summaryrefslogtreecommitdiffstats
path: root/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2011-08-11configure: simplify CARCH generation madnessDan McGee1-30/+2
Rather than a hardcoded list of only a few select architectures (of the 250+ case statements in config.guess), simply define CARCH to be the first component of the "target triplet". This introduces one "regression"- powerpc will no longer become ppc. However, this is easily worked around in downstream distros if wanted. This was the only CPU architecture with this oddity so it was felt worth the price to make this change. Note that 'ppc64' wasn't handled in this same odd fashion before anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11build: remove mucking with CARCHFLAGSDan McGee1-11/+0
We've never received an update to this, and gcc has sane defaults out of the box anyway, as do most projects in their build systems. Remove the magic here and just let downstream distros handle any changes or additions necessary, as we already do for LDFLAGS. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-103.5.4 release preparationv3.5.4Dan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-10pacman/util: flush terminal input before reading responseDave Reisner1-2/+3
Addresses FS#20538 Conflicts: src/pacman/util.c Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org> (cherry picked from commit 9477abc3591905a20acbfe7b8ce7832617d72701)
2011-07-18configure: output more compile settingsAllan McRae1-0/+4
Add information on CPPFLAGS, LDFLAGS and LIBS to the end of the configure output. This is very helpful in tracing issues when adjusting the configure file and also will allow us to more easily replicate any issues discovered due to a users build environment. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-24po/: split into scripts/po/ and src/pacman/po/Dan McGee1-1/+2
This is the first step at separating the pacman message catalog and the scripts message catalog. Makefiles, configure.ac, and other such files are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of scripts is also adjusted. Note that no actual pot or po files get changed here; these will get pruned in a future commit so each catalog contains only the necessary messages. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-24Let configure gettext setup know we use ngettext()Dan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Merge branch 'maint'Dan McGee1-2/+2
Conflicts: src/pacman/callback.c
2011-06-023.5.3 release preparationDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-27configure: add output showing what libraries will be usedDan McGee1-3/+7
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-27Allow conditional compilation with GPGMEDan McGee1-2/+16
This makes it possible to omit usage of -lgpgme, just as we can do for -lcurl and -lcrypto. Thanks to Rémy Oudompheng for an initial stab at this. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-21Merge branch 'maint'Dan McGee1-2/+2
2011-04-18Final updates for 3.5.2 releasev3.5.2Dan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-02configure.ac: we use fabs now so -lm is neededXavier Chantry1-0/+3
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-28pacman/util: flush terminal input before reading responseDave Reisner1-2/+3
Addresses FS#20538 Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23buildsys: use libcurl's m4 macro for buildtime detectionDave Reisner1-16/+2
Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23Integrate GPGME into libalpmDan McGee1-0/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23Merge branch 'maint'Dan McGee1-2/+2
2011-03-23Bump version to 3.5.1Dan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-17Merge branch 'download'Dan McGee1-19/+12
2011-03-16Bump pacman versionsv3.5.0Dan McGee1-4/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-09Remove all traces of libfetchDave Reisner1-24/+0
Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09Add configure.ac option for --with-curlDave Reisner1-1/+18
To avoid breaking compilation, fetch defaults to 'no', and curl defaults to 'check'. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-02-11Check mountpoint read-only status when checking spaceDan McGee1-0/+4
This is a bit of a stopgap solution for the problem, but an easier one than revamping the file conflict checking code to support the same stuff. Using some more gross autoconf magic, figure out which struct field we need to look at to determine read-only status and store that on our mountpoint struct. If we find out we needed this partition after calculating size requirements, then toss an error. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Merge branch 'maint'Dan McGee1-2/+2
2011-01-213.4.3 release preparationDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Remove need for floating point division in backendDan McGee1-3/+0
All of these can be done with integer division; the only slightly interesting part is ensuring we round up like before with calling the ceil() function. We can also remove the math library from requirements; now that the only ceil() calls are gone, we don't need this anymore. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Use limits.h for PATH_MAXAllan McRae1-2/+2
We use PATH_MAX everywhere by including limits.h so there is no point in doing a check for it in a different header when dealing with FreeBSD's libfetch. Also, remove autoconf check for strings.h header as it is not used anywhere. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Detect undefined PATH_MAXAllan McRae1-1/+2
POSIX does not require PATH_MAX be defined when there is not actual limit to its value. This affects HURD based systems. Work around this by defining PATH_MAX to 4096 (as on Linux) when this is not defined. Also, clean up inclusions of limits.h and remove autoconf check for this header as we do not use macro shields for its inclusion anyway. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-15Merge branch 'maint'Dan McGee1-2/+2
2010-12-13Update news and bump versionsDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Refactor statfs/statvfs type checkDan McGee1-19/+3
Turn it into a configure-type typedef, which allows us to reduce the amount of duplicated code and clean up some #ifdef magic in the code itself. Adjust some of the other defined checks to look at the headers available rather than trying to pull in the right ones based on configure checks. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-12-13Add functions to calculate approximate disk usage by packagesAllan McRae1-0/+3
Two helper function are added to calculate the disk usage from packages that are either currently installed on the system or from a package archive. Some minor approximations have been made: 1. Size for directories is not considered when removing a package from the filesystem to avoid multiple counting across packages. Also, these are reported to take zero size while installing. 2. Symlinks are reported to contribute zero size towards removal as libarchive reports them to have zero size for install. 3. Package data files (.PKGINFO, .INSTALL, .CHANGELOG) are counted towards usage on dbpath on install, but their size is not counted on package removal. 4. No handling of extra size needed for .pacsave/.pacnew files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Add function for listing system mount pointsAllan McRae1-1/+21
Add a mount_point_list() function that attempts to portably obtain a list of system mount points and a struct to hold needed mount point information. Abort the transaction if we are unable to determine the mount points. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Remove AC_TYPE_SIGNAL usageDan McGee1-1/+0
This macro is deemed unnecessary by even the autoconf guys, so we really don't need to use it. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13dirent usage cleanupDan McGee1-0/+1
We were including the header in a lot of places it is no longer used. Additionally, use the correct autoconf macro for determining whether d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-14Fix bash shell location checkDan McGee1-1/+1
BASH is defined when you are actually using bash during configure, which sucks because it ends up being '/bin/sh', messing up all of our scripts. Change the name of the variable we use in configure, and also ensure we get a full path to the executable by using AC_PATH_PROGS rather than AC_CHECK_PROGS. Finally, change the variable name everywhere we use it. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-12Use sysconfdir, localstatedir, BASH instead of hardcoded valuesNezmer1-0/+1
This applies to contrib/ files, our scripts, and the documentation. Dan: fix 'make clean' in contrib/ directory. Signed-off-by: Nezmer <git@nezmer.info> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-11Only check for function if we are using libfetchDan McGee1-1/+3
We did this check unconditionally, rather than only doing it if we were actually going to build and run with libfetch. This is safe because we would have already bailed if libfetch was explicitly requested but not found. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-05Merge branch 'maint'Dan McGee1-1/+1
2010-10-05Check for python-2.7Allan McRae1-1/+1
Add python-2.7 to the list of checked versions of python and add a check for a python2 binary before resorting to the unversioned python binary. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-27Merge branch 'build-system'Dan McGee1-1/+1
2010-09-27Add FORTIFY_SOURCE supportAllan McRae1-0/+1
Adds a check for the minimum mainline GCC version for FORTIFY_SOURCE support and enables -D_FORTIFY_SOURCE=2 by default when building with --enable-debug. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-09-23Update build system (automake, autoconf, libtool)Dan McGee1-1/+1
Unfortunately this patch is hard to split up into smaller chunks. Our build system and the associated automake/autoconf/libtool macros has been left untouched for a while, and could use a refresher. * Upgrade ltmain.sh to the latest version * Move away from a huge acinclude.m4 directory to using individual files in the m4/ subdirectory, suggested by upstream automake documentation * Update all macros to their latest available version * Adjust Makefile.am and autogen.sh to accommodate m4/ subdirectory Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-06Fix libfetch configure checkingDan McGee1-1/+1
I don't know what I tested in commit 3e7b90ff6950, but it definitely wasn't working as advertised. Fix the checks in the source code itself to match the right define (HAVE_LIBFETCH), as well as make sure the configure check defaults to looking for the library but not bailing if it could not be found. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Clean up libfetch checking in configureDan McGee1-18/+16
Model it after the new OpenSSL check, and have it be a bit more useful. If you do not explicitly pass a command line option, it will be linked if available but will not error out if it is missing. Also bump the version to that where connection caching was introduced as we use these new features in the codebase. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Use OpenSSL MD5 crypto functions if availableDan McGee1-1/+18
I've noticed my Atom-powered laptop is dog-slow when doing integrity checks on packages, and it turns out our MD5 implementation isn't near as good as that provided by OpenSSL. Using their routines instead provided anywhere from a 1.4x up to a 1.8x performance benefit over our built-in MD5 function. This does not remove the MD5 code from our codebase, but it does enable linking against OpenSSL to get their much faster implementation if it is available on whatever platform you are using. At configure-time, we will default to using it if it is available, but this can be easily changed by using the `--with-openssl` or `--without-openssl` arguments to configure. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Merge branch 'maint'Dan McGee1-2/+2
2010-09-023.4.1 version bumpDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-07Remove DBEXT usageAllan McRae1-9/+0
With commit 5dffef78, the repo database always has a symlink of the form reponame.db. Use that filename and let libarchive determine the compression type. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-12-03 07:24:12 +0100