Contribute GH60 layout (#1820)

* Add first version of my layout

* Tweaked layout

* gh60/bluezio: SpaceFn CapsLock interferes with Ctrl+Arrows

2 files changed, 111 insertions, 0 deletions

diff --git a/keyboards/gh60/keymaps/bluezio/keymap.c b/keyboards/gh60/keymaps/bluezio/keymap.c
new file mode 100644
index 000000000..ab8909f47
--- /dev/null
+++ b/keyboards/gh60/keymaps/bluezio/keymap.c
@@ -0,0 +1,42 @@
+#include "gh60.h"
+#include "action_layer.h"
+
+// lshift split, backspace split, full ANSI enter, full right shift
+#define KEYMAP_BZIO(                                                         \
+               K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \
+               K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+               K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+               K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
+               K40, K41, K42,           K45,                K4A, K4B, K4C, K4D \
+                ) {                                                     \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \
+    { K40, K41, K42, KC_NO,    KC_NO,    K45, KC_NO,    KC_NO,    KC_NO,    K49, K4A, K4B, K4C, K4D } \
+  }
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: HHKB with hyper key where ctrl used to be, and right half of left
+       shift used as a key lock */
+    KEYMAP_BZIO(
+        KC_ESC,           KC_1,    KC_2,    KC_3,  KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV, \
+        KC_TAB,           KC_Q,    KC_W,    KC_E,  KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,\
+        KC_LCTL,          KC_A,    KC_S,    KC_D,  KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,\
+        KC_LSFT, KC_LOCK, KC_Z,    KC_X,    KC_C,  KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
+        KC_HYPR, KC_LGUI, KC_LALT, LT(1, KC_SPC),                                           KC_RALT, KC_RGUI, KC_APP,  KC_RCTL),
+
+    /* 1: spacefn with WASD arrows/navigation block and extra space key for
+       realignment of source code, plus IJKL mouse arrows, volume up/down in <>,
+       and caps lock where it used to be */
+    KEYMAP_BZIO(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,     KC_F4,      KC_F5,      KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, \
+        KC_TRNS,          KC_PGUP, KC_UP,   KC_PGDOWN, KC_INSERT,  KC_MS_BTN2, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   \
+        KC_TRNS,          KC_LEFT, KC_DOWN, KC_RGHT,   KC_DELETE,  KC_MS_BTN1, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_HOME, KC_SPC,  KC_END,    KC_PSCREEN, KC_TRNS,    KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
diff --git a/keyboards/gh60/keymaps/bluezio/rules.mk b/keyboards/gh60/keymaps/bluezio/rules.mk
new file mode 100644
index 000000000..bfd26779c
--- /dev/null
+++ b/keyboards/gh60/keymaps/bluezio/rules.mk
@@ -0,0 +1,69 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES			# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+KEY_LOCK_ENABLE = yes # KC_LOCK
+
+LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift