summaryrefslogtreecommitdiffstats
path: root/scripts/Makefile.am
AgeCommit message (Collapse)AuthorFilesLines
2019-01-10libmakepkg: add routine for linting $SOURCE_DATE_EPOCHEli Schwartz1-0/+1
This can only ever be an int, and the specification states that a malformed timestamp should be considered a fatal error. https://reproducible-builds.org/specs/source-date-epoch/ Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2019-01-10makepkg: Better error messages for versions in (check, make, ↵Luke Shumaker1-0/+1
opt)depends/provides/conflicts Given the depends depends=('foo>=1.2-1.par2') and the error message ==> ERROR: pkgver in depends is not allowed to contain colons, forward slashes, hyphens or whitespace. One would be lead to believe that the problem is that they gave a pkgrel in depends at all, not that the pkgrel contains letters. Each of the (check,make,opt)depends, conflicts, and provides linters use a glob to trim off properly formed epoch an rel from the full version string, and pass the remainder to check_pkgver(). This does a good job of accepting/rejecting full versions, but doesn't do a good job of generating good error messages when rejecting if it's because of the epoch or rel. 1. Factor out check_epoch() and check_pkgrel() from lint_epoch() and lint_pkgrel(), similarly to check_pkgver(). 2. Add a check_fullpkgver() that takes a full [epoch:]ver[-rel] string and splits it in to epoch/ver/rel, and calls the appropriate check_ function on each. 3. Use check_fullpkgver() in the {,check,make,opt}depends, conflicts, and provides linters. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-28scripts: make repo-add utilize a wrapper as wellEli Schwartz1-5/+3
Now that repo-add uses libmakepkg, it needs to have $LIBRARY set before testing it in-tree. [Allan: fix "make distcheck"] Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-28autotools: be more accurate in comments when generating processed scriptsEli Schwartz1-1/+1
Instead of assuming all scripts are .sh.in and leaving a comment to that effect, just take the input file directly. This depends on the first dependency for the target being the source of the script. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-28scripts: fix some inaccurate Makefile targets, and be more templatedEli Schwartz1-14/+2
All of our scripts depend on the same pattern .sh.in, and since commit b5d62d2c91a2caf5c18945921cdf12af6f36b2d4, they also all (not just makepkg itself) depend on libmakepkg. There's no real reason to include separate targets for them just to establish dependency rules. While we are at it, fix a longstanding bug where generated wrapper scripts did not depend on wrapper.sh.in (which due to moving to .lib, requires we regenerate the script too), by making the shared target pattern depend on it. All our generated scripts now require the wrapper, even repo-add which now uses libmakepkg. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-28scripts: fix repo-remove/elephant Makefile targetsEli Schwartz1-7/+3
repo-remove and repo-elephant don't care whether repo-add.sh.in is updated... but they do require the repo-add target to be up to date, so use that instead. As a bonus, use the same rule for both of them.
2018-11-27Split prepare_buildenv() to libmakepkgQue Quotion1-0/+6
This opens the door for third parties to provide libmakepkg extentions for the purpose of altering the build environment. Signed-off-by: Que Quotion <quequotion@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-27Split check_software() to libmakepkgQue Quotion1-0/+12
This opens the door for third parties who provide extensions to libmakepkg to supply scripts that confirm the presence of their dependant executables. Signed-off-by: Que Quotion <quequotion@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-11-27buildsys: remove size_to_humanDave Reisner1-2/+1
This was only ever used by paccache, and paccache has since been moved to pacman-contrib.
2018-10-21Port scripts to use libmakepkg's messaging code.Eli Schwartz1-15/+5
Remove all remnants of library/{output_format,term_colors}.sh Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-10-20Drop vestiges of SIZECMDDave Reisner1-1/+0
SIZECMD was replaced in 1af766987f with a POSIX solution, and this token is no longer used/needed.
2018-08-10scripts/completion: derive the bash completion directory from pkg-configEli Schwartz1-3/+8
Default to the standard completionsdir, which is lazy-loaded, rather than hardcoding the compatdir which is not. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-14Remove all modelines from the projectEli Schwartz1-3/+0
Many of these are pointless (e.g. there is no need to explicitly turn on spellchecking and language dictionaries for the manpages by default). The only useful modelines are the ones enforcing the project coding standards for indentation style (and "maybe" filetype/syntax, but everything except the asciidoc manpages and makepkg.conf is already autodetected), and indent style can be applied more easily with .editorconfig Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-29libmakepkg/lint_pkgbuild: lint depends/etc. as if they are pkgnameEli Schwartz1-0/+4
depends, provides, conflicts, replaces, and other variables that are meant to contain package names, are now checked to ensure 1) the name component contains only characters that would equate to a valid pkgname. 2) the version component contains only characters that would equate to a valid pkgver. 3) comparison operator is a valid comparison operator (e.g. provides only allows exact = while optdepends doesn't allow anything) This also refactors pkgname into a shared utility function, wires up pkgbase optdepends and provides to use it, and gives pkgver a touchup to allow referencing where it was called from. Fixes FS#57833 and a bit of extra. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-15libmakepkg: Add basic rules to lint makepkg.conf variablesEli Schwartz1-0/+4
Currently the only things we check are: - Things that should be arrays, are not strings, and vice versa (this was mostly copy-pasted from the similar code in lint_pkgbuild). - Variables that are meant to contain pathname components cannot contain a newline character, because newline characters in pathnames are weird and also don't play well with future changes intended for the --packagelist option. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: refactor archive compression for reusabilityEli Schwartz1-0/+1
This allows for more easily extending the list of allowed compression methods, as it has to be modified in only one place. Also allow the user to specify their own preferred command + options for source packages in addition to compiled packages. Currently, makepkg.conf(5) erroneously claims this is already possible.
2017-12-07makepkg: implement error codesIvy Foster1-0/+1
For your convenience, makepkg now has 16 distinct ways to fail. Also closes FS#54204. Signed-off-by: Ivy Foster <iff@escondida.tk> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-09-14Make the flags used for sed -i configurableAlastair Hughes1-1/+2
Not all sed implementations on linux accept the --follow-symlinks argument, so let the user configure the arguments passed to sed if required. Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com> [Allan: fixed configure summary output] Signed-off-by: Allan McRae <allan@archlinux.org>
2017-01-04makepkg: warn about dotfiles in package rootAndrew Gregory1-0/+1
libalpm reserves paths starting with '.' for its own use and will not extract any other than those it recognizes. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-12-05makepkg: reject packages with newlines in pathsAndrew Gregory1-0/+1
libalpm's local database format does not support paths with newlines. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-12-05Make sure all proper scripts are installed instead of the wrappersJohannes Löthberg1-3/+2
After 1f8f0bd9ac4c11cdc1b9506f9f64d8192ecad4ee all scripts that were changed to using the wrapper for in-tree use have the wrappers installed to the system instead of the actual script, so change the install command to support all wrapped scripts instead of just makepkg. Signed-off-by: Johannes Löthberg <johannes@kyriasis.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-22makepkg: Move parseopts from library to libmakepkgAlad Wenter1-7/+7
parseopts is used in makepkg and other scripts such as pacman-key as a getopt replacement. Instead of including it in those scripts via a macro, move it to libmakepkg/util/parseopts.sh and have scripts source this file where appropriate. To keep the parseopts test, a new variable was introduced: PM_LIBMAKEPKG_DIR Signed-off-by: Alad Wenter <alad@archlinux.info> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-22Generalise makepkg-wrapper to handle any script using libmakepkgAllan McRae1-11/+18
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-22libmakepkg: generate all scriptsAlad Wenter1-8/+9
In order for the scripts to be used in testsuites, it is easiest to generate all of them so they are found in the build directory (which may be different to the source directory). Signed-off-by: Alad Wenter <alad@archlinux.info> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-11Ensure makepkg-wrapper is built after makepkgAllan McRae1-5/+2
makepkg-wrapper did not get rebuilt if makepkg was regenerated due to library changes. Ensure makepkg-wrapper is always generated and linked any time makepkg changes. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-10Move bash/zsh completion out of contribAllan McRae1-1/+28
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-10-10Remove pacman-optimizeAllan McRae1-6/+0
The people who believe that pacman-optimize is actually doing something useful are the same people who are voting for Trump. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-05-18libmakepkg: extract functions for integrity checkingAshley Whetter1-0/+6
Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-03-28libmakepkg: extract functions for writing .SRCINFO filesAshley Whetter1-0/+1
Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-26makepkg: Remove upx and optipng supportAllan McRae1-2/+0
These options were added before libmakepkg allowed passes like this to be dropped in. I prefer only real core packaging tasks to be included in makepkg and additional things like this to be dropped in by a user or distribution that wants to support them. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-07libmakepkg: check if PKGBUILD variables are arrays or not as appropriateAllan McRae1-0/+1
When extracting variables from PKGBUILD (e.g. for .SRCINFO creation) we make assumptions about whether variables are arrays or not. This adds a check to the PKGBUILD linter to ensure variables are arrays or not as appropriate. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-07libmakepkg: util/pkgbuild.sh needs processing on buildAllan McRae1-1/+1
pkgbuild.sh contained @DEBUGSUFFIX@ and so needs to be run through the sed command on build. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: extract functions for source download and extractionAllan McRae1-0/+8
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-19libmakepkg: extract functions for handling source URLsAllan McRae1-1/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-16libmakepkg: extract PKGBUILD linting functionsAllan McRae1-0/+18
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-05-16libmakepkg: extract in_arrayAllan McRae1-1/+2
2015-05-16libmakepkg: move functions for extracting pkgbuild attributesAllan McRae1-1/+2
Also rename some functions for clarity: funcgrep -> grep_function extract_global_var -> extract_global_variable extract_function_var -> extract_function_variable pkgbuild_get_attribute -> get_pkgbuild_attribute Signed-off-by: Allan McRae <allan@archlinux.org>
2015-02-12libmakepkg: move package checking out of tidy_installAllan McRae1-2/+4
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-02-01makepkg: split package tidying into libmakepkgAllan McRae1-0/+13
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-02-01makepkg: split PKGBUILD/makepkg.conf option checking to libmakepkgAllan McRae1-1/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-02-01makepkg: split message functions into libmakepkgAllan McRae1-5/+42
This performs all the needed work for libmakepkg to be included in tarballs, installed into the correct place, and read into makepkg. Also change the install root for libmakepkg to an architecture independant location. Signed-off-by: Allan McRae <allan@archlinux.org>
2014-09-23replace --reference on chmod/chown commandsWolfgang Bumiller1-0/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2014-09-16pacman-db-upgrade: use pacman-style optionsAndrew Gregory1-0/+1
* convert dbpath from argument to option * add --config and --root options * read dbpath and root from config file * if root is set but not dbpath, dbpath is set relative to root Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2014-05-23Do not check makepkg-wrapper for standard optionsAllan McRae1-0/+1
Fixes "make distcheck". Signed-off-by: Allan McRae <allan@archlinux.org>
2014-03-03Fix install order in scripts MakefileAllan McRae1-1/+1
We need to use install-exec-hook instead of install-data-hook to make sure the hook is run after the installation of the scripts into $BINDIR.
2014-01-28Remove ts and sw from vim modeline when noet is setFlorian Pritz1-1/+1
Forcing vim users to view files with a tabstop of 2 seems really unnecessary when noet is set. I find it much easier to read code with ts=4 and I dislike having to override the modeline by hand. Command run: find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} + Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-10-14makepkg: add LIBRARY variableAllan McRae1-0/+3
This points makepkg to where is library is located. Can be overridden by value in the environment. Signed-off-by: Allan McRae <allan@archlinux.org> [Ashley: Rebased] Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk>
2013-10-14makepkg: run locally with libtool style wrapperAllan McRae1-0/+25
Build makepkg to scripts/.lib/makepkg and add a wrapper script to call it. This is not useful at the moment, but is the first step to allowing makepkg to be split into smaller pieces. Signed-off-by: Allan McRae <allan@archlinux.org> [Ashley: rebased] Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk>
2013-05-29Add makepkg-templateFlorian Pritz1-0/+11
This allows for somewhat easy templating for PKGBUILDs. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10distribute library/term_colors.shAllan McRae1-1/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-12 11:14:36 +0100