summaryrefslogtreecommitdiffstats
path: root/src/pacman/conf.h
AgeCommit message (Collapse)AuthorFilesLines
2017-04-17add --sysroot optionAndrew Gregory1-0/+2
--root is not sufficient to properly operate on a mounted guest system. Using --root still uses the host system's configuration and there is no way to correctly use the guest configuration without manually modifying any Include directives. --sysroot provides an easier way to operate on a guest system by chrooting immediately after option parsing before configuration parsing or performing any operations. It is currently limited to the root user, but that's enough for restoring a guest system to a working state, which is the primary intended use case. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2017-04-12add --overwrite option to ignore file conflictsAndrew Gregory1-0/+2
Allows for safer, more fine-grained control for overwriting files than --force's all-or-nothing approach. Implements FS#31549. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-01-13Introduce a 'disable-download-timeout' optionChristian Hesse1-1/+3
Add command line option ('--disable-download-timeout') and config file option ('DisableDownloadTimeout') to disable defaults for low speed limit and timeout on downloads. Use this if you have issues downloading files with proxy and/or security gateway. Signed-off-by: Christian Hesse <mail@eworm.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-01-04Update copyright yearsAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-22Represent bitfields as ints, not enumsIvy Foster1-11/+13
Many bitfield variables are declared to be enums, because they are generated using bitwise operations on enums such. However, their actual values aren't necessary members of their parent enum, so declaring them 'int' is more accurate. Signed-off-by: Ivy Foster <ivy.foster@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-09-25Do not #define _RESERVED_IDENTIFIERSIvy Foster1-3/+3
Signed-off-by: Ivy Foster <ivy.foster@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-04Update copyright years for 2016Allan McRae1-1/+1
make update-copyright OLD=2015 NEW=2016 Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-03Add -F --machinereadable optionFlorian Pritz1-0/+2
Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-18pacman: add user hook directoriesAndrew Gregory1-0/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-07-15Add regex search option to sync database file searchingAllan McRae1-0/+3
e.g. pacman -Fsx kcm.*print.*\.so Signed-off-by: Allan McRae <allan@archlinux.org>
2015-07-15Prototype pacman files database operationsAllan McRae1-1/+2
Add the -F/--files operations, -s/--sync support and nd provide dummy functions for -s/--search, -l/-list and -o/--owns. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-02-01Update copyright notices for 2015Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-01-21conf.c: parse config in a single passAndrew Gregory1-0/+3
Fixes FS#28255 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2015-01-21conf.c: use masks for siglevel inheritanceAndrew Gregory1-0/+5
This will allow pacman to parse its config file in a single pass and removes the need for the *_SET siglevels in alpm that were only required for pacman's siglevel inheritance. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2015-01-21conf.c: store repo settings in dedicated structAndrew Gregory1-0/+8
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2014-10-13pacman: add --confirm optionAndrew Gregory1-0/+1
--confirm cancels the effect of a previous --noconfirm. This makes it easier for scripts to default to --noconfirm but allow users to override it. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2014-09-30Add --assume-installed optionFlorian Pritz1-1/+3
This allows to ignore specific dependencies. Signed-off-by: Florian Pritz <bluewind@xinu.at>
2014-01-28Remove ts and sw from vim modeline when noet is setFlorian Pritz1-1/+1
Forcing vim users to view files with a tabstop of 2 seems really unnecessary when noet is set. I find it much easier to read code with ts=4 and I dislike having to override the modeline by hand. Command run: find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} + Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2014-01-06Update copyright years for 2014Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-10-14include invalid options in error messagesAndrew Gregory1-1/+2
On invalid combinations of flags we were only printing the unhelpfully vague message "invalid option". Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-10-14rename PKG_LOCALITY_LOCAL -> PKG_LOCALITY_NATIVEAndrew Gregory1-1/+1
PKG_LOCALITY_LOCAL was confusing because the enum is used with -Q, so all packages are "local". Also reversed the config->op_q_locality assignment so that the locality matches the option used. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-10-14use non-ascii identifiers for optflagsAndrew Gregory1-1/+30
Removes the overlap between optflags for different operations that allowed non-sensical combinations of flags such as: $ pacman -Si --changelog $package --changelog is -c, meaning --clean for -S $ pacman -Q --sysupgrade --sysupgrade is -u, meaning --upgrades for -Q Also add a few missing braces. Original-work-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07introduce colstr for colourizingSimon Gomizelj1-0/+16
colstr_t colstr will hold the colourizing agents. Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07add a config settings and flag for coloursSimon Gomizelj1-1/+8
Colours can be enabled in two ways: - Add Color to pacman.conf. This enables colours automatically. - Use --color=WHEN where WHEN is none/auto/always. WHEN as 'never' disables colours (overrides config file), as 'auto' enables colours when stdout is a tty, and 'always' enables colours no matter what. Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-07Add configuration option for Upgrade operation SigLevelAllan McRae1-0/+2
Add LocalFileSigLevel and RemoteFileSigLevel to control the signature checking for "pacman -U <file>" and "pacman -U <url>" operations respectively. The starting value for both these options is SigLevel, if it is specified in the [options] section, or the built-in system default. The specified values override and/or supplement this initial value. Note there is no distinction between setting "Required" and "PackageRequired" as there are no database options for Upgrade operations. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-29Consolidate --foreign/--native filteringSimon Gomizelj1-2/+9
Also fix a small bug where pacman won't check if the sync dbs are first downloaded when invoked with --native (it should). Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-03Update copyright year for 2013Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2012-11-27pacman: add -n/--native filter to -QSimon Gomizelj1-0/+1
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2012-04-12Remove SyncFirst optionDan McGee1-1/+0
This has outlived its usefulness and causes more problems than it solves. It has historically only ever been used to install pacman first. That should not be needed given we provide the vercmp utility (which has no library dependencies) and so calling pacman in install scripts is a sign of poor packaging. Work-duplicated-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-21Merge branch 'maint'Dan McGee1-1/+0
Conflicts: contrib/pacsysclean.in src/pacman/conf.h
2012-02-20Update copyright yearsAllan McRae1-1/+1
Add 2012 to the copyright range for all libalpm and pacman source files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-15Revert "Add -S --recursive operation"Dan McGee1-1/+0
This reverts commit f3fa77bcf1d792971c314f8c0de255866e89f3f3 along with making other necessary changes to fully back this (mis)feature out until we can do it correctly. The quick summary here is this was not implemented correctly; provides are not fully taken into account in this logic, and making that happen exposes a lot of other flaws in this code that are covered up later on in the dependency resolving process by several other pieces of convoluted and conditional logic. Tests have been adjusted accordingly. Some test EXISTS conditions have been removed as we already know the package is installed locally, and we also are checking the VERSION condition anyway. With these two related revert commits, we do have some changes in test pass/fail results: * upgrade078.py: does not pass, this is due to --recursive getting removed for -U/-S operations after this commit. * sync302.py: the version checks have been disabled, so this test continues to pass but has been scaled back in scope. * sync303.py: now passes, was failing before. * sync304.py: still failing, was failing before. * sync305.py: now passes, was failing before. * sync306.py: still passes, was passing before. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-19Allow UseDelta option to specify a delta ratioDan McGee1-1/+1
Rework the frontend and backend to allow passing a ratio value in for UseDelta rather than having a hardcoded #define-d 0.7 value always used. This is useful for those with fast connections, who would likely benefit from tuning this ratio to lower values; it is also useful for general testing purposes. The libalpm API changes for this, but we do support the old config file format with a no-value 'UseDelta' option; in this case we simply use the old default of 0.7. We clamp the ratio values to a sane range between 0.0 and 2.0, allowing ratios above 1.0 for testing purposes. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Remove -f short option for --forceDan McGee1-1/+2
This is not something that should be used on a frequent basis, and giving it a short option encourages use without making the drawbacks obvious. For the 1% of situations that require it, the 5 extra keystrokes are a fair price to pay. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Keep track of explicitly added and removed packagesDan McGee1-0/+3
This allows us to sort the output list by showing all pulled dependencies first, followed by the explicitly specified targets. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11pacman: remove --dbonly shortoptDave Reisner1-1/+2
This is somewhat of a dangerous option with limited use cases. Don't advertise it as an easily accessibly option. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11Add -S --recursive operationDan McGee1-1/+2
This closely matches what we had before for -R --recursive. Basically, when specifying a target (e.g., pacman), we can now recursively pull all dependencies, regardless of version specifiers and whether they are already satisfied in the local database. This could be used to update pacman on a system with an old glibc, for example, as both pacman and glibc would get pulled into the transaction. This is most useful with --needed to prevent needless reinstalls as described in the man page changes. The end goal of this change is to wire it into SyncFirst and have it be the default mode of operation there, but that belongs in a separate changeset. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-05signing: move to new signing verification and return schemeDan McGee1-1/+1
This gives us more granularity than the former Never/Optional/Always trifecta. The frontend still uses these values temporarily but that will be changed in a future patch. * Use 'siglevel' consistenly in method names, 'level' as variable name * The level becomes an enum bitmask value for flexibility * Signature check methods now return a array of status codes rather than a simple integer success/failure value. This allows callers to determine whether things such as an unknown signature are valid. * Specific signature error codes mostly disappear in favor of the above returned status code; pm_errno is now set only to PKG_INVALID_SIG or DB_INVALID_SIG as appropriate. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-28Rename pmtransflag_t to alpm_transflag_tAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmhandle_t to alpm_handle_tAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-07Revamp pacman setup code to handle new alpm initialize routineDan McGee1-2/+14
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-05-05Move parseconfig to conf.cDan McGee1-0/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-21New VerbosePkgLists optionJakob Gruber1-2/+6
If enabled, displays package lists for upgrade, sync and remove operations formatted as a table. Falls back to default list display if insufficient terminal columns are available. Example output: :: Starting full system upgrade... :: Replace libjpeg with testing/libjpeg-turbo? [Y/n] resolving dependencies... looking for inter-conflicts... Remove (1): Name Old Version Size libjpeg 8.3.0-1 0.83 MB Total Removed Size: 0.83 MB Targets (5): Name Old Version New Version Size libjpeg-turbo 1.1.0-1 0.20 MB linux-firmware 20110201-1 20110227-1 8.23 MB ncurses 5.7-4 5.8-1 0.92 MB ppl 0.11.1-1 0.11.2-1 2.74 MB v4l-utils 0.8.1-1 0.8.3-1 0.23 MB Total Download Size: 12.32 MB Total Installed Size: 58.82 MB Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-21Remove ShowSize optionJakob Gruber1-1/+0
Dan: The commit message originally referenced "VerbosePkgLists", but I'm going to change the name of the option. In addition, this patch serves a purpose being standalone- we should really do things like this with -S --print and hopefully -Q --print in the future. Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23Let pacman specify GnuPG's home directory.Chris Brannon1-1/+3
GnuPG looks for configuration files and keyrings in its home directory. For a user, that is typically ~/.gnupg. This patch causes pacman to use /etc/pacman.d/gnupg/ as the default GnuPG home. One may override the default using --gpgdir on the command-line or GPGDir in pacman's configuration file. Signed-off-by: Chris Brannon <cmbrannon@cox.net> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Allow both cleanmethod values to be specified at the same timeDan McGee1-2/+2
No reason to disallow this- it allows keeping even more packages around in the cache. Test cases included for this case and to ensure the default behavior is preserved. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-08Update copyright years for 2011Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05Introduce -D, --databaseNagy Gabor1-1/+2
The request of FS#12950 is implemented. On the backend side, I introduced a new function, alpm_db_set_pkgreason(), to modify the install reason of a package in the local database. On the front-end side, I introduced a new main operation, -D/--database, which has two options, --asdeps and --asexplicit. I documented this in pacman manual. I've created two pactests to test -D: database001.py and database002.py. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15Bump copyright dates to 2010Dan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-15Add new --print operation for all operationsXavier Chantry1-2/+4
And a new --print-format option to configure the output. This implements FS#14208 Example usage : pacman -Sp --print-format "%r/%n-%v : %l [%s]" kdelibs extra/kdelibs-4.3.2-4 : ftp://mir2.archlinuxfr.org/archlinux/extra/os/i686/kdelibs-4.3.2-4-i686.pkg.tar.gz [0,00] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-05-15 10:06:02 +0200