines related to the ShowSize option. Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-05-14Display size for packagesNathan Jones1-0/+1
This patch adds a -z|--showsize option to the -Q and -S commands. The option displays the size of individual packages. This is something that I have wanted for a while, and there is a feature request for it. Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-04-25Remove more unnecessary stuffDan McGee1-2/+0
* Remove libintl.h from most files, as we only need to include it once in util.h where _() is defined. * Remove other unnecessary header inclusions. * Remove a macro that was only used once and replaced it with actual code. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-03-06* Added missing header include guards in md5.h and sha1.h.Dan McGee1-1/+1
* Some header cleanup on the pacman side of things - we had alpm.h instead alpm_list.h in a few headers. * removed an extra slash in path-building snprintf in server.c.
2007-02-12* Removed the 'vercmp' op from pacman. The standalone 'vercmp' binary should beAaron Griffin1-1/+0
used instead * Allow -T/--deptest to work without root privileges
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-06-08 18:42:37 +0200