summaryrefslogtreecommitdiffstats
path: root/lib
diff options
context:
space:
mode:
Diffstat (limited to 'lib')
-rw-r--r--lib/Smokeping/probes/DismanPing.pm106
1 files changed, 42 insertions, 64 deletions
diff --git a/lib/Smokeping/probes/DismanPing.pm b/lib/Smokeping/probes/DismanPing.pm
index 05c54a7..c264c31 100644
--- a/lib/Smokeping/probes/DismanPing.pm
+++ b/lib/Smokeping/probes/DismanPing.pm
@@ -16,10 +16,11 @@ to generate the POD document.
use strict;
use base qw(Smokeping::probes::basevars);
-use SNMP_Session;
-use SNMP_util "0.89";
+use SNMP_Session "1.13";
+use SNMP_util "1.13";
use Smokeping::pingMIB "0.1";
use Socket;
+use Net::Domain qw(hostname);
sub pod_hash {
my $e = "=";
@@ -31,7 +32,8 @@ DOC
Uses the DISMAN-PING-MIB to cause a remote system to send probes.
DOC
authors => <<DOC,
-Bill Fenner <fenner\@research.att.com>
+Bill Fenner <fenner\@research.att.com>,
+Tobi Oetiker <tobi\@oetiker.ch>
DOC
credits => <<DOC,
This structure of this probe module is heavily based on
@@ -53,8 +55,8 @@ This probe requires read/write access to the pingCtlTable.
It also requires read-only access to the pingResultsTable and the
pingHistoryTable. The DISMAN-PING-MIB is structured such that
it is possible to restrict by pingCtlOwnerIndex. This probe
-uses a pingCtlOwnerIndex of "smokeping" by default; use
-B<ownerindex> to configure this if needed.
+uses a pingCtlOwnerIndex of "SP on hostname ICPM ping"
+by default; use B<ownerindex> to configure this if needed.
${e}head2 SAMPLE JUNOS CONFIGURATION
@@ -115,13 +117,13 @@ sub probevars {
_sub => sub {
my $val = shift;
return
- "ERROR: for DismanPing, pings must be between 1 and 15"
+ "ERROR: for DismanPing, pings must be between 1 and 15."
unless $val >= 1 and $val <= 15;
return undef;
},
_doc => <<DOC,
How many pings should be sent to each target. Note that the maximum value
-for DismanPing is 15, which is less than the SmokePing default, so this
+for DismanPing MIP is 15, which is less than the SmokePing default, so this
class has its own default value. If your Database section specifies a
value less than 15, you must also set it for this probe.
Note that the number of pings in
@@ -146,6 +148,9 @@ sub targetvars {
The SNMP OwnerIndex to use when setting up the test.
When using VACM, can map to a Security Name or Group Name
of the entity running the test.
+
+By default this will be set to
+
DOC
_example => "smokeping"
},
@@ -241,7 +246,6 @@ sub ProbeDesc($) {
# way to verify that the values haven't changed since the last
# time we set it.
sub ping($) {
- use Data::Dumper;
my $self = shift;
my $pending = {};
my $longest = 0;
@@ -251,23 +255,20 @@ sub ping($) {
my $addr = $t->{addr};
my $idx = idx($t);
my $host = host($t);
-
# Delete any existing row. Ignore error.
#Smokeping::do_log("DismanPing deleting for $host $t->{vars}{menu}");
my $ret =
- &snmpset( $host, "pingCtlRowStatus.$idx", "integer", 6 ); #destroy
+ snmpset( $host, "pingCtlRowStatus.$idx", "integer", 6 ); #destroy
+
if ( !defined($ret) ) {
- Smokeping::do_log(
-"DismanPing: old probe for $t->{vars}{menu} is probably running: "
+ Smokeping::do_log( "DismanPing: old probe for $t->{vars}{host} is probably running: "
. $SNMP_Session::errmsg );
next;
}
my $targetaddr = inet_aton($addr);
- if ( !defined($targetaddr) ) {
- Smokeping::do_log(
-"DismanPing can't resolve destination address $addr for $t->{vars}{menu}"
- );
+ if ( not defined $targetaddr ) {
+ Smokeping::do_log("DismanPing can't resolve destination address $addr for $t->{vars}{host}");
next;
}
@@ -277,25 +278,23 @@ sub ping($) {
my @values = (
"pingCtlTargetAddressType.$idx", "integer", 1, #ipv4
"pingCtlTargetAddress.$idx", "octetstring", $targetaddr,
+ "pingCtlFrequency.$idx", "gauge", 0, # run test only once
+ "pingCtlTimeOut.$idx", "gauge", 3, # timeout ping after 3 seconds (this is also the interval for sending pings)
"pingCtlProbeCount.$idx", "gauge", $t->{vars}{pings},
"pingCtlMaxRows.$idx", "gauge", $t->{vars}{pings},
"pingCtlAdminStatus.$idx", "integer", 1, #enabled
"pingCtlRowStatus.$idx", "integer", 4, #createAndGo
-
-# "pingCtlRowStatus.$idx", "integer", 5, #createAndWait
);
# add pingsrc, packetsize into @values if defined
- if ( defined( $t->{vars}{packetsize} ) ) {
+ if ( defined $t->{vars}{packetsize} ) {
unshift( @values,
"pingCtlDataSize.$idx", "gauge", $t->{vars}{packetsize} );
}
- if ( defined( $t->{vars}{pingsrc} ) ) {
+ if ( defined $t->{vars}{pingsrc} ) {
my $srcaddr = inet_aton( $t->{vars}{pingsrc} );
- if ( !defined($srcaddr) ) {
- Smokeping::do_log(
-"WARNING: DismanPing can't resolve source address $t->{vars}{pingsrc} for $t->{vars}{menu}"
- );
+ if ( not defined $srcaddr ) {
+ Smokeping::do_log("WARNING: DismanPing can't resolve source address $t->{vars}{pingsrc} for $t->{vars}{host}");
}
else {
unshift(
@@ -309,25 +308,12 @@ sub ping($) {
# Todo: pingCtlDSField.
# Todo: pingCtlTimeout.
my @snmpsetret;
- if ( ( @snmpsetret = &snmpset( $host, @values ) )
- && defined( $snmpsetret[0] ) )
- {
- {
- use Data::Dumper;
- open( my $tmp, ">>/tmp/disman-smoke" );
- print $tmp Dumper(
- scalar( localtime(time) ),
- $t->{vars}{menu},
- \@snmpsetret
- );
- close($tmp);
- }
+ if ( ( @snmpsetret = snmpset( $host, @values ) )
+ and defined $snmpsetret[0] ) {
$pending->{ $t->{tree} } = 1;
}
else {
- Smokeping::do_log(
-"ERROR: DismanPing row creation failed for $t->{vars}{menu}: $SNMP_Session::errmsg"
- );
+ Smokeping::do_log( "ERROR: DismanPing row creation failed for $t->{vars}{host} on $t->{vars}{pinghost}: $SNMP_Session::errmsg" );
}
my $timeout = 3; # XXX DEFVAL for pingCtlTimeOut
my $length = $t->{vars}{pings} * $timeout;
@@ -337,7 +323,7 @@ sub ping($) {
}
my $setup = time - $start;
Smokeping::do_debuglog(
- "DismanPing took $setup to set up, now sleeping for $longest");
+ "DismanPing took $setup s to set up, now sleeping for $longest s");
sleep($longest);
my $allok = 0;
my $startend = time;
@@ -349,25 +335,20 @@ sub ping($) {
my $host = host($t);
# check if it's done - pingResultsOperStatus != 1
- my $status = &snmpget( $host, "pingResultsOperStatus.$idx" );
- if ( !defined($status) || $status == 1 )
- { # if SNMP fails, assume it's not done.
+ my $status = snmpget( $host, "pingResultsOperStatus.$idx" );
+ if ( not defined $status or $status == 1 ) {
+ # if SNMP fails, assume it's not done.
my $howlong = time - $start;
if ( $howlong > $self->step ) {
- Smokeping::do_log(
-"DismanPing: abandoning $t->{vars}{menu} after $howlong seconds"
- );
+ Smokeping::do_log( "DismanPing: abandoning $t->{vars}{host} after $howlong seconds" );
$pending->{ $t->{tree} } = 0;
}
else {
- Smokeping::do_log(
-"DismanPing: $t->{vars}{menu} is still running after $howlong seconds"
- );
+ Smokeping::do_log( "DismanPing: $t->{vars}{host} is still running after $howlong seconds" );
$allok = 0;
}
next;
}
-
# if so, get results from History Table
my @times = ();
@@ -383,24 +364,25 @@ sub ping($) {
);
Smokeping::do_debuglog( "DismanPing: table download returned "
. ( defined($ret) ? $ret : "undef" ) );
-
+
# Make sure we have exactly pings results.
# Fewer are probably an implementation problem (we asked for
# 15, it said the test was done, but didn't return 15).
# More are a less-bad implementation problem - we can keep
# the last 15.
if ( @times < $t->{vars}{pings} ) {
- Smokeping::do_log( "DismanPing: $t->{vars}{menu} only returned "
+ Smokeping::do_log( "DismanPing: $t->{vars}{host} only returned "
. scalar(@times)
. " results" );
@times = ();
}
elsif ( @times > $t->{vars}{pings} ) {
- Smokeping::do_log( "DismanPing: $t->{vars}{menu} returned "
+ Smokeping::do_log( "DismanPing: $t->{vars}{host} returned "
. scalar(@times)
. " results, taking last $t->{vars}{pings}" );
@times = @times[ $#times - $t->{vars}{pings} .. $#times ];
}
+
if (@times) {
my (@goodtimes) = ();
foreach $t (@times) {
@@ -415,8 +397,7 @@ sub ping($) {
}
my $howlong = time - $start;
my $endtime = time - $startend;
- Smokeping::do_debuglog(
- "DismanPing took $howlong total, $endtime collecting results");
+ Smokeping::do_debuglog( "DismanPing took $howlong total, $endtime collecting results");
}
# Return index string for this test:
@@ -432,20 +413,17 @@ sub ping($) {
# get a unique test name.
sub idx ($) {
my $t = shift;
-
- my $ownerindex = $t->{vars}{ownerindex} || "smokeping";
- my $testname = $t->{vars}{menu};
- if ( length($testname) > 32 ) {
- $testname = substr( $testname, -32 );
- }
+ my $ownerindex = substr($t->{vars}{ownerindex} || 'SP on '.hostname().' ICMP ping',0,32);
+ print STDERR $ownerindex;
+ my $testname = $t->{vars}{host};
return join( ".",
length($ownerindex), unpack( "C*", $ownerindex ),
- length($testname), unpack( "C*", $testname ) );
+ length($testname), unpack( "C*", $testname )
+ );
}
sub host ($) {
my $t = shift;
-
# gotta be aggressive with the SNMP to keep within
# the time budget, so set the timeout to 1 second
# and only try twice.