diff options
| -rw-r--r-- | lib/Smokeping/probes/CiscoRTTMonDNS.pm | 10 | ||||
| -rw-r--r-- | lib/Smokeping/probes/CiscoRTTMonTcpConnect.pm | 10 |
2 files changed, 16 insertions, 4 deletions
diff --git a/lib/Smokeping/probes/CiscoRTTMonDNS.pm b/lib/Smokeping/probes/CiscoRTTMonDNS.pm index c4e2760..bd51fbd 100644 --- a/lib/Smokeping/probes/CiscoRTTMonDNS.pm +++ b/lib/Smokeping/probes/CiscoRTTMonDNS.pm @@ -60,7 +60,7 @@ If you want to be a bit more restrictive with SNMP write access to the router, t The above configuration grants SNMP read-write only to 10.37.3.5 (the smokeping host) and only to the ciscoRttMon MIB tree. The probe does not need access to SNMP variables outside the RttMon tree. DOC bugs => <<DOC, -The probe does unnecessary DNS queries, i.e. more than configured in the "pings" variable, because the RTTMon MIB only allows to set a total time for all queries in one measurement run (one "life"). Currently the probe sets the life duration to "pings"*2+3 seconds (2 secs is the timeout value hardcoded into this probe). +The probe does unnecessary DNS queries, i.e. more than configured in the "pings" variable, because the RTTMon MIB only allows to set a total time for all queries in one measurement run (one "life"). Currently the probe sets the life duration to "pings"*5+3 seconds (5 secs is the timeout value hardcoded into this probe). DOC see_also => <<DOC, L<http://oss.oetiker.ch/smokeping/> @@ -77,7 +77,7 @@ DOC } } -my $pingtimeout =2; +my $pingtimeout = 5; sub new($$$) { @@ -275,6 +275,12 @@ DOC _doc => "The (mandatory) name parameter is the DNS name to resolve.", _example => 'www.foobar.com.au', }, + timeout => { + _re => '\d+', + _example => 15, + _default => $pingtimeout+10, + _doc => "How long a single RTTMonDNS 'ping' take at maximum plus 10 seconds to spare. Since we control our own timeout the only purpose of this is to not have us killed by the ping method from basefork.", + }, iosint => { _doc => <<DOC, The (optional) iosint parameter is the source address for the DNS packets. diff --git a/lib/Smokeping/probes/CiscoRTTMonTcpConnect.pm b/lib/Smokeping/probes/CiscoRTTMonTcpConnect.pm index 0e76e96..3c2f2b7 100644 --- a/lib/Smokeping/probes/CiscoRTTMonTcpConnect.pm +++ b/lib/Smokeping/probes/CiscoRTTMonTcpConnect.pm @@ -54,7 +54,7 @@ If you want to be a bit more restrictive with SNMP write access to the router, t The above configuration grants SNMP read-write only to 10.37.3.5 (the smokeping host) and only to the ciscoRttMon MIB tree. The probe does not need access to SNMP variables outside the RttMon tree. DOC bugs => <<DOC, -The probe establishes unnecessary connections, i.e. more than configured in the "pings" variable, because the RTTMon MIB only allows to set a total time for all connections in one measurement run (one "life"). Currently the probe sets the life duration to "pings"*2+3 seconds (2 secs is the timeout value hardcoded into this probe). +The probe establishes unnecessary connections, i.e. more than configured in the "pings" variable, because the RTTMon MIB only allows to set a total time for all connections in one measurement run (one "life"). Currently the probe sets the life duration to "pings"*5+3 seconds (5 secs is the timeout value hardcoded into this probe). DOC see_also => <<DOC, L<http://oss.oetiker.ch/smokeping/> @@ -70,7 +70,7 @@ DOC } } -my $pingtimeout =2; +my $pingtimeout = 5; sub new($$$) { @@ -274,6 +274,12 @@ The (optional) port parameter lets you configure the destination TCP port on the host. The default is the http port 80. DOC }, + timeout => { + _re => '\d+', + _example => 15, + _default => $pingtimeout+10, + _doc => "How long a single RTTMon TcpConnect 'ping' take at maximum plus 10 seconds to spare. Since we control our own timeout the only purpose of this is to not have us killed by the ping method from basefork.", + }, iosint => { _example => '10.33.22.11', _doc => <<DOC, |