Remove autotools support

This removes support for autotools in favour of meson.

19 files changed, 8 insertions, 1800 deletions

diff --git a/.gitignore b/.gitignore
index 499d499b..01975fd2 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,24 +1,3 @@
 *~
 *.o
-ABOUT-NLS
-aclocal.m4
-autom4te.cache
-config.h
-config.h.in
-config.log
-config.status
-config.status.lineno
-configure
-configure.lineno
-cov-int
-cscope.in.out
-cscope.out
-cscope.po.out
-intl
-libtool
-Makefile
-Makefile.in
 pacman-*.tar.gz
-root
-stamp-h1
-tags
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index a53d60cf..65b8c729 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -34,23 +34,6 @@ arch-docs:
     - meson -Ddoc=enabled build
     - ninja -C build
 
-arch-autoconf:
-  extends: .arch-test
-  script:
-    - pacman -Syu --needed --noconfirm autoconf-archive
-    - autoreconf -i
-    - ./configure --enable-warningflags --disable-doc
-    - make
-    - fakechroot make check
-
-arch-distcheck:
-  extends: .arch-test
-  script:
-    - pacman -Syu --needed --noconfirm autoconf-archive asciidoc
-    - autoreconf -i
-    - ./configure --enable-warningflags
-    - fakechroot make distcheck
-
 arch-clang:
   extends: .arch-test
   script:
diff --git a/HACKING b/HACKING
index 009a4682..334b7ac0 100644
--- a/HACKING
+++ b/HACKING
@@ -176,16 +176,3 @@ For pacman:
 -------------------------------------------
 
 Never directly include config.h. This will always be added via Makefiles.
-
-GDB and Valgrind Usage
-~~~~~~~~~~~~~~~~~~~~~~
-
-When using GDB or valgrind on pacman, you will want to run it on the actual
-binary rather than the shell script wrapper produced by libtool. The actual
-binary lives at `src/pacman/.libs/lt-pacman`, and will exist after running
-`./src/pacman/pacman` at least once.
-
-For example, to run valgrind:
-
-    ./src/pacman/pacman
-    valgrind --leak-check=full -- src/pacman/.libs/lt-pacman -Syu
diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index 007e9396..00000000
--- a/INSTALL
+++ /dev/null
@@ -1,370 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
-
-   Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.  This file is offered as-is,
-without warranty of any kind.
-
-Basic Installation
-==================
-
-   Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.  Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below.  The lack of an optional feature in a given package is not
-necessarily a bug.  More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-   The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
-
-     Running `configure' might take a while.  While running, it prints
-     some messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package, generally using the just-built uninstalled binaries.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.  When installing into a prefix owned by root, it is
-     recommended that the package be configured and built as a regular
-     user, and only the `make install' phase executed with root
-     privileges.
-
-  5. Optionally, type `make installcheck' to repeat any self-tests, but
-     this time using the binaries in their final installed location.
-     This target does not install anything.  Running this target as a
-     regular user, particularly if the prior `make install' required
-     root privileges, verifies that the installation completed
-     correctly.
-
-  6. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-  7. Often, you can also type `make uninstall' to remove the installed
-     files again.  In practice, not all packages have tested that
-     uninstallation works correctly, even though it is required by the
-     GNU Coding Standards.
-
-  8. Some packages, particularly those that use Automake, provide `make
-     distcheck', which can by used by developers to test that all other
-     targets like `make install' and `make uninstall' work correctly.
-     This target is generally not run by end users.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.  This
-is known as a "VPATH" build.
-
-   With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
-   On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
-this:
-
-     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-                 CPP="gcc -E" CXXCPP="g++ -E"
-
-   This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
-   The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
-   The first method involves providing an override variable for each
-affected directory.  For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated.  The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
-   The second method involves providing the `DESTDIR' variable.  For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names.  The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters.  On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-   Some packages offer the ability to configure how verbose the
-execution of `make' will be.  For these packages, running `./configure
---enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
---disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
-     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
-   HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved.  Use GNU `make'
-instead.
-
-   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
-
-     ./configure CC="cc"
-
-and if that doesn't work, try
-
-     ./configure CC="cc -nodtk"
-
-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
-
-     ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS
-     KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation.  Until the limitation is lifted, you can use
-this workaround:
-
-     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
-     Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
-
-`--no-create'
-`-n'
-     Run the configure checks, but stop before creating any output
-     files.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
diff --git a/Makefile.am b/Makefile.am
deleted file mode 100644
index fbbc2559..00000000
--- a/Makefile.am
+++ /dev/null
@@ -1,78 +0,0 @@
-SUBDIRS = lib/libalpm src/util src/pacman scripts etc test/pacman test/util test/scripts
-if WANT_DOC
-SUBDIRS += doc
-endif
-
-DIST_SUBDIRS = $(SUBDIRS) src/common
-
-ACLOCAL_AMFLAGS = -I m4 --install
-AM_MAKEFLAGS = --no-print-directory
-
-# Make sure we test and build manpages when doing distcheck
-DISTCHECK_CONFIGURE_FLAGS = --enable-doc --disable-git-version \
-		bashcompdir='$${prefix}/share/bash-completion/completions'
-
-# Some files automatically included, so they aren't specified below:
-#   AUTHORS, COPYING, NEWS, README
-EXTRA_DIST = \
-	HACKING test/tap.sh \
-	meson.build meson_options.txt \
-	build-aux/edit-script.sh.in \
-	build-aux/meson-make-symlink.sh \
-	build-aux/script-wrapper.sh.in
-
-
-# Sample makepkg prototype files
-pkgdatadir = ${datadir}/${PACKAGE}
-dist_pkgdata_DATA = \
-	proto/PKGBUILD.proto \
-	proto/PKGBUILD-split.proto \
-	proto/PKGBUILD-vcs.proto \
-	proto/proto.install
-
-$(top_srcdir)/test/pacman/tests/TESTS: $(wildcard test/pacman/tests/*.py)
-	@printf "TESTS += %s\n" $^ | LC_ALL=C sort -u > "$@"
-
-TESTS =  test/scripts/parseopts_test.sh \
-				 test/scripts/makepkg-template_test.sh \
-				 test/scripts/pacman-db-upgrade-v9.py \
-				 test/util/vercmptest.sh
-include $(top_srcdir)/test/pacman/tests/TESTS
-
-TEST_SUITE_LOG = test/test-suite.log
-TEST_EXTENSIONS = .py
-AM_TESTS_ENVIRONMENT = \
-	PMTEST_UTIL_DIR=$(top_builddir)/src/util/; export PMTEST_UTIL_DIR; \
-	PMTEST_SCRIPT_DIR=$(top_builddir)/scripts/; export PMTEST_SCRIPT_DIR; \
-	PMTEST_SCRIPTLIB_DIR=$(top_srcdir)/scripts/library/; export PMTEST_SCRIPTLIB_DIR; \
-	PMTEST_LIBMAKEPKG_DIR=$(top_builddir)/scripts/libmakepkg/; export PMTEST_LIBMAKEPKG_DIR;
-LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) \
-								 $(top_srcdir)/build-aux/tap-driver.sh
-PY_LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) \
-								 $(top_srcdir)/build-aux/tap-driver.sh
-PY_LOG_COMPILER = $(PYTHON) $(top_srcdir)/test/pacman/pactest.py
-AM_PY_LOG_FLAGS = \
-		--scriptlet-shell $(SCRIPTLET_SHELL) \
-		--ldconfig $(LDCONFIG) \
-		--bindir $(top_builddir)/src/pacman \
-		--bindir $(top_builddir)/scripts
-if !HAVE_LIBGPGME
-AM_PY_LOG_FLAGS += --without-gpg
-endif
-if !HAVE_LIBCURL
-AM_PY_LOG_FLAGS += --without-curl
-endif
-
-# create the pacman DB, cache, makepkg-template and system hook directories upon install
-install-data-local:
-	for dir in "$(DESTDIR)$(localstatedir)/lib/pacman" "$(DESTDIR)$(localstatedir)/cache/pacman/pkg" \
-	           "$(DESTDIR)$(datarootdir)/makepkg-template" "$(DESTDIR)$(datarootdir)/libalpm/hooks"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-
-update-po:
-	$(MAKE) -C lib/libalpm/po update-po
-	$(MAKE) -C scripts/po update-po
-	$(MAKE) -C src/pacman/po update-po
-
-.PHONY: update-po
diff --git a/RELEASE b/RELEASE
index 7a9184b4..1ce462fd 100644
--- a/RELEASE
+++ b/RELEASE
@@ -1,22 +1,21 @@
 The following checklist should be used for making a pacman release.
 
-- Ensure "make distcheck" succeeds
+- Ensure "ninja dist" succeeds
 - Call a freeze to development.
 - Send translation updates to Transifex at least two weeks before a major
   release (see below).  At this stage, strings can only be changed for a
   major issue.
 - Update NEWS and README files
 - Pull translation updates from Transifex
-- Update version in configure.ac as described in file
+- Update version in meson.build as described in file
 - Update doc/index.asciidoc
 - Create a signed git tag (git tag -s vX.Y.Z -m "commit message")
-- Create and sign release tarballs (generate with "make distcheck")
-  - In addition to the standard autotools toolchain, autoconf-archive is needed
+- Create and sign release tarballs (generate with "ninja dist")
 - Update pacman website
 
 Transifex updates are handled using the transifex client. The basic process is:
 - Pull updates from transifex ("tx pull -a -f --minimum-perc 75")
-- Update po files ("make update-po")
+- Update po files ("./build-aux/update-po")
 - Fix all translation errors found
 - Add any new locales to the relevant LINGUAS file
 - Optional: Make any manual changes needed (e.g. fixing spacing in a string)
diff --git a/configure.ac b/configure.ac
deleted file mode 100644
index 9db39232..00000000
--- a/configure.ac
+++ /dev/null
@@ -1,594 +0,0 @@
-#                                               -*- Autoconf -*-
-# Process this file with autoconf to produce a configure script.
-# Minimum version of autoconf required
-AC_PREREQ(2.64)
-
-# UPDATING VERSION NUMBERS FOR RELEASES
-#
-# libalpm:
-# current
-#   The most recent interface number that this library implements.
-# revision
-#   The implementation number of the current interface.
-# age
-#   The difference between the newest and oldest interfaces that this library
-#   implements. In other words, the library implements all the interface
-#   numbers in the range from number current - age to current.
-#
-# 1. Start with version information of `0:0:0' for each libtool library.
-# 2. Update the version information only immediately before a public release of
-#    your software. More frequent updates are unnecessary, and only guarantee
-#    that the current interface number gets larger faster.
-# 3. If the library source code has changed at all since the last update, then
-#    increment revision (`c:r:a' becomes `c:r+1:a').
-# 4. If any interfaces have been added, removed, or changed since the last
-#    update, increment current, and set revision to 0.
-# 5. If any interfaces have been added since the last public release, then
-#    increment age.
-# 6. If any interfaces have been removed since the last public release, then
-#    set age to 0.
-#
-# pacman:
-#   Extreme huge major changes:
-#     pacman_version_major += 1
-#     pacman_version_minor = 0
-#     pacman_version_micro = 0
-#
-#   Real releases:
-#     pacman_version_minor += 1
-#     pacman_version_micro = 0
-#
-#   Bugfix releases:
-#     pacman_version_micro += 1
-
-m4_define([lib_current], [12])
-m4_define([lib_revision], [1])
-m4_define([lib_age], [0])
-
-m4_define([pacman_version_major], [5])
-m4_define([pacman_version_minor], [2])
-m4_define([pacman_version_micro], [1])
-m4_define([pacman_version],
-          [pacman_version_major.pacman_version_minor.pacman_version_micro])
-
-# Autoconf initialization
-AC_INIT([pacman], [pacman_version], [pacman-dev@archlinux.org])
-AC_CONFIG_SRCDIR([config.h.in])
-AC_CONFIG_HEADERS([config.h])
-AC_CONFIG_MACRO_DIR([m4])
-AC_CONFIG_AUX_DIR([build-aux])
-AC_REQUIRE_AUX_FILE([tap-driver.sh])
-
-AC_CANONICAL_HOST
-AM_INIT_AUTOMAKE([1.11 foreign])
-AM_SILENT_RULES([yes])
-
-LT_INIT
-LIB_VERSION=`expr lib_current - lib_age`.lib_age.lib_revision
-LIB_VERSION_INFO="lib_current:lib_revision:lib_age"
-
-# Respect empty CFLAGS during compiler tests
-if test "x$CFLAGS" = "x"; then
-  CFLAGS=""
-fi
-
-# Set substitution values for version stuff in Makefiles and anywhere else,
-# and put LIB_VERSION in config.h
-AC_SUBST(LIB_VERSION)
-AC_SUBST(LIB_VERSION_INFO)
-AC_DEFINE_UNQUOTED([LIB_VERSION], ["$LIB_VERSION"], [libalpm version number])
-
-# Help line for root directory
-AC_ARG_WITH(root-dir,
-	AS_HELP_STRING([--with-root-dir=path], [set the location of the root operating directory]),
-	[ROOTDIR=$withval], [ROOTDIR=/])
-
-# Help line for package extension
-AC_ARG_WITH(pkg-ext,
-	AS_HELP_STRING([--with-pkg-ext=ext], [set the file extension used by packages]),
-	[PKGEXT=$withval], [PKGEXT=.pkg.tar.gz])
-
-# Help line for source package directory
-AC_ARG_WITH(src-ext,
-	AS_HELP_STRING([--with-src-ext=ext], [set the file extension used by source packages]),
-	[SRCEXT=$withval], [SRCEXT=.src.tar.gz])
-
-# Help line for buildscript filename
-AC_ARG_WITH(buildscript,
-	AS_HELP_STRING([--with-buildscript=name], [set the build script name used by makepkg]),
-	[BUILDSCRIPT=$withval], [BUILDSCRIPT=PKGBUILD])
-
-# Help line for buildscript filename
-AC_ARG_WITH(makepkg-template-dir,
-	AS_HELP_STRING([--with-makepkg-template-dir=name], [set the template dir used by makepkg-template]),
-	[TEMPLATE_DIR=$withval], [TEMPLATE_DIR=${datarootdir}/makepkg-template])
-
-# Help line for debug package suffix
-AC_ARG_WITH(debug-suffix,
-	AS_HELP_STRING([--with-debug-suffix=name], [set the suffix for split debugging symbol packages used by makepkg]),
-	[DEBUGSUFFIX=$withval], [DEBUGSUFFIX=debug])
-
-# Help line for changing shell used to run install scriptlets
-AC_ARG_WITH(scriptlet-shell,
-	AS_HELP_STRING([--with-scriptlet-shell=shell],
-		[set the full path to the shell used to run install scriptlets]),
-	[SCRIPTLET_SHELL=$withval], [SCRIPTLET_SHELL=/bin/sh])
-
-# Help line for ldconfig path
-AC_ARG_WITH(ldconfig,
-	AS_HELP_STRING([--with-ldconfig=path],
-		[set the full path to ldconfig]),
-	[LDCONFIG=$withval], [LDCONFIG=/sbin/ldconfig])
-
-# Help line for determining whether file is seccomp-enabled
-AC_ARG_WITH(file-seccomp,
-	AS_HELP_STRING([--with-file-seccomp={yes|no|auto}],
-		[determine whether file is seccomp-enabled @<:@default=auto@:>@]),
-	[with_file_seccomp=$withval], [with_file_seccomp=auto])
-
-# Help line for selecting a crypto library
-AC_ARG_WITH(crypto,
-	AS_HELP_STRING([--with-crypto={openssl|nettle}],
-		[select crypto implementation @<:@default=openssl@:>@]),
-	[with_crypto=$withval], [with_crypto=openssl])
-
-# Help line for using gpgme
-AC_ARG_WITH(gpgme,
-	AS_HELP_STRING([--with-gpgme], [use GPGME for PGP signature verification]),
-	[], [with_gpgme=check])
-
-# Help line for using libcurl
-AC_ARG_WITH(libcurl,
-	AS_HELP_STRING([--with-libcurl], [use libcurl for the internal downloader]),
-	[], [with_libcurl=check])
-
-# Help line for documentation
-AC_ARG_ENABLE(doc,
-	AS_HELP_STRING([--disable-doc], [prevent make from looking at doc/ dir]),
-	[wantdoc=$enableval], [wantdoc=yes])
-
-# Help line for doxygen
-AC_ARG_ENABLE(doxygen,
-	AS_HELP_STRING([--enable-doxygen], [build your own API docs via Doxygen]),
-	[wantdoxygen=$enableval], [wantdoxygen=no])
-
-# Help line for debug
-AC_ARG_ENABLE(debug,
-	AS_HELP_STRING([--enable-debug], [enable debugging support]),
-	[debug=$enableval], [debug=no])
-
-# Help line for compiler warning flags
-AC_ARG_ENABLE(warningflags,
-	AS_HELP_STRING([--enable-warningflags], [enable extra compiler warning flags]),
-	[warningflags=$enableval], [warningflags=no])
-
-# Help line for using git version in pacman version string
-AC_ARG_ENABLE(git-version,
-	AS_HELP_STRING([--enable-git-version],
-		[enable use of git version in version string if available]),
-	[wantgitver=$enableval], [wantgitver=no])
-
-# Enable large file support if available (must be enabled before
-# testing compilation against gpgme).
-AC_SYS_LARGEFILE
-
-# Record large file flags in pkgconfig file
-if test "$enable_largefile" != no; then
-	if test "$ac_cv_sys_file_offset_bits" != 'no'; then
-		LFS_CFLAGS="-D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits"
-	fi
-fi
-AC_SUBST(LFS_CFLAGS)
-
-
-# Checks for programs.
-AC_PROG_AWK
-AC_PROG_CC_C99
-AC_PROG_INSTALL
-AC_CHECK_PROGS([PYTHON], [python3 python], [false])
-AC_PATH_PROGS([BASH_SHELL], [bash bash4], [false])
-
-# check for perl 5.10.1 (needed by makepkg-template)
-AC_PATH_PROG([PERL],[perl])
-AC_DEFUN([AX_PROG_PERL_VERSION],
-	[AC_CACHE_CHECK([for Perl version $1 or later], [ax_cv_prog_perl_version],
-		[AS_IF(["$PERL" -e 'require v$1;' >/dev/null 2>&1],
-			[ax_cv_prog_perl_version=yes],
-			[ax_cv_prog_perl_version=no])])
-	AS_IF([test x"$ax_cv_prog_perl_version" = xyes], [$2], [$3])])
-AX_PROG_PERL_VERSION([5.10.1], [], [AC_MSG_ERROR([perl is too old])])
-
-AS_IF([test "x$BASH_SHELL" = "xfalse"],
-	AC_MSG_WARN([*** bash >= 4.4.0 is required for pacman scripts]),
-	[bash_version_major=`$BASH_SHELL -c 'echo "${BASH_VERSINFO[[0]]}"'`
-	bash_version_minor=`$BASH_SHELL -c 'echo "${BASH_VERSINFO[[1]]}"'`
-	ok=yes
-	if test "$bash_version_major" -lt 4; then
-		ok=no
-	fi
-	if test "$bash_version_major" -eq 4 && test "$bash_version_minor" -lt 4; then
-		ok=no
-	fi
-	if test "$ok" = "no"; then
-		AC_MSG_ERROR([*** bash >= 4.4.0 is required for pacman scripts])
-	fi
-	unset bash_version_major bash_version_minor ok])
-
-# find installed gettext
-AM_GNU_GETTEXT([external], [need-ngettext])
-AM_GNU_GETTEXT_VERSION(0.13.1)
-
-AC_CHECK_LIB([m], [fabs], ,
-	AC_MSG_ERROR([libm is needed to compile pacman!]))
-
-PKG_CHECK_VAR(bashcompdir, [bash-completion], [completionsdir], ,
-	bashcompdir="${datarootdir}/bash-completion/completions")
-
-# Check for libarchive
-PKG_CHECK_MODULES(LIBARCHIVE, [libarchive >= 3.0.0], ,
-	AC_MSG_ERROR([*** libarchive >= 3.0.0 is needed to compile pacman!]))
-
-m4_pattern_forbid([^AX_COMPARE_VERSION$])
-# Check file for seccomp
-if test "x$with_file_seccomp" = "xauto"; then
-	file_version="$(file --version| sed -n 's/^file-\(.*\)/\1/p')"
-	AX_COMPARE_VERSION([$file_version], [ge], [5.38], [with_file_seccomp=yes])
-fi
-if test "x$with_file_seccomp" = "xyes"; then
-	FILECMD="file -S"
-else
-	FILECMD="file"
-fi
-AC_SUBST(FILECMD)
-
-# Check for OpenSSL
-have_openssl=no
-have_nettle=no
-if test "x$with_crypto" = "xnettle"; then
-	AC_SUBST(pc_crypto, [nettle])
-	PKG_CHECK_MODULES(NETTLE, [nettle],
-		[AC_DEFINE(HAVE_LIBNETTLE, 1, [Define whether to use nettle]) have_nettle=yes], have_nettle=no)
-	if test "x$have_nettle" = xno -a "x$with_crypto" = xnettle; then
-		AC_MSG_ERROR([*** nettle support requested but libraries not found])
-	fi
-else if test "x$with_crypto" = "xopenssl"; then
-	AC_SUBST(pc_crypto, [libcrypto])
-	PKG_CHECK_MODULES(LIBSSL, [libcrypto],
-		[AC_DEFINE(HAVE_LIBSSL, 1, [Define if libcrypto is available]) have_openssl=yes], have_openssl=no)
-	if test "x$have_openssl" = xno; then
-		AC_MSG_ERROR([*** openssl support requested but libraries not found])
-	fi
-else
-	AC_MSG_ERROR([*** unknown crypto support library requested - $with_crypto])
-fi
-fi
-AM_CONDITIONAL(HAVE_LIBSSL, [test "$have_openssl" = "yes"])
-AM_CONDITIONAL(HAVE_LIBNETTLE, [test "$have_nettle" = "yes"])
-
-# Check for libcurl
-have_libcurl=no
-if test "x$with_libcurl" != "xno"; then
-	PKG_CHECK_MODULES(LIBCURL, [libcurl >= 7.32.0],
-		[AC_DEFINE(HAVE_LIBCURL, 1, [Define if libcurl is available]) have_libcurl=yes], have_libcurl=no)
-	if test "x$have_libcurl" = xno -a "x$with_libcurl" = xyes; then
-		AC_MSG_ERROR([*** libcurl >= 7.32.0 is required for internal downloader support])
-	fi
-fi
-AM_CONDITIONAL(HAVE_LIBCURL, [test "$have_libcurl" = "yes"])
-# used to generate libalpm.pc
-if test "x$have_libcurl" = xyes; then
-	AC_SUBST(pc_libcurl, [libcurl])
-fi
-
-# Check for gpgme
-AC_MSG_CHECKING(whether to link with libgpgme)
-AS_IF([test "x$with_gpgme" != "xno"],
-	[AC_MSG_RESULT([yes])],
-	[AC_MSG_RESULT([no])])
-
-have_gpgme=no
-if test "x$with_gpgme" != "xno"; then
-	PKG_CHECK_MODULES(GPGME, [gpgme],
-		[AC_DEFINE([HAVE_LIBGPGME], [1], [Define if gpgme should be used to provide GPG signature support.])
-		AC_SUBST(pc_gpgme, [gpgme])
-		have_gpgme=yes],
-		[AM_PATH_GPGME([1.3.0],
-			[LIBS_save="$LIBS"
-			CPPFLAGS_save="$CPPFLAGS"
-			CFLAGS_save="$CFLAGS"
-
-			LIBS="$LIBS $GPGME_LIBS"
-			CPPFLAGS="$CPPFLAGS $GPGME_CPPFLAGS"
-			CFLAGS="$CFLAGS $GPGME_CFLAGS"
-
-			AC_MSG_CHECKING([for sane gpgme])
-			AC_LINK_IFELSE(
-				[AC_LANG_PROGRAM(
-					[[#include <gpgme.h>]],
-					[[return gpgme_check_version("1.3.0");]])],
-				[AC_MSG_RESULT([yes])
-				have_gpgme=yes
-				AC_DEFINE([HAVE_LIBGPGME], [1], [Define if gpgme should be used to provide GPG signature support.])
-				AC_SUBST(pc_gpgme_libs, ["$GPGME_LIBS"])],
-				[AC_MSG_RESULT([no])
-				have_gpgme=no
-				unset GPGME_LIBS
-				unset GPGME_CFLAGS]
-				AS_IF([test "x$with_gpgme" = "xyes"],
-					[AC_MSG_FAILURE([*** gpgme >= 1.3.0 is needed for GPG signature support])])
-				)
-
-			LIBS="$LIBS_save"
-			CPPFLAGS="$CPPFLAGS_save"
-			CFLAGS="$CFLAGS_save"
-			unset CPPFLAGS_save
-			unset CFLAGS_save],)])
-fi
-
-AS_IF([test "x$have_gpgme" = xno -a "x$with_gpgme" = xyes],
-	[AC_MSG_FAILURE([--with-gpgme was given, but gpgme was not found])])
-AM_CONDITIONAL([HAVE_LIBGPGME], [test "x$have_gpgme" = "xyes"])
-
-# Checks for header files.
-AC_CHECK_HEADERS([fcntl.h float.h glob.h langinfo.h libintl.h limits.h \
-                  locale.h mntent.h netinet/in.h netinet/tcp.h \
-                  stddef.h string.h sys/ioctl.h \
-                  sys/mnttab.h sys/mount.h \
-                  sys/param.h sys/statvfs.h sys/time.h sys/types.h \
-                  sys/ucred.h syslog.h termios.h wchar.h])
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_C_INLINE
-AC_TYPE_INT64_T
-AC_TYPE_MODE_T
-AC_TYPE_OFF_T
-AC_TYPE_PID_T
-AC_TYPE_SIZE_T
-AC_TYPE_SSIZE_T
-AC_STRUCT_TM
-AC_TYPE_UID_T
-AC_STRUCT_DIRENT_D_TYPE
-PATH_MAX_DEFINED
-
-# Checks for library functions.
-AC_FUNC_FORK
-AC_FUNC_GETMNTENT
-AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK
-AC_CHECK_FUNCS([dup2 getcwd getmntinfo gettimeofday memmove memset \
-                mkdir realpath regcomp rmdir setenv setlocale strcasecmp \
-                strchr strcspn strdup strerror strndup strnlen strrchr \
-                strsep strstr strtol swprintf tcflush wcwidth uname])
-AC_CHECK_MEMBERS([struct stat.st_blksize],,,[[#include <sys/stat.h>]])
-
-# For the diskspace code
-FS_STATS_TYPE
-AC_CHECK_MEMBERS([struct statvfs.f_flag],,,[[#include <sys/statvfs.h>]])
-AC_CHECK_MEMBERS([struct statfs.f_flags],,,[[#include <sys/param.h>
-                  #include <sys/mount.h>]])
-
-# Check if we can use symbol visibility support in GCC
-GCC_VISIBILITY_CC
-
-# Host-dependant definitions
-INODECMD="stat -c '%i %n'"
-STRIP_BINARIES="--strip-all"
-STRIP_SHARED="--strip-unneeded"
-STRIP_STATIC="--strip-debug"
-case "${host_os}" in
-	*bsd*)
-		INODECMD="stat -f '%i %N'"
-		;;
-	darwin*)
-		host_os_darwin=yes
-		INODECMD="/usr/bin/stat -f '%i %N'"
-		STRIP_BINARIES=""
-		STRIP_SHARED="-S"
-		STRIP_STATIC="-S"
-		;;
-esac
-AM_CONDITIONAL([DARWIN], test "x$host_os_darwin" = "xyes")
-AC_SUBST(INODECMD)
-AC_SUBST(STRIP_BINARIES)
-AC_SUBST(STRIP_SHARED)
-AC_SUBST(STRIP_STATIC)
-
-# Variables plugged into makepkg.conf
-CARCH="${host%%-*}"
-CHOST="${host}"
-AC_SUBST(CARCH)
-AC_SUBST(CHOST)
-
-# Check for documentation support and status
-AC_CHECK_PROGS([ASCIIDOC], [asciidoc])
-AC_MSG_CHECKING([for building documentation])
-if test "x$wantdoc" = "xyes" ; then
-	if test $ASCIIDOC ; then
-		AC_MSG_RESULT([yes, enabled by configure])
-	else
-		asciidoc="(warning : asciidoc not installed)"
-		AC_MSG_RESULT([yes $asciidoc])
-	fi
-	wantdoc=yes
-else
-	AC_MSG_RESULT([no, disabled by configure])
-	wantdoc=no
-fi
-AM_CONDITIONAL(WANT_DOC, test "x$wantdoc" = "xyes")
-
-# Check for doxygen support and status
-AC_CHECK_PROGS([DOXYGEN], [doxygen])
-AC_MSG_CHECKING([for doxygen])
-if test "x$wantdoxygen" = "xyes" ; then
-	if test $DOXYGEN ; then
-		AC_MSG_RESULT([yes])
-		usedoxygen=yes
-	else
-		AC_MSG_RESULT([no, doxygen missing])
-		usedoxygen=no
-	fi
-else
-	AC_MSG_RESULT([no, disabled by configure])
-	usedoxygen=no
-fi
-AM_CONDITIONAL(USE_DOXYGEN, test "x$usedoxygen" = "xyes")
-
-# Enable or disable debug code
-AC_MSG_CHECKING(for debug mode request)
-if test "x$debug" = "xyes" ; then
-	AC_MSG_RESULT(yes)
-	AC_DEFINE([PACMAN_DEBUG], , [Enable debug code])
-	# Check for -fstack-protector availability
-	GCC_STACK_PROTECT_LIB
-	GCC_STACK_PROTECT_CC
-	GCC_STACK_CLASH_PROTECTION
-	GCC_FORTIFY_SOURCE_CC
-	WARNING_CFLAGS="-g -Wall -Werror"
-else
-	AC_MSG_RESULT(no)
-	WARNING_CFLAGS="-Wall"
-fi
-
-# Enable or disable compiler warning flags
-AC_MSG_CHECKING(for excessive compiler warning flags)
-if test "x$warningflags" = "xyes" ; then
-	AC_MSG_RESULT(yes)
-	CFLAGS_ADD([-Wcast-align], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wclobbered], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wempty-body], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wfloat-equal], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wformat-nonliteral], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wformat-security], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wignored-qualifiers], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wimplicit-fallthrough], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Winit-self], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wlogical-op], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wmissing-declarations], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wmissing-field-initializers], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wmissing-parameter-type], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wmissing-prototypes], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wold-style-declaration], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Woverride-init], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wpointer-arith], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wredundant-decls], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wshadow], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wsign-compare], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wstrict-aliasing], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wstrict-overflow=5], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wstrict-prototypes], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wtype-limits], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wuninitialized], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wunused-but-set-parameter], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wunused-parameter], [WARNING_CFLAGS])
-	CFLAGS_ADD([-Wwrite-strings], [WARNING_CFLAGS])
-else
-	AC_MSG_RESULT(no)
-fi
-
-# Enable or disable use of git version in pacman version string
-AC_MSG_CHECKING(whether to use git version if available)
-if test "x$wantgitver" = "xyes" ; then
-	AC_CHECK_PROGS([GIT], [git])
-	AC_CHECK_FILE([.git/], hasgitdir=yes)
-	usegitver=$ac_cv_file__git_
-	if test $GIT -a "x$hasgitdir" = "xyes"; then
-		AC_DEFINE([USE_GIT_VERSION], , [Use GIT version in version string])
-	fi
-else
-	AC_MSG_RESULT([no, disabled by configure])
-	usegitver=no
-fi
-AM_CONDITIONAL(USE_GIT_VERSION, test "x$usegitver" = "xyes")
-
-# Set root directory
-AC_SUBST(ROOTDIR)
-AC_DEFINE_UNQUOTED([ROOTDIR], "$ROOTDIR", [The location of the root operating directory])
-# Set package file extension
-AC_SUBST(PKGEXT)
-AC_DEFINE_UNQUOTED([PKGEXT], "$PKGEXT", [The file extension used by pacman packages])
-# Set source package file extension
-AC_SUBST(SRCEXT)
-AC_DEFINE_UNQUOTED([SRCEXT], "$SRCEXT", [The file extension used by pacman source packages])
-# Set makepkg build script name
-AC_SUBST(BUILDSCRIPT)
-AC_DEFINE_UNQUOTED([BUILDSCRIPT], "$BUILDSCRIPT", [The build script name used by makepkg])
-# Set makepkg-template template directory
-AC_SUBST(TEMPLATE_DIR)
-AC_DEFINE_UNQUOTED([TEMPLATE_DIR], "$TEMPLATE_DIR", [The template directory used by makepkg-teplate])
-# Set makepkg split debugging symbol package suffix
-AC_SUBST(DEBUGSUFFIX)
-AC_DEFINE_UNQUOTED([DEBUGSUFFIX], "$DEBUGSUFFIX", [The suffix for debugging symbol packages used by makepkg])
-# Set shell used by install scriptlets
-AC_SUBST(SCRIPTLET_SHELL)
-AC_DEFINE_UNQUOTED([SCRIPTLET_SHELL], "$SCRIPTLET_SHELL", [The full path of the shell used to run install scriptlets])
-# Set ldconfig path
-AC_SUBST(LDCONFIG)
-AC_DEFINE_UNQUOTED([LDCONFIG], "$LDCONFIG", [The full path to ldconfig])
-
-
-# Configuration files
-AC_CONFIG_FILES([
-lib/libalpm/Makefile
-lib/libalpm/po/Makefile.in
-lib/libalpm/libalpm.pc
-src/common/Makefile
-src/pacman/Makefile
-src/pacman/po/Makefile.in
-src/util/Makefile
-scripts/Makefile
-scripts/po/Makefile.in
-doc/Makefile
-etc/Makefile
-test/pacman/Makefile
-test/pacman/tests/Makefile
-test/scripts/Makefile
-test/util/Makefile
-Makefile
-])
-AC_OUTPUT
-
-echo "
-${PACKAGE_NAME}:
-
-  Build information:
-    source code location   : ${srcdir}
-    prefix                 : ${prefix}
-    sysconfdir             : $(eval echo ${sysconfdir})
-       conf file           : $(eval echo ${sysconfdir})/pacman.conf
-    localstatedir          : $(eval echo ${localstatedir})
-       database dir        : $(eval echo ${localstatedir})/lib/pacman/
-       cache dir           : $(eval echo ${localstatedir})/cache/pacman/pkg/
-
-    compiler               : ${CC}
-    preprocessor flags     : ${CPPFLAGS}
-    compiler flags         : ${WARNING_CFLAGS} ${CFLAGS}
-    library flags          : ${LIBS} ${LIBSSL_LIBS} ${NETTLE_LIBS} ${LIBARCHIVE_LIBS} ${LIBCURL_LIBS} ${GPGME_LIBS}
-    linker flags           : ${LDFLAGS}
-
-    Architecture           : ${CARCH}
-    Host Type              : ${CHOST}
-    File inode command     : ${INODECMD}
-    File seccomp command   : ${FILECMD}
-
-    libalpm version        : ${LIB_VERSION}
-    libalpm version info   : ${LIB_VERSION_INFO}
-    pacman version         : ${PACKAGE_VERSION}
-    using git version      : ${usegitver}
-
-  Directory and file information:
-    root working directory : ${ROOTDIR}
-    package extension      : ${PKGEXT}
-    source pkg extension   : ${SRCEXT}
-    build script name      : ${BUILDSCRIPT}
-    template directory     : ${TEMPLATE_DIR}
-
-  Compilation options:
-    Use libcurl            : ${have_libcurl}
-    Use GPGME              : ${have_gpgme}
-    Use OpenSSL            : ${have_openssl}
-    Use nettle             : ${have_nettle}
-    Run make in doc/ dir   : ${wantdoc} ${asciidoc}
-    Doxygen support        : ${usedoxygen}
-    debug support          : ${debug}
-    extra warning flags    : ${warningflags}
-    use git version        : ${wantgitver}
-"
diff --git a/doc/Makefile.am b/doc/Makefile.am
deleted file mode 100644
index 4de67566..00000000
--- a/doc/Makefile.am
+++ /dev/null
@@ -1,162 +0,0 @@
-# We have to do some funny stuff here with the manpages. In order to ensure
-# a dist tarball doesn't get put out there without manpages, we keep those
-# files listed in EXTRA_DIST no matter what. However, we only add them to
-# man_MANS if --enable-asciidoc and/or --enable-doxygen are used.
-
-MANPAGES = \
-	alpm-hooks.5 \
-	pacman.8 \
-	makepkg.8 \
-	makepkg-template.1 \
-	repo-add.8 \
-	vercmp.8 \
-	pacman-key.8 \
-	PKGBUILD.5 \
-	makepkg.conf.5 \
-	pacman.conf.5 \
-	libalpm.3 \
-	BUILDINFO.5 \
-	pacman-conf.8
-
-DOXYGEN_MANS = $(wildcard man3/*.3)
-
-HTML_MANPAGES = $(addsuffix .html,$(MANPAGES))
-ASCIIDOC_MANPAGES = $(addsuffix .asciidoc,$(MANPAGES))
-
-HTML_OTHER = \
-	index.html \
-	submitting-patches.html \
-	translation-help.html \
-	HACKING.html
-
-HTML_DOCS = \
-	$(HTML_MANPAGES) \
-	$(HTML_OTHER)
-
-EXTRA_DIST = \
-	meson.build \
-	asciidoc.conf \
-	asciidoc-override.css \
-	PKGBUILD-example.txt \
-	footer.asciidoc \
-	index.asciidoc \
-	submitting-patches.asciidoc \
-	translation-help.asciidoc \
-	$(ASCIIDOC_MANPAGES) \
-	$(MANPAGES) \
-	$(DOXYGEN_MANS)
-
-# Files that should be removed, but which Automake does not know.
-MOSTLYCLEANFILES = *.xml $(MANPAGES) $(HTML_DOCS) \
-	pacman-hooks.5 repo-remove.8 website.tar.gz
-
-# Ensure manpages are fresh when building a dist tarball
-dist-hook:
-	$(MAKE) $(AM_MAKEFLAGS) clean
-	$(MAKE) $(AM_MAKEFLAGS) all
-
-if USE_GIT_VERSION
-GIT_VERSION := $(shell sh -c 'git describe --abbrev=4 --dirty | sed s/^v//')
-REAL_PACKAGE_VERSION = $(GIT_VERSION)
-else
-REAL_PACKAGE_VERSION = $(PACKAGE_VERSION)
-endif
-
-man_MANS =
-dist_man_MANS = $(MANPAGES)
-
-if USE_DOXYGEN
-man_MANS += $(DOXYGEN_MANS)
-
-all-local: doxygen.in
-
-Doxyfile: Doxyfile.in
-	sed 's,@OUTPUT_DIRECTORY@,./,' Doxyfile.in >Doxyfile
-
-doxygen.in: Doxyfile
-	$(DOXYGEN) $(srcdir)/Doxyfile
-endif
-
-man: $(MANPAGES)
-html: $(HTML_DOCS)
-
-website: website.tar.gz
-
-.PHONY: html website
-
-website.tar.gz: html
-	$(AM_V_GEN)bsdtar czf $@ $(HTML_DOCS) \
-		asciidoc-override.css \
-		-C /etc/asciidoc/stylesheets/ \
-		asciidoc.css \
-		-C /etc/asciidoc/javascripts/ \
-		asciidoc.js \
-		-C /etc/asciidoc/ \
-		images
-
-pkgdatadir = ${datadir}/${PACKAGE}
-
-ASCIIDOC_OPTS = \
-	-f $(srcdir)/asciidoc.conf \
-	-a pacman_version="$(REAL_PACKAGE_VERSION)" \
-	-a pacman_date="`date +%Y-%m-%d`" \
-	-a srcext="$(SRCEXT)" \
-	-a pkgext="$(PKGEXT)" \
-	-a pkgdatadir=$(pkgdatadir) \
-	-a localstatedir=$(localstatedir) \
-	-a sysconfdir=$(sysconfdir) \
-	-a datarootdir=$(datarootdir) \
-	-a rootdir=$(ROOTDIR)
-
-A2X_OPTS = \
-	--no-xmllint \
-	-d manpage \
-	-f manpage \
-	--xsltproc-opts='-param man.endnotes.list.enabled 0 -param man.endnotes.are.numbered 0'
-
-# Generate manpages
-%: %.asciidoc asciidoc.conf footer.asciidoc Makefile.am
-	$(AM_V_GEN)a2x $(A2X_OPTS) --asciidoc-opts="$(ASCIIDOC_OPTS) --out-file=./$@.xml" $(srcdir)/$@.asciidoc
-
-# Generate HTML pages
-%.html: %.asciidoc asciidoc.conf footer.asciidoc Makefile.am
-	$(AM_V_GEN)asciidoc $(ASCIIDOC_OPTS) -o - $*.asciidoc | \
-		sed -e 's/\r$$//' > $@
-
-HACKING.html: ../HACKING
-	$(AM_V_GEN)asciidoc $(ASCIIDOC_OPTS) -o - ../HACKING | \
-		sed -e 's/\r$$//' > $@
-
-# Customizations for certain HTML docs
-%.html: ASCIIDOC_OPTS += -a linkcss -a toc -a icons -a max-width=960px -a stylesheet=asciidoc-override.css
-%.8.html: ASCIIDOC_OPTS += -d manpage
-%.5.html: ASCIIDOC_OPTS += -d manpage
-%.3.html: ASCIIDOC_OPTS += -d manpage
-
-# Custom dependency rules
-PKGBUILD.5 PKGBUILD.5.html: PKGBUILD.5.asciidoc PKGBUILD-example.txt
-
-# Manpages as symlinks
-repo-remove.8: repo-add.8
-	$(RM) repo-remove.8
-	$(LN_S) repo-add.8 repo-remove.8
-
-pacman-hooks.5: alpm-hooks.5
-	$(RM) pacman-hooks.5
-	$(LN_S) alpm-hooks.5 pacman-hooks.5
-
-install-data-hook:
-	cd $(DESTDIR)$(mandir)/man8 && \
-		$(RM) repo-remove.8 && \
-		( $(LN_S) repo-add.8 repo-remove.8 || \
-		ln repo-add.8 repo-remove.8 || \
-		cp repo-add.8 repo-remove.8 )
-	cd $(DESTDIR)$(mandir)/man5 && \
-		$(RM) pacman-hooks.5 && \
-		( $(LN_S) alpm-hooks.5 pacman-hooks.5 || \
-		ln alpm-hooks.5 pacman-hooks.5 || \
-		cp alpm-hooks.5 pacman-hooks.5 )
-
-uninstall-hook:
-	$(RM) $(DESTDIR)$(mandir)/man8/repo-remove.8
-	$(RM) $(DESTDIR)$(mandir)/man5/pacman-hooks.5
diff --git a/doc/index.asciidoc b/doc/index.asciidoc
index ebf02c20..716ceabf 100644
--- a/doc/index.asciidoc
+++ b/doc/index.asciidoc
@@ -193,11 +193,11 @@ link:https://sources.archlinux.org/other/pacman/[]. To install, download the new
 available source tarball, unpack it in a directory, and run the three magic
 commands:
 
-	$ ./configure
-	$ make
-	# make install
+	$ meson build
+	$ ninja -C build
+	# ninja -C build install
 
-You may wish to read the options presented by `./configure --help` in order to
+You may wish to read the options presented by `meson` in order to
 set appropriate paths and build options that are correct for your system.
 
 Development
diff --git a/etc/Makefile.am b/etc/Makefile.am
deleted file mode 100644
index 0d4fbc07..00000000
--- a/etc/Makefile.am
+++ /dev/null
@@ -1,27 +0,0 @@
-dist_sysconf_DATA = makepkg.conf pacman.conf
-EXTRA_DIST = makepkg.conf.in pacman.conf.in
-
-# Files that should be removed, but which Automake does not know.
-MOSTLYCLEANFILES = $(dist_sysconf_DATA)
-
-SED_PROCESS = \
-	$(AM_V_GEN)$(MKDIR_P) $(dir $@) && \
-	$(SED) \
-	-e 's|@sysconfdir[@]|$(sysconfdir)|g' \
-	-e 's|@localstatedir[@]|$(localstatedir)|g' \
-	-e 's|@prefix[@]|$(prefix)|g' \
-	-e 's|@PACKAGE_VERSION[@]|$(PACKAGE_VERSION)|g' \
-	-e 's|@PACKAGE_NAME[@]|$(PACKAGE_NAME)|g' \
-	-e 's|@PKGEXT[@]|$(PKGEXT)|g' \
-	-e 's|@SRCEXT[@]|$(SRCEXT)|g' \
-	-e 's|@STRIP_BINARIES[@]|$(STRIP_BINARIES)|g' \
-	-e 's|@STRIP_SHARED[@]|$(STRIP_SHARED)|g' \
-	-e 's|@STRIP_STATIC[@]|$(STRIP_STATIC)|g' \
-	-e 's|@CARCH[@]|$(CARCH)|g' \
-	-e 's|@CHOST[@]|$(CHOST)|g' \
-	-e 's|@ARCHSWITCH[@]|$(ARCHSWITCH)|g' \
-	-e 's|@ROOTDIR[@]|$(ROOTDIR)|g' \
-	< $< > $@
-
-%.conf: %.conf.in Makefile
-	$(SED_PROCESS)
diff --git a/lib/libalpm/Makefile.am b/lib/libalpm/Makefile.am
deleted file mode 100644
index e4f83223..00000000
--- a/lib/libalpm/Makefile.am
+++ /dev/null
@@ -1,78 +0,0 @@
-AUTOMAKE_OPTIONS = gnu
-
-SUBDIRS = po
-
-EXTRA_DIST = meson.build po/meson.build
-
-lib_LTLIBRARIES = libalpm.la
-include_HEADERS = alpm_list.h alpm.h
-
-AM_CPPFLAGS = \
-	-imacros $(top_builddir)/config.h \
-	-DSYSHOOKDIR=\"@datarootdir@/libalpm/hooks/\" \
-	-DLOCALEDIR=\"@localedir@\"
-
-AM_CFLAGS = -pedantic -D_GNU_SOURCE $(WARNING_CFLAGS)
-
-if ENABLE_VISIBILITY_CC
-if DARWIN
-AM_CFLAGS += -fvisibility=hidden
-else
-AM_CFLAGS += -fvisibility=internal
-endif
-endif
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = libalpm.pc
-
-libalpm_la_SOURCES = \
-	add.h add.c \
-	alpm.h alpm.c \
-	alpm_list.h alpm_list.c \
-	backup.h backup.c \
-	base64.h base64.c \
-	be_local.c \
-	be_package.c \
-	be_sync.c \
-	conflict.h conflict.c \
-	db.h db.c \
-	deps.h deps.c \
-	diskspace.h diskspace.c \
-	dload.h dload.c \
-	error.c \
-	filelist.h filelist.c \
-	graph.h graph.c \
-	group.h group.c \
-	handle.h handle.c \
-	hook.h hook.c \
-	ini.h ini.c \
-	libarchive-compat.h \
-	log.h log.c \
-	package.h package.c \
-	pkghash.h pkghash.c \
-	rawstr.c \
-	remove.h remove.c \
-	signing.c signing.h \
-	sync.h sync.c \
-	trans.h trans.c \
-	util.h util.c \
-	util-common.h util-common.c \
-	version.c
-
-libalpm_la_LDFLAGS = -no-undefined -version-info $(LIB_VERSION_INFO)
-
-libalpm_la_CFLAGS = \
-	$(AM_CFLAGS) \
-	$(GPGME_CFLAGS) \
-	$(LIBARCHIVE_CFLAGS) \
-	$(LIBCURL_CFLAGS) \
-	$(LIBSSL_CFLAGS) \
-	$(NETTLE_CFLAGS)
-
-libalpm_la_LIBADD = \
-	$(LTLIBINTL) \
-	$(GPGME_LIBS) \
-	$(LIBARCHIVE_LIBS) \
-	$(LIBCURL_LIBS) \
-	$(LIBSSL_LIBS) \
-	$(NETTLE_LIBS)
diff --git a/scripts/Makefile.am b/scripts/Makefile.am
deleted file mode 100644
index 47455ed2..00000000
--- a/scripts/Makefile.am
+++ /dev/null
@@ -1,287 +0,0 @@
-# enforce that all scripts have a --help and --version option
-AUTOMAKE_OPTIONS = std-options
-AM_INSTALLCHECK_STD_OPTIONS_EXEMPT = \
-	$(WRAPPER)
-
-SUBDIRS = po
-
-pkgconfigdir = $(datarootdir)/pkgconfig
-pkgconfig_DATA = libmakepkg.pc
-
-bin_SCRIPTS = \
-	$(OURSCRIPTS) \
-	makepkg-template \
-	repo-remove \
-	repo-elephant \
-	$(WRAPPER)
-
-OURSCRIPTS = \
-	makepkg \
-	pacman-db-upgrade \
-	pacman-key \
-	repo-add
-
-EXTRA_DIST = \
-	meson.build \
-	libmakepkg.pc.in \
-	makepkg.sh.in \
-	makepkg-template.pl.in \
-	pacman-db-upgrade.sh.in \
-	pacman-key.sh.in \
-	repo-add.sh.in \
-	wrapper.sh.in \
-	$(COMPLETION_DIST) \
-	$(LIBMAKEPKG_DIST) \
-	po/meson.build
-
-libmakepkgdir = $(datarootdir)/makepkg
-
-LIBMAKEPKGDIRS = \
-	buildenv \
-	executable \
-	integrity \
-	lint_config \
-	lint_package \
-	lint_pkgbuild \
-	source \
-	tidy \
-	util
-
-LIBMAKEPKG_IN = \
-	libmakepkg/executable.sh \
-	libmakepkg/executable/ccache.sh \
-	libmakepkg/executable/checksum.sh \
-	libmakepkg/executable/distcc.sh \
-	libmakepkg/executable/fakeroot.sh \
-	libmakepkg/executable/gpg.sh \
-	libmakepkg/executable/gzip.sh \
-	libmakepkg/executable/pacman.sh \
-	libmakepkg/executable/strip.sh \
-	libmakepkg/executable/sudo.sh \
-	libmakepkg/executable/vcs.sh \
-	libmakepkg/buildenv.sh \
-	libmakepkg/buildenv/buildflags.sh \
-	libmakepkg/buildenv/compiler.sh \
-	libmakepkg/buildenv/debugflags.sh \
-	libmakepkg/buildenv/makeflags.sh \
-	libmakepkg/integrity.sh \
-	libmakepkg/integrity/generate_checksum.sh \
-	libmakepkg/integrity/generate_signature.sh \
-	libmakepkg/integrity/verify_checksum.sh \
-	libmakepkg/integrity/verify_signature.sh \
-	libmakepkg/lint_config.sh \
-	libmakepkg/lint_config/ext.sh \
-	libmakepkg/lint_config/paths.sh \
-	libmakepkg/lint_config/source_date_epoch.sh \
-	libmakepkg/lint_config/variable.sh \
-	libmakepkg/lint_package.sh \
-	libmakepkg/lint_package/build_references.sh \
-	libmakepkg/lint_package/dotfiles.sh \
-	libmakepkg/lint_package/file_names.sh \
-	libmakepkg/lint_package/missing_backup.sh \
-	libmakepkg/lint_pkgbuild.sh \
-	libmakepkg/lint_pkgbuild/arch.sh \
-	libmakepkg/lint_pkgbuild/arch_specific.sh \
-	libmakepkg/lint_pkgbuild/backup.sh \
-	libmakepkg/lint_pkgbuild/changelog.sh \
-	libmakepkg/lint_pkgbuild/checkdepends.sh \
-	libmakepkg/lint_pkgbuild/conflicts.sh \
-	libmakepkg/lint_pkgbuild/depends.sh \
-	libmakepkg/lint_pkgbuild/epoch.sh \
-	libmakepkg/lint_pkgbuild/fullpkgver.sh \
-	libmakepkg/lint_pkgbuild/install.sh \
-	libmakepkg/lint_pkgbuild/makedepends.sh \
-	libmakepkg/lint_pkgbuild/optdepends.sh \
-	libmakepkg/lint_pkgbuild/options.sh \
-	libmakepkg/lint_pkgbuild/package_function.sh \
-	libmakepkg/lint_pkgbuild/package_function_variable.sh \
-	libmakepkg/lint_pkgbuild/pkgbase.sh \
-	libmakepkg/lint_pkgbuild/pkglist.sh \
-	libmakepkg/lint_pkgbuild/pkgname.sh \
-	libmakepkg/lint_pkgbuild/pkgrel.sh \
-	libmakepkg/lint_pkgbuild/pkgver.sh \
-	libmakepkg/lint_pkgbuild/provides.sh \
-	libmakepkg/lint_pkgbuild/source.sh \
-	libmakepkg/lint_pkgbuild/util.sh \
-	libmakepkg/lint_pkgbuild/variable.sh \
-	libmakepkg/source.sh \
-	libmakepkg/source/bzr.sh \
-	libmakepkg/source/file.sh \
-	libmakepkg/source/git.sh \
-	libmakepkg/source/hg.sh \
-	libmakepkg/source/local.sh \
-	libmakepkg/source/svn.sh \
-	libmakepkg/srcinfo.sh \
-	libmakepkg/tidy.sh \
-	libmakepkg/tidy/docs.sh \
-	libmakepkg/tidy/emptydirs.sh \
-	libmakepkg/tidy/libtool.sh \
-	libmakepkg/tidy/purge.sh \
-	libmakepkg/tidy/staticlibs.sh \
-	libmakepkg/tidy/strip.sh \
-	libmakepkg/tidy/zipman.sh \
-	libmakepkg/util.sh \
-	libmakepkg/util/compress.sh \
-	libmakepkg/util/config.sh \
-	libmakepkg/util/dirsize.sh \
-	libmakepkg/util/error.sh \
-	libmakepkg/util/message.sh \
-	libmakepkg/util/option.sh \
-	libmakepkg/util/parseopts.sh \
-	libmakepkg/util/pkgbuild.sh \
-	libmakepkg/util/schema.sh \
-	libmakepkg/util/source.sh \
-	libmakepkg/util/util.sh
-
-LIBMAKEPKG_DIST = \
-	libmakepkg/meson.build \
-	$(addprefix libmakepkg/, $(addsuffix /meson.build, $(LIBMAKEPKGDIRS))) \
-	$(addsuffix .in, $(LIBMAKEPKG_IN))
-
-WRAPPER = \
-	makepkg-wrapper \
-	pacman-db-upgrade-wrapper \
-	pacman-key-wrapper \
-	repo-add-wrapper
-
-COMPLETION_IN = \
-	completion/bash_completion \
-	completion/zsh_completion
-
-COMPLETION_DIST = \
-	$(addsuffix .in, $(COMPLETION_IN))
-
-# Files that should be removed, but which Automake does not know.
-MOSTLYCLEANFILES = $(bin_SCRIPTS) $(LIBMAKEPKG_IN) $(COMPLETION_IN) libmakepkg.pc
-
-clean-local:
-	$(AM_V_at)$(RM) -r .lib
-
-if USE_GIT_VERSION
-GIT_VERSION := $(shell sh -c 'git describe --abbrev=4 --dirty | sed s/^v//')
-REAL_PACKAGE_VERSION = $(GIT_VERSION)
-else
-REAL_PACKAGE_VERSION = $(PACKAGE_VERSION)
-endif
-
-#### Taken from the autoconf scripts Makefile.am ####
-edit = sed \
-	-e 's|@rootdir[@]|$(ROOTDIR)|g' \
-	-e 's|@localedir[@]|$(localedir)|g' \
-	-e 's|@sysconfdir[@]|$(sysconfdir)|g' \
-	-e 's|@localstatedir[@]|$(localstatedir)|g' \
-	-e 's|@libmakepkgdir[@]|$(libmakepkgdir)|g' \
-	-e 's|@pkgdatadir[@]|$(pkgdatadir)|g' \
-	-e 's|@prefix[@]|$(prefix)|g' \
-	-e '1s|!/bin/bash|!$(BASH_SHELL)|g' \
-	-e 's|@PACKAGE_VERSION[@]|$(REAL_PACKAGE_VERSION)|g' \
-	-e 's|@PACKAGE_BUGREPORT[@]|$(PACKAGE_BUGREPORT)|g' \
-	-e 's|@PACKAGE_NAME[@]|$(PACKAGE_NAME)|g' \
-	-e 's|@BUILDSCRIPT[@]|$(BUILDSCRIPT)|g' \
-	-e 's|@TEMPLATE_DIR[@]|$(TEMPLATE_DIR)|g' \
-	-e 's|@DEBUGSUFFIX[@]|$(DEBUGSUFFIX)|g' \
-	-e "s|@INODECMD[@]|$(INODECMD)|g" \
-	-e "s|@FILECMD[@]|$(FILECMD)|g" \
-	-e 's|@SCRIPTNAME[@]|$@|g'
-
-## All the scripts depend on Makefile so that they are rebuilt when the
-## prefix etc. changes. Use chmod -w to prevent people from editing the
-## wrong file by accident.
-$(OURSCRIPTS): %: %.sh.in wrapper.sh.in $(LIBMAKEPKG_IN) Makefile
-	$(AM_V_at)$(RM) $@
-	$(AM_V_GEN)test -f $(srcdir)/$@.sh.in && $(edit) $(srcdir)/$@.sh.in >$@
-	$(AM_V_at)chmod +x,a-w $@
-	@$(BASH_SHELL) -O extglob -n $@
-
-$(LIBMAKEPKG_IN): %: %.in Makefile
-	$(AM_V_at)$(RM) $@
-	$(AM_V_at)$(MKDIR_P) $(dir $@)
-	$(AM_V_GEN)test -f $(srcdir)/$@.in && $(edit) $(srcdir)/$@.in >$@
-	$(AM_V_at)chmod a-w $@
-	@$(BASH_SHELL) -O extglob -n $@
-
-$(COMPLETION_IN) libmakepkg.pc: %: %.in Makefile
-	$(AM_V_at)$(RM) $@
-	$(AM_V_at)$(MKDIR_P) $(dir $@)
-	$(AM_V_GEN)$(edit) $(srcdir)/$@.in >$@
-	$(AM_V_at)chmod a-w $@
-
-all-am: $(COMPLETION_IN)
-
-makepkg-template: \
-	$(srcdir)/makepkg-template.pl.in \
-	Makefile
-
-	$(AM_V_at)$(RM) -f makepkg-template
-	$(AM_V_GEN)$(edit) $< > $@
-	$(AM_V_at)chmod +x,a-w $@
-
-repo-remove repo-elephant: repo-add
-	$(AM_V_at)$(RM) $@
-	$(AM_V_at)$(LN_S) repo-add $@
-
-.SECONDEXPANSION:
-$(WRAPPER): \
-	$(srcdir)/wrapper.sh.in \
-	$$(subst -wrapper,,$$@)
-
-	$(AM_V_at)$(MKDIR_P) .lib
-	$(AM_V_at)mv -f $(subst -wrapper,,$@) .lib
-	$(AM_V_at)$(RM) $@
-	$(AM_V_GEN)sed \
-		-e "s|@PWD[@]|$$(pwd)|" \
-		-e "s|@PROGNAME[@]|$(subst -wrapper,,$@)|g" \
-		-e '1s|!/bin/bash|!$(BASH_SHELL)|g' \
-		$(srcdir)/wrapper.sh.in > $@
-	$(AM_V_at)chmod +x,a-w $@
-	$(AM_V_at)$(LN_S) $@ $(subst -wrapper,,$@)
-
-install-data-local:
-	$(MKDIR_P) $(DESTDIR)$(bashcompdir)
-	$(INSTALL_DATA) completion/bash_completion $(DESTDIR)/$(bashcompdir)/pacman
-	for completion in makepkg pacman-key; do \
-	    $(LN_S) pacman $(DESTDIR)/$(bashcompdir)/$$completion; \
-	done
-	$(MKDIR_P) $(DESTDIR)$(datarootdir)/zsh/site-functions/
-	$(INSTALL_DATA) completion/zsh_completion $(DESTDIR)$(datarootdir)/zsh/site-functions/_pacman
-
-uninstall-local:
-	$(RM) $(DESTDIR)$(bashcompdir)/makepkg
-	$(RM) $(DESTDIR)$(bashcompdir)/pacman
-	$(RM) $(DESTDIR)$(bashcompdir)/pacman-key
-	$(RM) $(DESTDIR)$(datarootdir)/zsh/site-functions/_pacman
-
-install-exec-hook:
-	for wrapper in $(WRAPPER); do \
-		$(RM) $(DESTDIR)$(bindir)/$${wrapper}; \
-		$(INSTALL) .lib/$${wrapper%-wrapper} $(DESTDIR)$(bindir)/$${wrapper%-wrapper}; \
-	done
-	for dir in $(LIBMAKEPKGDIRS); do \
-		$(MKDIR_P) $(DESTDIR)$(libmakepkgdir)/$$dir; \
-	done
-	for lib in $(LIBMAKEPKG); do \
-		$(INSTALL) $(srcdir)/$$lib $(DESTDIR)$(libmakepkgdir)/$${lib#libmakepkg}; \
-	done
-	for lib in $(LIBMAKEPKG_IN); do \
-		$(INSTALL) $$lib $(DESTDIR)$(libmakepkgdir)/$${lib#libmakepkg}; \
-	done
-	cd $(DESTDIR)$(bindir) && \
-		$(RM) repo-elephant && \
-		( $(LN_S) repo-add repo-elephant || \
-		ln repo-add repo-elephant || \
-		cp repo-add repo-elephant )
-	cd $(DESTDIR)$(bindir) && \
-		$(RM) repo-remove && \
-		( $(LN_S) repo-add repo-remove || \
-		ln repo-add repo-remove || \
-		cp repo-add repo-remove )
-
-uninstall-hook:
-	cd $(DESTDIR)$(bindir) && \
-		$(RM) repo-remove repo-elephant
-	for lib in $(LIBMAKEPKG) $(LIBMAKEPKG_IN); do \
-		$(RM) $(DESTDIR)$(libmakepkgdir)/$${lib#libmakepkg}; \
-	done
-	for dir in $(LIBMAKEPKGDIRS); do \
-		$(RM) -r $(DESTDIR)$(libmakepkgdir)/$$dir; \
-	done
diff --git a/src/common/Makefile.am b/src/common/Makefile.am
deleted file mode 100644
index 05378712..00000000
--- a/src/common/Makefile.am
+++ /dev/null
@@ -1,3 +0,0 @@
-EXTRA_DIST = \
-	meson.build \
-	ini.h ini.c util-common.h util-common.c
diff --git a/src/pacman/Makefile.am b/src/pacman/Makefile.am
deleted file mode 100644
index ac2f8e46..00000000
--- a/src/pacman/Makefile.am
+++ /dev/null
@@ -1,69 +0,0 @@
-SUBDIRS = po
-
-EXTRA_DIST = meson.build po/meson.build
-
-# paths set at make time
-conffile  = ${sysconfdir}/pacman.conf
-dbpath    = ${localstatedir}/lib/pacman/
-gpgdir    = ${sysconfdir}/pacman.d/gnupg/
-hookdir   = ${sysconfdir}/pacman.d/hooks/
-cachedir  = ${localstatedir}/cache/pacman/pkg/
-logfile   = ${localstatedir}/log/pacman.log
-
-bin_PROGRAMS = pacman pacman-conf
-
-AM_CPPFLAGS = \
-	-imacros $(top_builddir)/config.h \
-	-I$(top_srcdir)/lib/libalpm \
-	-DLOCALEDIR=\"@localedir@\" \
-	-DCONFFILE=\"$(conffile)\" \
-	-DDBPATH=\"$(dbpath)\" \
-	-DGPGDIR=\"$(gpgdir)\" \
-	-DHOOKDIR=\"$(hookdir)\" \
-	-DCACHEDIR=\"$(cachedir)\" \
-	-DLOGFILE=\"$(logfile)\"
-
-AM_CFLAGS = -pedantic -D_GNU_SOURCE $(WARNING_CFLAGS) \
-	$(LIBARCHIVE_CFLAGS)
-
-if USE_GIT_VERSION
-GIT_VERSION := $(shell sh -c 'git describe --abbrev=4 --dirty | sed s/^v//')
-AM_CPPFLAGS += -DGIT_VERSION=\"$(GIT_VERSION)\"
-endif
-
-pacman_SOURCES = \
-	check.h check.c \
-	conf.h conf.c \
-	database.c \
-	deptest.c \
-	files.c \
-	ini.h ini.c \
-	package.h package.c \
-	pacman.h pacman.c \
-	query.c \
-	remove.c \
-	sighandler.h sighandler.c \
-	sync.c \
-	callback.h callback.c \
-	upgrade.c \
-	util.h util.c \
-	util-common.h util-common.c
-
-pacman_LDADD = \
-	$(LTLIBINTL) \
-	$(top_builddir)/lib/libalpm/.libs/libalpm.la \
-	$(LIBARCHIVE_LIBS)
-
-pacman_conf_SOURCES = pacman-conf.c \
-	util.h \
-	util.c \
-	ini.h \
-	ini.c \
-	util-common.h \
-	util-common.c \
-	callback.h \
-	callback.c \
-	conf.h \
-	conf.c
-
-pacman_conf_LDADD = $(top_builddir)/lib/libalpm/.libs/libalpm.la
diff --git a/src/util/Makefile.am b/src/util/Makefile.am
deleted file mode 100644
index a454f224..00000000
--- a/src/util/Makefile.am
+++ /dev/null
@@ -1,27 +0,0 @@
-EXTRA_DIST = meson.build
-
-# paths set at make time
-conffile  = ${sysconfdir}/pacman.conf
-dbpath    = ${localstatedir}/lib/pacman/
-gpgdir    = ${sysconfdir}/pacman.d/gnupg/
-cachedir  = ${localstatedir}/cache/pacman/pkg/
-
-bin_PROGRAMS = vercmp testpkg
-
-AM_CPPFLAGS = \
-	-imacros $(top_builddir)/config.h \
-	-I$(top_srcdir)/lib/libalpm \
-	-DLOCALEDIR=\"@localedir@\" \
-	-DCONFFILE=\"$(conffile)\" \
-	-DDBPATH=\"$(dbpath)\" \
-	-DGPGDIR=\"$(gpgdir)\" \
-	-DCACHEDIR=\"$(cachedir)\"
-
-AM_CFLAGS = -pedantic -D_GNU_SOURCE $(WARNING_CFLAGS) \
-	$(LIBARCHIVE_CFLAGS)
-
-testpkg_SOURCES = testpkg.c
-testpkg_LDADD = $(top_builddir)/lib/libalpm/.libs/libalpm.la
-
-vercmp_SOURCES = vercmp.c
-vercmp_LDADD = $(top_builddir)/lib/libalpm/libalpm_la-version.lo
diff --git a/test/pacman/Makefile.am b/test/pacman/Makefile.am
deleted file mode 100644
index d211215a..00000000
--- a/test/pacman/Makefile.am
+++ /dev/null
@@ -1,22 +0,0 @@
-SUBDIRS = tests
-
-check_SCRIPTS = \
-	pactest.py \
-	pmdb.py \
-	pmenv.py \
-	pmfile.py \
-	pmpkg.py \
-	pmrule.py \
-	pmtest.py \
-	tap.py \
-	util.py
-
-noinst_SCRIPTS = $(check_SCRIPTS)
-
-EXTRA_DIST = \
-	meson.build \
-	README \
-	TODO \
-	ChangeLog \
-	ldconfig.stub \
-	$(check_SCRIPTS)
diff --git a/test/pacman/tests/Makefile.am b/test/pacman/tests/Makefile.am
deleted file mode 100644
index ba3d0993..00000000
--- a/test/pacman/tests/Makefile.am
+++ /dev/null
@@ -1,5 +0,0 @@
-check_SCRIPTS = $(wildcard *.py)
-
-noinst_SCRIPTS = $(check_SCRIPTS)
-
-EXTRA_DIST = $(check_SCRIPTS)
diff --git a/test/scripts/Makefile.am b/test/scripts/Makefile.am
deleted file mode 100644
index 0100bffb..00000000
--- a/test/scripts/Makefile.am
+++ /dev/null
@@ -1,10 +0,0 @@
-check_SCRIPTS = \
-	parseopts_test.sh \
-	pacman-db-upgrade-v9.py \
-	makepkg-template_test.sh
-
-noinst_SCRIPTS = $(check_SCRIPTS)
-
-EXTRA_DIST = \
-	meson.build \
-	$(check_SCRIPTS)
diff --git a/test/util/Makefile.am b/test/util/Makefile.am
deleted file mode 100644
index a270079f..00000000
--- a/test/util/Makefile.am
+++ /dev/null
@@ -1,8 +0,0 @@
-check_SCRIPTS = \
-	vercmptest.sh
-
-noinst_SCRIPTS = $(check_SCRIPTS)
-
-EXTRA_DIST = \
-	meson.build \
-	$(check_SCRIPTS)